Investigation of environmental change pattern in Japan. Investigation of variations in the prominent oceanic current, Kuroshio

The author has identified the following significant results. Rias shorelines are interpreted from the fine depiction of their complex features in the image of band 7. Sand beaches are discriminated from their linear nature, and the similarity of sand beaches among the all band is very good

Investigation of environmental change pattern in Japan. Classification of shorelines

The author has identified the following significant results. The sand beach was separated from sea water in each of four bands, if the beach had a width of 100 m or more. Density ranges of the sea for CCT counts were determined as 0-3 for band 7, 0-16 for band 6, 0-25 for band 5, and 0-27 for band 4

Investigation of environmental change pattern in Japan: Investigation of variations in the prominent oceanic current, Kuroshio

The author has identified the following significant results. In the print of MSS band 4 of Shiono Misaki and Ise taken by LANDSAT on 11 September 1975, different water masses can be recognized distinctly. At 35 miles off Shiono Misaki, a vortex pattern is found which has an ellipsoidal shape with a diameter of 30 miles and appears to rotate counterclockwise. In Ise, water masses were found spreading widely along the coast from the mouth of Ise Bay. The temperature of sea surface obtained from sea truth shows almost a uniform pattern. The distribution of surface salinity and transparency shows a distinct pattern

Investigation of environmental change pattern in Japan. Investigation of variations in the prominent oceanic current, Kuroshio

The author has identified the following significant results. It was confirmed that band 4 and 5 had some information as to the sea surface, such as spreading of coastal waters or eddy-like motion of surface water. It was concluded that the front line along the coast from Kumano-nada to Shiono-misaki in the monochromatic prints and in the pseudocolor images was a boundary between coastal waters and offshore water. Most of Ise Bay was covered by polluted water, having salinity values less than 30%, high water color scale of 6 to 8, and transparency less than 5 m

Excitation of Trapped g-Mode Oscillations in Warped Disks around Black Holes

In order to study the origin of high-frequency quasi-periodic oscillations observed in X-ray binaries, Kato (2004) suggested a resonant excitation mechanism of disk oscillations in deformed disks. In this paper, we study numerically, following his formulation, whether trapped g-mode oscillations in a warped disk, where the warp amplitude varies with radius, can be excited by this mechanism. For simplicity, we adopt Newtonian hydrodynamic equations with relativistic expressions for the characteristic frequencies of disks. We also assume that the accretion disk is isothermal. We find that the fundamental modes of trapped g-mode oscillations with eigenfrequencies close to the maximum of epycyclic frequency are excited. The intermediate oscillations found are isolated in a narrow region around the resonance radius. After varying some parameters, we find that the growth rate increases as the warp amplitude or the black hole spin parameter increases, while it decreases as the sound speed increases.Comment: 20 pages, 4 figures, accepted for publication in PAS

Continuous monitoring of back wall stress corrosion cracking growth in sensitized type 304 stainless steel weldment by means of potential drop techniques

Stress corrosion cracking (SCC) tests on welded specimens of sensitized type 304SS with a thickness of 20 mm were performed in sodium thiosulphate solution at room temperature, with continuous monitoring of the SCC growth, using the techniques of modified induced current potential drop (MICPD), alternating current potential drop (ACPD) and direct current potential drop (DCPD). The MICPD and DCPD techniques permit continuous monitoring of the back wall SCC, which initiates from a fatigue pre-crack at a depth of about 4 mm, from which it propagates through more than 80% of the specimen thickness. The MICPD technique can decrease the effect of the current flowing in the direction of the crack length by focusing the induced current into the local area of measurement using induction coils, so that the sensitivity of the continuous monitoring of the back wall SCC is higher than that of the ACPD and DCPD techniques