Photothermal Polymer Nanocomposites of Tungsten Bronze Nanorods with Enhanced Tensile Elongation at Low Filler Contents

We present polymer nanocomposites of tungsten bronze nanorods (TBNRs) and ethylene propylene diene monomers (EPDM). The combination of these components allows the simultaneous enhancement in the mechanical and photothermal properties of the composites at low filler contents. The as-synthesized TBNRs had lengths and diameters of 14.0 +/- 2.4 nm and 2.5 +/- 0.5 nm, respectively, and were capped with oleylamine, which has a chemical structure similar to EPDM, making the TBNRs compatible with the bulk EPDM matrix. The TBNRs absorb a wide range of near-infrared light because of the sub-band transitions induced by alkali metal doping. Thus, the nanocomposites of TBNRs in EPDM showed enhanced photothermal properties owing to the light absorption and subsequent heat emission by the TBNRs. Noticeably, the nanocomposite with only 3 wt% TBNRs presented significantly enhanced tensile strain at break, in comparison with those of pristine EPDM, nanocomposites with 1 and 2 wt % TBNRs, and those with tungsten bronze nanoparticles, because of the alignment of the nanorods during tensile elongation. The photothermal and mechanical properties of these nanocomposites make them promising materials for various applications such as in fibers, foams, clothes with cold weather resistance, patches or mask-like films for efficient transdermal delivery upon heat generation, and photoresponsive surfaces for droplet transport by the thermocapillary effect in microfluidic devices and microengines

Local Hall effect in hybrid ferromagnetic/semiconductor devices

We have investigated the magnetoresistance of ferromagnet-semiconductor devices in an InAs two-dimensional electron gas system in which the magnetic field has a sinusoidal profile. The magnetoresistance of our device is large. The longitudinal resistance has an additional contribution which is odd in applied magnetic field. It becomes even negative at low temperature where the transport is ballistic. Based on the numerical analysis, we confirmed that our data can be explained in terms of the local Hall effect due to the profile of negative and positive field regions. This device may be useful for future spintronic applications.Comment: 4 pages with 4 fugures. Accepted for publication in Applied Physics Letter

Substituted Azolium Disposition: Examining the Effects of Alkyl Placement on Thermal Properties

We describe the thermal phase characteristics of a series of 4,5-bis(n-alkyl)azolium salts that were studied using thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), polarized-light optical microscopy (POM), and synchrotron-based small- to wide-angle X-ray scattering (SWAXS) measurements. Key results were obtained for 1,3-dimethyl-4,5-bis(n-undecyl)imidazolium iodide (1-11), 1,3-dimethyl-4,5-bis(n-pentadecyl)imidazolium iodide (1-15), and 1,2,3-trimethyl-4,5-bis(n-pentadecyl)imidazolium iodide (2), which were found to adopt enantiotropic smectic A mesophases. Liquid-crystalline mesophases were not observed for 1,3-dimethyl-4,5-bis(n-heptyl)imidazolium iodide (1-7), 3-methyl-4,5-bis(n-pentadecyl)thiazolium iodide (3), and 2-amino-4,5-bis(n-pentadecyl)imidazolium chloride (4). Installing substituents in the 4- and 5-positions of the imidazolium salts appears to increase melting points while lowering clearing points when compared to data reported for 1,3-disubstituted analogues

Multi-Color Luminescence Transition of Upconversion Nanocrystals via Crystal Phase Control with SiO2 for High Temperature Thermal Labels

Upconversion nanocrystals (UCNs)-embedded microarchitectures with luminescence color transition capability and enhanced luminescence intensity under extreme conditions are suitable for developing a robust labeling system in a high-temperature thermal industrial process. However, most UCNs based labeling systems are limited by the loss of luminescence owing to the destruction of the crystalline phase or by a predetermined luminescence color without color transition capability. Herein, an unusual crystal phase transition of UCNs to a hexagonal apatite phase in the presence of SiO2 nanoparticles is reported with the enhancements of 130-fold green luminescence and 52-fold luminance as compared to that of the SiO2-free counterpart. By rationally combining this strategy with an additive color mixing method using a mask-less flow lithography technique, single to multiple luminescence color transition, scalable labeling systems with hidden letters-, and multi-luminescence colored microparticles are demonstrated for a UCNs luminescence color change-based high temperature labeling system

