6,800 research outputs found
Controlling the Momentum Current of an Off-resonant Ratchet
We experimentally investigate the phenomenon of a quantum ratchet created by
exposing a Bose-Einstein Condensate to short pulses of a potential which is
periodic in both space and time. Such a ratchet is manifested by a directed
current of particles, even though there is an absence of a net bias force. We
confirm a recent theoretical prediction [M. Sadgrove and S. Wimberger, New J.
Phys. \textbf{11}, 083027 (2009)] that the current direction can be controlled
by experimental parameters which leave the underlying symmetries of the system
unchanged. We demonstrate that this behavior can be understood using a single
variable containing many of the experimental parameters and thus the ratchet
current is describable using a single universal scaling law.Comment: arXiv admin note: substantial text overlap with arXiv:1210.565
Sub-Fourier characteristics of a -kicked rotor resonance
We experimentally investigate the sub-Fourier behavior of a -kicked
rotor resonance by performing a measurement of the fidelity or overlap of a
Bose-Einstein condensate (BEC) exposed to a periodically pulsed standing wave.
The temporal width of the fidelity resonance peak centered at the Talbot time
and zero initial momentum exhibits an inverse cube pulse number ()
dependent scaling compared to a dependence for the mean energy width
at the same resonance. A theoretical analysis shows that for an accelerating
potential the width of the resonance in acceleration space depends on
, a property which we also verify experimentally. Such a sub-Fourier
effect could be useful for high precision gravity measurements.Comment: 4 pages, 5 figure
Solving hidden terminal problem in MU-MIMO WLANs with fairness and throughput-aware precoding and a degrees-of-freedom-based MAC design
© 2016, Shrestha et al. We generally emphasize that the zeroforcing (ZF) technique backed by an appropriate medium access control (MAC) protocol can be used to address the inevitable hidden terminal (HT) problem in multi-user multiple input multiple output (MU-MIMO) wireless local area network (WLAN) settings. However, to address the implementation-specific requirements of MU-MIMO WLANs, such as fairness in client access and throughput of the network, we propose a fairness and a throughput-aware ZF precoding in our design at the physical layer (PHY). This precoding scheme not only solves the HT problem but also meets the fairness and the throughput requirements of MU-MIMO WLANs. Besides, we design a MAC layer protocol, supportive to PHY, which decides transmission opportunities (TXOPs) among access points (APs) based on the available degrees of freedom (DoF). We make a mandatory provision in our design that APs should have a sufficient DoF. This can ensure collision-free transmission whenever APs/transmitters transmit in the HT scenario. Additionally, we design an improved channel sounding process for MU-MIMO WLANs with a less signaling overhead than IEEE802.11ac. We demonstrate the feasibility of our PHY in a USRP2/GNU Radio testbed prototype in the lab settings. It is found that our PHY improves the SNR and effective SNR of the received signal from about 5 to 11 dB in the HT scenario. The performance of our MAC design is checked with simulation studies in a typical six-antenna AP and clients scenario. We observe that our MAC protocol has a slightly higher signaling overhead than traditional ready to send/clear to send (RTS/CTS) due to design constraints; however, the signaling time overheads are reduced by 98.67 μs compared to IEEE802.11ac. Another interesting aspect to highlight is the constant Throughput gain of four to five times that of the traditional RTS/CTS. Our MAC protocol obtains this gain as early as 98.67 μs compared to IEEE802.11ac
Zeroforcing precoding based MAC design to address hidden terminals in MU-MIMO WLANs
© 2015 IEEE. This paper focuses on the Medium Access Control (MAC) layer design for an inevitable Hidden Terminal problem in Multi User Multiple Input Multiple Output (MU-MIMO) Wireless Local Area Networks (WLANs). Specifically, our MAC design is supported by the precoding vectors obtained by Zeroforcing technique which are used to address the Hidden Terminals. An efficient channel sounding process is used by our MAC protocol to obtain the Channel State Information (CSI) from the desired and undesired clients which are used to calculate the precoding vectors at the transmitters (Access Points). Our MAC design then uses these precoding vectors in order to null interferences among the undesired clients to avoid collision of signals and to maintain the concurrent transmissions among the desired clients. The the parameters such as network capacity, signaling overheads and fairness are considered in the design. Our MAC layer design shows a slightly higher signaling overhead compared to RTS/CTS scheme. However, due to the concurrent transmissions after the handshaking process, the cost of singling overheads are compensated. The simulation study of our MAC layer design shows a remarkable constant network capacity gain of 4-5 times in comparison to traditional RTS/CTS. Moreover, the gain is irrespective to the available air-time
