2,006 research outputs found
Tracing the Initiation of the Tribeč Mountain Exhumation by Laser-Probe <sup>40</sup>Ar/<sup>39</sup>Ar Dating of Seismogenic Pseudotachylytes (Western Carpathians, Slovakia)
The seismogenic pseudotachylytes from the Tribeč Mountains (Western Carpathians, Slovakia) were dated by means of the laser microprobe 40Ar/39Ar method. The Tribeč Mountain crystalline basement was buried to 5–7.5-km depths, where it experienced approximately >110°C and <210°C thermal conditions. The dated pseudotachylytes have spot ages between 58 ± 1 and 46 ± 1 Ma with a weighted mean age of 49.7 ± 1.3 Ma, indicating that seismic activity caused their origin, the propagation of subvertical basement marginal faults, and/or the inception of basement unroofing processes in the southern part of the Central Carpathian Paleogene Basin. The extensional tectonics were responsible for the exhumation of basement highs and the opening of the intramontane depressions on the northwest margin of the Pannonian Basin
Novel techniques to cool and rotate Bose-Einstein condensates in time-averaged adiabatic potentials
We report two novel techniques for cooling and rotating Bose-Einstein
condensates in a dilute rubidium vapour that highlight the control and
versatility afforded over cold atom systems by time-averaged adiabatic
potentials (TAAPs). The intrinsic loss channel of the TAAP has been
successfully employed to evaporatively cool a sample of trapped atoms to
quantum degeneracy. The speed and efficiency of this process compares well with
that of conventional forced rf-evaporation. In an independent experiment, we
imparted angular momentum to a cloud of atoms forming a Bose-Einstein
condensate by introducing a rotating elliptical deformation to the TAAP
geometry. Triangular lattices of up to 60 vortices were created. All findings
reported herein result from straightforward adjustments of the magnetic fields
that give rise to the TAAP.Comment: The first two authors contributed equally to this wor
Technical innovation changes standard radiographic protocols in veterinary medicine: is it necessary to obtain two dorsoproximal-palmarodistal oblique views of the equine foot when using computerised radiography systems?
Since the 1950s, veterinary practitioners have included two separate dorsoproximal–palmarodistal oblique (DPr–PaDiO) radiographs as part of a standard series of the equine foot. One image is obtained to visualise the distal phalanx and the other to visualise the navicular bone. However, rapid development of computed radiography and digital radiography and their post-processing capabilities could mean that this practice is no longer required. The aim of this study was to determine differences in perceived image quality between DPr–PaDiO radiographs that were acquired with a computerised radiography system with exposures, centring and collimation recommended for the navicular bone versus images acquired for the distal phalanx but were subsequently manipulated post-acquisition to highlight the navicular bone. Thirty images were presented to four clinicians for quality assessment and graded using a 1–3 scale (1=textbook quality, 2=diagnostic quality, 3=non-diagnostic image). No significant difference in diagnostic quality was found between the original navicular bone images and the manipulated distal phalanx images. This finding suggests that a single DPr–PaDiO image of the distal phalanx is sufficient for an equine foot radiographic series, with appropriate post-processing and manipulation. This change in protocol will result in reduced radiographic study time and decreased patient/personnel radiation exposure
From the surface to the seafloor: How giant larvaceans transport microplastics into the deep sea.
Plastic waste is a pervasive feature of marine environments, yet little is empirically known about the biological and physical processes that transport plastics through marine ecosystems. To address this need, we conducted in situ feeding studies of microplastic particles (10 to 600 μm in diameter) with the giant larvacean Bathochordaeus stygius. Larvaceans are abundant components of global zooplankton assemblages, regularly build mucus "houses" to filter particulate matter from the surrounding water, and later abandon these structures when clogged. By conducting in situ feeding experiments with remotely operated vehicles, we show that giant larvaceans are able to filter a range of microplastic particles from the water column, ingest, and then package microplastics into their fecal pellets. Microplastics also readily affix to their houses, which have been shown to sink quickly to the seafloor and deliver pulses of carbon to benthic ecosystems. Thus, giant larvaceans can contribute to the vertical flux of microplastics through the rapid sinking of fecal pellets and discarded houses. Larvaceans, and potentially other abundant pelagic filter feeders, may thus comprise a novel biological transport mechanism delivering microplastics from surface waters, through the water column, and to the seafloor. Our findings necessitate the development of tools and sampling methodologies to quantify concentrations and identify environmental microplastics throughout the water column
Validation of purdue engineering shape benchmark clusters by crowdsourcing
The effective organization of CAD data archives is central to PLM and consequently content based retrieval of 2D drawings and 3D models is often seen as a "holy grail" for the industry. Given this context, it is not surprising that the vision of a "Google for shape", which enables engineers to search databases of 3D models for components similar in shape to a query part, has motivated numerous researchers to investigate algorithms for computing geometric similarity. Measuring the effectiveness of the many approaches proposed has in turn lead to the creation of benchmark datasets against which researchers can compare the performance of their search engines. However to be useful the datasets used to measure the effectiveness of 3D retrieval algorithms must not only define a collection of models, but also provide a canonical specification of their relative similarity. Because the objective of shape retrieval algorithms is (typically) to retrieve groups of objects that humans perceive as "similar" these benchmark similarity relationships have (by definition) to be manually determined through inspection
Trapping Ultracold Atoms in a Time-Averaged Adiabatic Potential
We report the first experimental realization of ultracold atoms confined in a
time-averaged, adiabatic potential (TAAP). This novel trapping technique
involves using a slowly oscillating ( kHz) bias field to time-average the
instantaneous potential given by dressing a bare magnetic potential with a high
frequency ( MHz) magnetic field. The resultant potentials provide a
convenient route to a variety of trapping geometries with tunable parameters.
We demonstrate the TAAP trap in a standard time-averaged orbiting potential
trap with additional Helmholtz coils for the introduction of the radio
frequency dressing field. We have evaporatively cooled 5 atoms of
Rb to quantum degeneracy and observed condensate lifetimes of over
\unit[3]{s}.-Comment: 4 pages, 6 figure
Recommended from our members
A laser probe <sup>40</sup>Ar /<sup>39</sup>Ar and INAA investigation of four Apollo granulitic breccias
Infrared laser probe 40Ar/39Ar geochronology, instrumental neutron activation analysis (INAA) and analytical electron microscopy have been performed on four 0.5 x 1.0 x 0.3 cm polished rock tiles of Apollo 16 and 17 granulitic breccias (60035, 77017, 78155, and 79215). Pyroxene thermometry indicates that these samples were re-equilibrated and underwent peak metamorphic sub-solidus recrystallization at
1000 – 1100°C, which resulted in homogeneous mineral compositions and granoblastic textures.
40Ar/39Ar data from this study reveal that three samples (60035, 77017, and 78155) have peak metamorphic ages of ~4.1 Ga. Sample 79215 has a peak metamorphic age of 3.9 Ga, which may be related to Serenitatis basin formation. All four samples contain moderately high concentrations of meteoritic siderophiles. Enhanced siderophile contents in three of the samples provide evidence for projectile
contamination of their target lithologies occurring prior to peak metamorphism.
Post-peak metamorphism, low-temperature (<300ºC) events caused the partial resetting of argon in the two finer-grained granulites (60035 and 77017). These later events did not alter the mineralogy or texture of the rocks, but caused minor brecciation and the partial release of argon from plagioclase. Interpretation of the low-temperature data indicates partial resetting of the argon systematics to as young as 3.2 Ga for 60035 and 2.3 Ga for 77017. Cosmic ray exposure ages range from 6.4 to ~339 Ma.
Our results increase the amount of high-precision data available for the granulitic breccias and lunar highlands crustal samples. The results demonstrate the survival of pre-Nectarian material on the lunar surface and document the effects of contact metamorphic and impact processes during the pre-Nectarian Epoch, as well as the low-temperature partial resetting of ages by smaller impact events after 3.9 Ga.
The mineralogy and chemical composition of these rocks, as well as exhumation constraints, indicate that the source of heat for metamorphism was within kilometres of the surface via burial beneath impact melt sheets or hot ejecta blankets
Tunable fibre-coupled multiphoton microscopy with a negative curvature fibre
Negative curvature fibre (NCF) guides light in its core by inhibiting the coupling of core and cladding modes. In this work, an NCF was designed and fabricated to transmit ultrashort optical pulses for multiphoton microscopy with low group velocity dispersion (GVD) at 800 nm. Its attenuation was measured to be <0.3 dB m(-1) over the range 600-850 nm and the GVD was -180 ± 70 fs(2) m(-1) at 800 nm. Using an average fibre output power of ∼20 mW and pulse repetition rate of 80 MHz, the NCF enabled pulses with a duration of <200 fs to be transmitted through a length of 1.5 m of fibre over a tuning range of 180 nm without the need for dispersion compensation. In a 4 m fibre, temporal and spectral pulse widths were maintained to within 10% of low power values up to the maximum fibre output power achievable with the laser system used of 278 mW at 700 nm, 808 mW at 800 nm and 420 mW at 860 nm. When coupled to a multiphoton microscope, it enabled imaging of ex vivo tissue using excitation wavelengths from 740 nm to 860 nm without any need for adjustments to the set-up
Observation of centimetre-scale argon diffusion in alkali feldspars: implications for <sup>40</sup>Ar/<sup>39</sup>Ar thermochronology
New data from a gem-quality feldspar from Itrongay, Madagascar, record naturally occurring 40Ar/39Ar age profiles which can be numerically modelled by invoking a single diffusion mechanism and show that microtexturally simple crystals are capable of recording complex thermal histories. We present the longest directly measured, naturally produced 40Ar*-closure profiles from a single, homogeneous orthoclase feldspar. These data appear to confirm the assumption that laboratory derived diffusion parameters are valid in nature and over geological timescales. Diffusion domains are defined by crystal faces and ancient cracks, thus in gem-quality feldspars the diffusion domain size equates to the physical grain size. The data also illustrate the potential of large, gem-quality feldspars to record detailed thermal histories over tens of millions of years and such samples should be considered for future studies on the slow cooling of continental crust
Self-Assessment and Planned Change of Placement and Career Services Center
In the 1990s, college and university career services and placement units face many challenges which may influence their success including (a) increased budgetary constraints, (b) changing student demographics, (c) increased availability of computer technologies, (d) new service delivery models, and (e) changing employer recruitment practices. In an effort to address these issues and examine its role within the university (Roth, 1994), the Placement and Career Information Center (PCIC) at Central Michigan University undertook a program of applied research, self-assessment and planned change. The purpose of this article is to briefly report our experiences in conducting this program of applied research. The assessment strategy is presented in the first part of this report. Next, the methods used to collect data and assessment, sampling procedures and response rates are described. Following this, highlights of the assessment results are presented including a summary of some changes already made and those planned for the future. The results of this study are presented in detail in Adams, et at. (1994)
- …