Specialized Testing of Asphalt Cements from Various ADOT&PF Paving Projects

The Alaska Department of Transportation and Public Facilities (ADOT&PF) sampled five different asphalt cements for specialized testing at Queen’s University in Kingston, Ontario. This report documents and discusses the findings. The tested asphalts were: PG 58-34, PG 52-40D, PG 52-40N, PG 58-28, and PG 64-28. Testing results showed that grade losses according to Ontario’s LS-308 Extended Bending Beam Rheometer (EBBR) ranged from 3.4°C to 6.3°C. Losses according to Ontario’s LS-228 Modified Pressure Aging Vessel (PAV) ranged from 0°C to 7.3°C. Grade losses of 3°C and higher are significant in terms of their ability to reduce pavement life cycles. Double-edge-notched tension (DENT) tests according to Ontario’s LS-299 DENT protocol were done on PAV residues. The critical crack tip opening displacement (CTOD) was determined and, at 15°C, it varied from a low of 19 mm for the PG 58-28 to a high of 175 mm for the PG 58-34. The PG 58- 40D showed a CTOD of 139 mm, contrasting with the low polymer PG 52-40N at only 36 mm, a nearly four-fold difference. All the results obtained from this specialized testing effort suggest that these materials will provide significant differences in performance. This report provides recommendations on how to obtain better value for money by implementing a few simple changes to the ADOT&PF asphalt cement specifications

Copper-catalysed selective hydroamination reactions of alkynes

The development of selective reactions that utilize easily available and abundant precursors for the efficient synthesis of amines is a long-standing goal of chemical research. Despite the centrality of amines in a number of important research areas, including medicinal chemistry, total synthesis and materials science, a general, selective and step-efficient synthesis of amines is still needed. Here, we describe a set of mild catalytic conditions utilizing a single copper-based catalyst that enables the direct preparation of three distinct and important amine classes (enamines, α-chiral branched alkylamines and linear alkylamines) from readily available alkyne starting materials with high levels of chemo-, regio- and stereoselectivity. This methodology was applied to the asymmetric synthesis of ​rivastigmine and the formal synthesis of several other pharmaceutical agents, including ​duloxetine, ​atomoxetine, ​fluoxetine and ​tolterodine.National Institutes of Health (U.S.) (GM58160

Reversible Aging in Asphalt Binders

X-ray diffraction, optical microscopy, and mass spectrometry techniques were used in an attempt to clarify the morphological and chemical features that are responsible for reversible aging processes that occur in asphalt binders during conditioning at low temperatures. The reversible aging term is used in this paper to capture all reversible processes (i.e., wax crystallization, free volume collapse, asphaltene aggregation, etc.) that lead to a reduction in low-temperature rheological and fracture performance. Crystalline content and asphaltene aggregate size at ambient temperatures, as measured by X-ray diffraction on thin asphalt films, are identified as two factors that correlate reasonably well with the reversible aging tendency at low temperatures. A coarse and unstable colloidal state for the asphaltene fraction is also identified as an important contributor to reversible aging. It was found that the saturates fraction has a particularly significant role in the aging process, with those asphalts containing higher amounts of linear paraffin losing more in terms of rheological performance. This important phenomenon is responsible for significant fracture distress in asphalt pavements in northern climates and therefore deserves further investigation. Some of the air-blown asphalts investigated in this study were found to show a high crystalline content and a coarse phase morphology and concurrent tendency for reversible aging during cold conditioning. This may be due to the crude source(s) employed, the chemistry of the air-blowing process, or resulting phase changes. Other air-blown binders did not show these features while they were still susceptible to reversible aging. Hence, the reason for this behavior appears to be due to multiple processes which are at present only poorly understood

Enhanced Acceptance Specification of Asphalt Binder to Drive Sustainability in the Paving Industry

Testing small amounts of extracted and recovered asphalt binder as used in construction allows for the acceptance of materials in accordance with traffic and climate requirements. This approach facilitates the sustainable use of resources and thus prepares the paving industry for the true circular economy. Oscillatory, creep, and failure tests in a rheometer are compared for the performance grading of 32 asphalt binders extracted and recovered from real-world contract samples. Films 8 mm in diameter and 0.5 mm thick were tested from 35 to −5 °C in dynamic shear, followed by shear creep at 0 and 5 °C, and finally in tertiary tensile creep at 15 °C. The enhanced protocol uses a very small amount of material in contrast to current methods, yet it provides comparable results. Phase angle measurements appear to be optimal for performance grading, but further field study is required to determine if additional binder properties such as stiffness and/or failure strain would be required for the control of cracking

Sound production by the West Australian dhufish (Glaucosoma hebraicum)

Biological examinations of Glaucosomatid fish species have suggested that they could produce sound via swimbladder vibration, using “sonic” muscles. However, there have been few reported instances of it in the family. West Australian dhufish (Glaucosoma hebraicum) is an iconic teleost, endemic to Western Australia. Dissection of G. hebraicum in this study identified the presence of “sonic” muscle pairs in immature and sexually mature individuals. The muscle tissue originates in the otic region of the skull with its insertion at the anterior of the swimbladder. Recordings of sounds were acquired from two male G. hebraicum, at a range of 1 m, during capture. Calls comprised 1 to 14 swimbladder pulses with spectral peak frequency of 154 ± 45 Hz (n = 67 calls) and 3 dB bandwidth of 110 ± 50 Hz. The mean of all call maximum source levels was 126 dB re 1 μPa at 1 m with the highest level at 137 dB re 1 μPa at 1 m. The confirmation of sound production by G. hebraicum and the acoustic characteristics of those sounds could be used to gain a better understanding of its ecology and, particularly, whether the production of sound is associated with specific behaviors, such as reproduction

Variations in life history characteristics of the deep-water giant ruby snapper (Etelis sp.) between the Indian and Pacific Oceans and application of a data-poor assessment

The giant ruby snapper, Etelis sp., attains the largest size of any lutjanid in the Indo-Pacific and is one of the most valuable species harvested from deep-water fisheries along the continental and insular shelf margins throughout its broad geographic distribution. Despite this species supporting important commercial, artisanal and subsistence fisheries, quantitative assessments of the status of stocks have been limited by an absence of biological information, unreliable catch and effort statistics, and until recently, misidentification with a cryptic congener. This study aimed, firstly, to describe and compare the age, growth and reproductive characteristics of Etelis sp. between the eastern Indian and western central Pacific Oceans; and secondly, to provide an age-based assessment of the stock in north-western Australia, the only stock for which available data were sufficient to quantify stock status. Although the growth of Etelis sp. differed significantly between sexes and oceans, longevity was similar with a maximum age of 56 years recorded in the Pacific Ocean. Spawning of this species occurred over five months during the austral summer to mid-autumn (i.e. December to April) in the Indian Ocean, but was not well defined in the Pacific Ocean. The estimated ages at 50 % maturity for females and males in the Indian Ocean were similar (i.e. 4-5 years), whereas lengths at 50 % maturity differed (L-50(mat) = 527 and 456 mm fork length, FL, respectively), but were consistent with corresponding differences in growth between sexes. Estimates of the relative female spawning potential ratio for Etelis sp. in north-western Australia suggest the status of this stock remained relatively unchanged from 1997 to 2011, at around 60 % of the unfished level. This assessment provides an example of the relative sustainable exploitation levels for this stock, and potentially other Eteline snappers that exhibit similar life history characteristics, particularly in locations where monitoring and assessments may be data and/or resource limited