Free charges versus excitons: photoluminescence investigation of InGaN/GaN multiple quantum well nanorods and their planar counterparts
InGaN/GaN multiple quantum well (MQW) nanorods have demonstrated significantly improved optical and electronic properties compared to their planar counterparts. However, the exact nature of the processes whereby nanorod structures impact the optical properties of quantum wells is not well understood, even though a variety of mechanisms have been proposed. We performed nanoscale spatially resolved, steady-state, and time-resolved photoluminescence (PL) experiments confirming that photoexcited electrons and holes are strongly bound by Coulomb interactions (i.e., excitons) in planar MQWs due to the large exciton binding energy in InGaN quantum wells. In contrast, free electron–hole recombination becomes the dominant mechanism in nanorods, which is ascribed to efficient exciton dissociation. The nanorod sidewall provides an effective pathway for exciton dissociation that significantly improves the optical performance of InGaN/GaN MQWs. We also confirm that surface treatment of nanorod sidewalls has an impact on exciton dissociation. Our results provide new insights into excitonic and charge carrier dynamics of quantum confined materials as well as the influence of surface states
Investigating Electronic, Optical, and Phononic Properties of Bulk γ-M<inf>2</inf>ON<inf>2</inf>and β-M<inf>7</inf>O<inf>8</inf>N<inf>4</inf>(M = Hf and Zr) Insulators Using Density Functional Theory
Hafnium and zirconium oxynitrides have similar properties, yet a consolidated investigation of their intrinsic properties has not been carried out. In this paper, we perform first-principles density functional theory calculations of γ- and β-phase hafnium and zirconium oxynitrides, which show that the γ-M2ON2(M = Hf and Zr) is an indirect band-gap (Eg) insulator, while the β-M7O8N4has a "pseudo-direct" type of Eg. β-phase has higher Egthan γ-phase, with concomitant disappearance of the conduction band tail. Optical properties in γ-M2ON2show that the anisotropy is negligible, and the optical constant values are in the range of other superhard materials. Phonon calculations present peculiar characteristics such as a small phonon band gap in γ-Hf2ON2and imaginary phonon frequencies in β-phases relating to lattice instability. The phononic properties are unfavorable for their potential use as an absorber material of the hot carrier solar cell-an emerging photovoltaic concept
Biosensors for Biodiesel Quality Sensing
A biosensor is an analytical device that uses biomaterials as elements of the sensing system and converts a biological response into an electrical signal. Biodiesel is a bio-based alternative, biodegradable, renewable, nontoxic diesel fuel made from a chemical reaction between alcohol (usually methanol or ethanol) and plant oil or animal fat. A need to provide accurate, real-time information for the quality sensing of biodiesel properties such as free and total glycerol has led to an ever-increasing demand for biosensor development. Being able to monitor specific physical and chemical properties is the prerequisite for developing a biosensor for quality sensing of the biodiesel. This article proposes a method for detection of the blend level of degraded biodiesel and lipase as a bioelement of biosensor systems. A design of an electrochemical potentiometric biosensor for quality sensing of biodiesel properties is proposed and discussed in detail. However, experimental trials, actual implementation and evaluations are necessary to understand the feasibility of the proposed biodiesel biosensor
Multichannel parametrization of \pi N scattering amplitudes and extraction of resonance parameters
We present results of a new multichannel partial-wave analysis for \pi N
scattering in the c.m. energy range 1080 to 2100 MeV. This work explicitly
includes \eta N and K \Lambda channels and the single pion photoproduction
channel. Resonance parameters were extracted by fitting partial-wave amplitudes
from all considered channels using a multichannel parametrization that is
consistent with S-matrix unitarity. The resonance parameters so obtained are
compared to predictions of quark models
- …