819 research outputs found
Smooth Particle Hydrodynamics-Based Characteristics of a Shaped Jet from Different Materials
The liner material is one of the key factors in the design of armor-piercing ammunition that effect the penetration efficiency. The performance of a shaped jet formed by the charge liner is determined by different properties of the material under the blasting action, in particular for the target with explosive reactive armor, which diminishes the penetration power by dispersing the shaped jet. The performance of shaped jet elements from different materials is studied, AUTODYN finite element software and smooth particle hydrodynamics method are employed to simulate the formation of shaped jet elements from the three materials: Cu, PTFE, and PTFE/Cu and their penetration into target plates, which was verified in the experiment. A shaped jet for a Cu liner is shown to be formed under the action of a detonation wave, while PTFE and PTFE/Cu materials generate a dispersive particle jet. The head velocity of a Cu jet is found to be the lowest, the penetration depth is the deepest, and the penetration hole size is the smallest; the velocity of a PTFE particle jet is the highest and the penetration depth is the shallowest, the penetration hole size takes the mid-position; the head velocity and penetration depth of a PTFE/Cu jet take the mid-position, while the penetration hole is the largest. The PTFE/Cu jet possesses higher penetration performance as compared to the PTFE jet, and its hole-opening capability is improved as compared to the Cu jet.Облицовочный материал один из ключевых факторов при создании бронебойных боеприпасов, оказывающий влияние на эффективность внедрения. Работоспособность кумулятивного заряда, формируемого его облицовкой, определяется различными свойствами материала в условиях взрывной нагрузки, в частности для мишени с элементами динамической защиты, которые уменьшают проникающую способность, рассеивая кумулятивный заряд. Изучены рабочие характеристики элементов кумулятивного заряда из различных материалов. Конечноэлементное программное обеспечение AUTODYN и метод гидродинамики гладких частиц используются при моделировании формирования этих элементов и их внедрении в пластинымишени из трех материалов: Cu, ПТФЭ и ПТФЭ/Сu, что было проверено экспериментально. Показано, что кумулятивный заряд для медной облицовки формируется под действием детонационной волны, тогда как ПТФЭ и ПТФЭ/Cu материалы генерируют струю распыленных частиц. Установлено, что в головной части скорость струи частиц Сu наименьшая, глубина внедрения наибольшая, а размер отверстий наименьший, скорость струи частиц ПТФЭ наибольшая, глубина внедрения наименьшая, размер отверстий занимает среднее положение, скорость и глубина внедрения струи частиц ПТФЭ/Сu занимают среднее положение, тогда как отверстия имеют наибольший размер. Струя частиц ПТФЭ/Сu обладает более высокой эффективностью внедрения по сравнению со струей ПТФЭ, а ее проникающая способность выше, чем струи Cu.Облицювальний матеріал - один з ключових чинників при створенні бронебійних боєприпасів, який впливає на ефективність заглиблення. Працездатність кумулятивного заряду, який формується його облицюванням, визначається різними властивостями матеріалу в умовах вибухового навантаження, зокрема для мішені з елементами динамічного захисту, які зменшують проникаючу здатність, розсіюючи кумулятивний заряд. Вивчено робочі характеристики елементів кумулятивного заряду з різних матеріалів.
Скінчнноелементне програмне забезпечення AUTODYN і метод гідродинаміки гладких частинок використовуються при моделюванні формування цих елементів і їх впровадженні в пластини-мішені з трьох матеріалів: Cu, ПТФЕ і ПТФЕ / Cu, що було перевірено експериментально. Показано, що кумулятивний заряд для мідного облицювання формується під дією детонаційної хвилі, тоді як ПТФЕ і ПТФЕ / Cu матеріали генерують струмінь розпорошених частинок. Встановлено, що в головній частині швидкість струменя частинок Cu найменша, глибина заглиблення найбільша, а розмір отворів менший, швидкість струменя частинок ПТФЕ найбільша, глибина заглиблення найменша, розмір отворів займає середнє положення, швидкість і глибина заглиблення струменя частинок ПТФЕ / Cu займають середнє положення, тоді як отвори мають найбільший розмір. Струмінь частинок ПТФЕ / Cu володіє більш високою ефективністю заглиблення в порівнянні зі струменем ПТФЕ, а її проникаюча здатність вище, ніж струменя Cu
Critical Currents and Vortex States at Fractional Matching Fields in Superconductors with Periodic Pinning
We study vortex states and dynamics in 2D superconductors with periodic
pinning at fractional sub-matching fields using numerical simulations. For
square pinning arrays we show that ordered states form at 1/1, 1/2, and 1/4
filling fractions while only partially ordered states form at other filling
fractions, such as 1/3 and 1/5, in agreement with recent imaging experiments.