Shear-solvo defect annihilation of diblock copolymer thin films over a large area

Achieving defect-free block copolymer (BCP) nanopatterns with a long-ranged orientation over a large area remains a persistent challenge, impeding the successful and widespread application of BCP self-assembly. Here, we demonstrate a new experimental strategy for defect annihilation while conserving structural order and enhancing uniformity of nanopatterns. Sequential shear alignment and solvent vapor annealing generate perfectly aligned nanopatterns with a low defect density over centimeter-scale areas, outperforming previous single or sequential combinations of annealing. The enhanced order quality and pattern uniformity were characterized in unprecedented detail via scattering analysis and incorporating new mathematical indices using elaborate image processing algorithms. In addition, using an advanced sampling method combined with a coarse-grained molecular simulation, we found that domain swelling is the driving force for enhanced defect annihilation. The superior quality of large-scale nanopatterns was further confirmed with diffraction and optical properties after metallized patterns, suggesting strong potential for application in optoelectrical devices

Synchrotron X-ray reflectivity studies of nanoporous organosilicate thin films with low dielectric constants

Quantitative, non-destructive X-ray reflectivity analysis using synchrotron radiation sources was successfully performed on nanoporous dielectric thin films prepared by thermal processing of blend films of a thermally curable polymethylsilsesquioxane dielectric precursor and a thermally labile triethoxy-silyl-terminated six-arm poly(epsilon-caprolactone) porogen in various compositions. In addition, thermogravimetric analysis and transmission electron microscopy analysis were carried out. These measurements provided important structural information about the nanoporous films. The thermal process used in this study was found to cause the porogen molecules to undergo efficiently sacrificial thermal degradation, generating closed, spherical nanopores in the dielectric film. The resultant nanoporous films exhibited a homogeneous, well defined structure with a thin skin layer and low surface roughness. In particular, no skin layer was formed in the porous film imprinted using a porogen loading of 30 wt%. The film porosities ranged from 0 to 33.8% over the porogen loading range of 0-30 wt%open131

A better method of predicting face changes after cosmetic surgery: the partial least squares regression.

Accurate prediction of post-surgery face changes is an essential step in the treatment planning of cosmetic surgery. During cosmetic treatment in facial deformity patients, the face does not directly follow the surgical skeletal movements in the underlying bony structures. The algorithms of currently available commercial programs are all based upon the 1-to-1 correspondence ratio and/or the ordinary least squares methods, which is far from being accurate. Predicting face changes after surgery requires a number of variables to consider. Human face landmarks in face photos and x-rays have a 2-dimensional entity. A landmark (or variable) has 2 measurements in the x-axis and the y-axis. A certain degree of vertical repositioning surgery induces horizontal relocation also and vice versa. Furthermore, the face response at a specific face landmark is highly dependent on its adjacent response, and its neighboring points are also dependent on each other. Applying the PLS method would be a solution for prediction and interpretation of this highly correlated 2-dimensional situation. Therefore, the aim of the present study is to propose a better statistical method of predicting face changes after cosmetic surgery by applying the partial least squares regression. In addition, we will also discuss a method to report error analyses for 2-dimensional data. Previously published error reports of 2-dimensional data sets have inappropriately applied 1-dimensional approaches, such as differences in distance or angular measurements. Our visualization method can be applied to 2- dimensional data sets. This method shows errors in both the x-axis and the y-axis simultaneously, which can also identify any between-group differences.OAIID:oai:osos.snu.ac.kr:snu2014-01/104/0000030821/2SEQ:2PERF_CD:SNU2014-01EVAL_ITEM_CD:104USER_ID:0000030821ADJUST_YN:NEMP_ID:A076080DEPT_CD:861CITE_RATE:0FILENAME:2014년03월03일 abstract_pls2014_word_2pages.pdfDEPT_NM:치의학과CONFIRM: