Synthesis of Porous Inorganic Hollow Fibers without Harmful Solvents

A route for the fabrication of porous inorganic hollow fibers with high surface-area-to-volume ratio that avoids harmful solvents is presented. The approach is based on bio-ionic gelation of an aqueous mixture of inorganic particles and sodium alginate during wet spinning. In a subsequent thermal treatment, the bio-organic material is removed and the inorganic particles are sintered. The method is applicable to the fabrication of various inorganic fibers, including metals and ceramics. The route completely avoids the use of organic solvents, such as N-methyl-2-pyrrolidone, and additives associated with the currently used fiber fabrication methods. In addition, it inherently avoids the manifestation of so-called macro voids and allows the facile incorporation of additional metal oxides in the inorganic hollow fibers

Distillation membranaire avec des fibres creuses métalliques pour la concentration des solutions thermo-sensibles

Cette thèse présente une approche originale du procédé de distillation membranaire avec balayage gazeux pour la concentration des solutions thermosensibles (SGMD). Pour ce faire, un nouveau contacteur membranaire avec des fibres creuses métalliques a été conçu afin réaliser le procédé de distillation à basse température. La chaleur nécessaire au procédé est produite au niveau des fibres par effet Joule, plutôt qu'à partir de chaleur latente de la phase aqueuse. La génération localisée de la chaleur a comme conséquence une réduction du phénomène de polarisation de la température. Des fibres creuses en acier inoxydable ont été synthétisées avec les propriétés structurales appropriées et une bonne résistance mécanique. La surface des pores des fibres a été rendue hydrophobe par le dépôt d'une fine couche d'un élastomère. En outre, une nouvelle méthode « verte » a été développée pour fabriquer des fibres creuses en alumine et acier inoxydable. Cette méthode est basée sur la gélification ionique des bio-polymères et ne n'utilise pas des solvants nocifs. L'étude expérimentale détaillée du SGMD a permis de déterminer l'influence de différents paramètres opérationnels sur les performances du procédé. Il a été démontré que l'effet Joule permet d'améliorer le flux et l'efficacité de la séparation non seulement pour le SGMD mais aussi pour la pervaporation.This thesis presents an original approach for the concentration of thermo-sensitive solutions: the Sweep Gas Membrane Distillation (SGMD) process. A new membrane contactor with metallic hollow fibers has been designed and allows the distillation process to be operational at low temperature. Heat is generated in the fibers by the Joule effect, rather than being supplied as latent heat in the liquid bulk. The localized generation of heat results in a reduction of temperature polarization phenomena. The stainless-steel hollow fiber membranes have been synthetized with appropriate structural properties and sufficient mechanical strength. The pore surface of the fibers has been made hydrophobic by the deposition of a thin layer of an elastomer. Moreover, a novel and green method is presented to fabricate alumina and stainless-steel hollow fibers. This method is based on ionic gelation of a biopolymer and completely avoids the use of harmful solvents. By a detailed experimental study of the SGMD the influence of different operational parameters on the process performance has been investigated. The improvements in the flux and the separation efficiency using Joule effect have been successfully demonstrated, even in the case of pervaporation

Membrane distillation with porous metal hollow fibers for the concentration of thermo-sensitive solutions

This thesis presents an original approach for the concentration of thermo-sensitive solutions: the Sweep Gas Membrane Distillation (SGMD) process. A new membrane contactor with metallic hollow fibers has been designed and allows the distillation process to be operational at low temperature. Heat is generated in the fibers by the Joule effect, rather than being supplied as latent heat in the liquid bulk. The localized generation of heat results in a reduction of temperature polarization phenomena. The stainless-steel hollow fiber membranes have been synthetized with appropriate structural properties and sufficient mechanical strength. The pore surface of the fibers has been made hydrophobic by the deposition of a thin layer of an elastomer. Moreover, a novel and green method is presented to fabricate alumina and stainless-steel hollow fibers. This method is based on ionic gelation of a biopolymer and completely avoids the use of harmful solvents. By a detailed experimental study of the SGMD the influence of different operational parameters on the process performance has been investigated. The improvements in the flux and the separation efficiency using Joule effect have been successfully demonstrated, even in the case of pervaporation

Sweep gas membrane distillation in a membrane contactor with metallic hollow fibers

This work revolves around the use of porous metal hollow fibers in membrane distillation. Various stages are covered, starting from membrane synthesis up to the testing of a pilot scale membrane module. Mechanically stable metal hollow fibers have been synthesized by phase inversion of a stainless steel particle loaded polymer solution, followed by thermal treatment to remove the polymer and sinter the particles together. The pore surface of the metal fibers has been made hydrophobic by functionalization with polydimethylsiloxane or stearic acid. A water evaporation flux of 0.2 kg h−1 m−2 was obtained at a feed water temperature of 333 K and a sweep gas flow rate of 135 L h−1 (Reair=2458) with pure water as feed. Under similar operating conditions, an evaporation flux of 0.14 kg h−1 m−2 was achieved when a 600 g L−1 sucrose solution was used as feed

Sweep gas membrane distillation in a membrane contactor with metallic hollow-fibers

© 2015 Elsevier B.V. This work revolves around the use of porous metal hollow fibers in membrane distillation. Various stages are covered, starting from membrane synthesis up to the testing of a pilot scale membrane module. Mechanically stable metal hollow fibers have been synthesized by phase inversion of a stainless steel particle loaded polymer solution, followed by thermal treatment to remove the polymer and sinter the particles together. The pore surface of the metal fibers has been made hydrophobic by functionalization with polydimethylsiloxane or stearic acid. A water evaporation flux of 0.2kgh-1m-2 was obtained at a feed water temperature of 333K and a sweep gas flow rate of 135Lh-1 (Reair=2458) with pure water as feed. Under similar operating conditions, an evaporation flux of 0.14kgh-1m-2 was achieved when a 600gL-1 sucrose solution was used as feed.status: publishe