For triangular pinning arrays we observe matching effects at filling fractions
of 1/1, 6/7, 2/3, 1/3, 1/4, 1/6, and 1/7. For both square and triangular
pinning arrays we also find that, for certian sub-matching fillings, vortex
configurations depend on pinning strength. For weak pinning, ordering in which
a portion of the vortices are positioned between pinning sites can occur.
Depinning of the vortices at the matching fields, where the vortices are
ordered, is elastic while at the incommensurate fields the motion is plastic.
At the incommensurate fields, as the applied driving force is increased, there
can be a transition to elastic flow where the vortices move along the pinning
sites in 1D channels and a reordering transition to a triangular or distorted
triangular lattice. We also discuss the current-voltage curves and how they
relate to the vortex ordering at commensurate and incommensurate fields.Comment: 14 figure
The ARGO-YBJ Experiment Progresses and Future Extension
Gamma ray source detection above 30TeV is an encouraging approach for finding
galactic cosmic ray origins. All sky survey for gamma ray sources using wide
field of view detector is essential for population accumulation for various
types of sources above 100GeV. To target the goals, the ARGO-YBJ experiment has
been established. Significant progresses have been made in the experiment. A
large air shower detector array in an area of 1km2 is proposed to boost the
sensitivity. Hybrid detection with multi-techniques will allow a good
discrimination between different types of primary particles, including photons
and protons, thus enable an energy spectrum measurement for individual specie.
Fluorescence light detector array will extend the spectrum measurement above
100PeV where the second knee is located. An energy scale determined by balloon
experiments at 10TeV will be propagated to ultra high energy cosmic ray
experiments
High Altitude test of RPCs for the ARGO-YBJ experiment
A 50 m**2 RPC carpet was operated at the YangBaJing Cosmic Ray Laboratory
(Tibet) located 4300 m a.s.l. The performance of RPCs in detecting Extensive
Air Showers was studied. Efficiency and time resolution measurements at the
pressure and temperature conditions typical of high mountain laboratories, are
reported.Comment: 16 pages, 10 figures, submitted to Nucl. Instr. Met
BESII Detector Simulation
A Monte Carlo program based on Geant3 has been developed for BESII detector
simulation. The organization of the program is outlined, and the digitization
procedure for simulating the response of various sub-detectors is described.
Comparisons with data show that the performance of the program is generally
satisfactory.Comment: 17 pages, 14 figures, uses elsart.cls, to be submitted to NIM
Direct Measurements of the Branching Fractions for and and Determinations of the Form Factors and
The absolute branching fractions for the decays and
are determined using singly
tagged sample from the data collected around 3.773 GeV with the
BES-II detector at the BEPC. In the system recoiling against the singly tagged
meson, events for and events for decays are observed. Those yield
the absolute branching fractions to be and . The
vector form factors are determined to be
and . The ratio of the two form
factors is measured to be .Comment: 6 pages, 5 figure
Study of J/psi decays to Lambda Lambdabar and Sigma0 Sigma0bar
The branching ratios and Angular distributions for J/psi decays to Lambda
Lambdabar and Sigma0 Sigma0bar are measured using BESII 58 million J/psi.Comment: 11 pages, 5 figure
Measurements of J/psi Decays into 2(pi+pi-)eta and 3(pi+pi-)eta
Based on a sample of 5.8X 10^7 J/psi events taken with the BESII detector,
the branching fractions of J/psi--> 2(pi+pi-)eta and J/psi-->3(pi+pi-)eta are
measured for the first time to be (2.26+-0.08+-0.27)X10^{-3} and
(7.24+-0.96+-1.11)X10^{-4}, respectively.Comment: 11 pages, 6 figure
- …