Terrestrial solar thermionic energy conversion systems concept

Results obtained from studies of a (1) solar concentrator, (2) solar energy receiver - thermionic converter system, and (3) solar thermionic topping system are described. Peripheral subsystems, which are required for any solar energy conversion system, are also discussed

A study of changes in fishing effort, abundance, and yield for yellowfin and skipjack tuna in the Eastern Tropical Pacific Ocean

ENGLISH: The rapid growth of the Eastern Pacific fishery for yellowfin and skipjack tuna since the end of World War II has given rise to questions concerning the rational utilization of these resources. As part of the Inter-American Tropical Tuna Commission's program of research designed to investigate these problems, a study was undertaken to determine from the historical records of the fishery the effects of fishing upon the stocks of yellowfin and skipjack tuna of the Eastern Pacific region and to evaluate the present condition of these stocks with respect to the maximum equilibrium yield. SPANISH: EI rápido crecimiento, desde la terminación de la Segunda Guerra Mundial, de la pesquería de atún aleta amarilla y barrilete en el Pacifico Oriental, ha dado lugar a que se hagan algunos comentarios sabre la racional utilización de estos recursos. Como parte del programa de la Comisión Interamericana del Atún Tropical designado para la investigación de estos problemas, un estudio fué llevado a cabo para determinar, de los informes historicós de la pesquería, los efectos de la pesca sobre los stocks de atún aleta amarilla y barrilete de la región del Pacifico Oriental y para evaluar la presente condición de estos stocks con respecto al máximo rendimiento de equilibria. (PDF contains 123 pages.

A study of the Eastern Pacific fishery for tuna baitfishes, with particular reference to the anchoveta (Cetengraulis mysticetus)

ENGLISH: Most of the catches of yellowfin and skipjack tuna from the Eastern Pacific Ocean are made by vessels fishing with poles and lines and live bait. From 1931 to 1954, these baitboats, on the average, accounted for over three-fourths of the total annual California landings of yellowfin and skipjack (Shimada and Schaefer, 1956). With the substantial increase in recent years in the production of the tropical tunas, there have been greater demands for live bait. This increased need for larger amounts of baitfishes has given rise to important questions relating to the manner in which these populations may be most wisely used. The Inter-American Tropical Tuna Commission has been concerned with various aspects of this problem since its establishment in 1950. This report presents some of the results obtained from the Commission's studies of the baitfishes important to the fishery for yellowfin and skipjack tuna. It traces briefly the origin and development of the bait fishery, describes its operations, extent, and yield, and discusses some aspects of the effects of exploitation upon the Eastern Pacific baitfish populations, particularly of the anchoveta (Cetengaulis mysticetus). SPANISH: Los barcos que emplean cañas y cuerdas y carnada viva, son los que realizan la mayor parte de la pesca de atún aleta amarilla y barrilete en el Océano Pacifíco Oriental. De 1931 a 1954 estos barcos han desembarcado, en promedio, más de las tres cuartas partes de las pescas anuales de ambas especies (Shimada y Schaefer, 1956). Con el aumento sustancial en dicha producción en los últimos años, ha habido una mayor demanda por carnada viva. Esta creciente necesidad de obtener cantidades mayores de pecescebo, ha originado importantes cuestiones relativas a la mejor forma en que estas poblaciones pueden ser utilizadas. A la Comisión Interamericana del Atún Tropical le ha tocado ocuparse de varios aspectos de este problema, desde que fué establecida en el año 1950. Este informe ofrece algunos de los resultados obtenidos a través de los estudios de la Comisión sobre los peces-cebo importantes para la pesquería de atún aleta amarilla y barrilete; señala brevemente el origen y desarrollo de la pesquería de carnada; describe sus operaciones, extensión y rendimiento, y trata algunos aspectos de los efectos de la explotación sobre las poblaciones de dichos peces en el Pacifíco Oriental, particularmente de la anchoveta (Cetengraulis mysticetus). (PDF contains 59 pages.

Sintering and properties of Si3N4 with and without additives by HIP treatment

Hot Isostatic Pressing (HIP) of Si3N4 powders with and without additives was performed using a glass container, and various kinds of pressureless-sintered Si3N4 were HIP'ed without a container. The effects of HIP treatment on density, microstructure, flexural strength, microhardness, and fracture toughness on Si3N4 ceramics were studied. Using a glass container it was difficult to reach theoretical density. The microhardness of HIP'ed Si3N4 without additives was low, and the fracture toughness of HIP'ed Si3N4 with and without additives was 22 to 25 W/m-K, and it decreased with increasing the amount of additives. The density and flexural strength, and hardness of pressureless-sintered Si3N4 which contained Al2O and Y2O3 as oxide additives were remarkably improved by HIP treatment using nitrogen as a pressure transmitting gas. It is very important to select the sintering conditions for fabricating the presintered body of Si3N4 in order to improve the mechanical properties of Si3N4 by HIP treatment

Fabrication and characterization of Si3N4 ceramics without additives by high pressure hot pressing

High pressure hot-pressing of Si3N4 without additives was performed using various kinds of Si3N4 powder as starting materials, and the relation between densification and alpha-beta phase transformation was studied. The temperature dependences of Vickers microhardness and fracture toughness were also examined. Densification of Si3N4 was divided into three stages, and it was found that densification and phase transformation of Si3N4 under pressure were closely associated. The results of the temperature dependence of Vickers microhardness indicated that the high-temperature hardness was strongly influenced not only by the density and microstructure of sintered body but also by the purity of starting powder. The fracture toughness values of Si3N4 bodies without additives were 3.29-4.39 MN/m to the 3/2 power and independent of temperature up to 1400 C

Curved Space (Matrix) Membranes

Hamiltonian formulations of M-branes moving in curved backgrounds are given

Gate-controlled generation of optical pulse trains using individual carbon nanotubes

We report on optical pulse-train generation from individual air-suspended carbon nanotubes under an application of square-wave gate voltages. Electrostatically-induced carrier accummulation quenches photoluminescence, while a voltage sign reversal purges those carriers, resetting the nanotubes to become luminescent temporarily. Frequency domain measurements reveal photoluminescence recovery with characteristic frequencies that increase with excitation laser power, showing that photoexcited carriers quench the emission in a self-limiting manner. Time-resolved measurements directly confirm the presence of an optical pulse train sychronized to the gate voltage signal, and flexible control over pulse timing and duration is demonstrated.Comment: 4 pages, 4 figure