4,766 research outputs found
Feasibility study of a 110 watt per kilogram lightweight solar array system
An investigation of the feasibility of a solar array panel subsystem which will produce 10,000 watts of electrical output at 1 A.U. with an overall beginning-of-life power-to-weight ratio of at least 110 watt/kg is reported. A description of the current baseline configuration which meets these requirements is presented. A parametric analysis of the single boom, two blanket planar solar array system was performed to arrive at the optimum system aspect ratio. A novel concept for the stiffening of a lightweight solar array by canting the solar cell blankets at a small angle to take advantage of the inherent in-plane stiffness to increase the symmetric out-of-plane frequency is introduced along with a preliminary analysis of the stiffening effect. A comparison of welded and soldered solar cell interconnections leads to the conclusion that welding is required on this ultralightweight solar array. The use of a boron/aluminum composite material in a BI-STEM type deployable boom is investigated as a possible advancement in the state-of-the-art
Graphene field-effect transistors based on boron nitride gate dielectrics
Graphene field-effect transistors are fabricated utilizing single-crystal
hexagonal boron nitride (h-BN), an insulating isomorph of graphene, as the gate
dielectric. The devices exhibit mobility values exceeding 10,000 cm2/V-sec and
current saturation down to 500 nm channel lengths with intrinsic
transconductance values above 400 mS/mm. The work demonstrates the favorable
properties of using h-BN as a gate dielectric for graphene FETs.Comment: 4 pages, 8 figure
Solitary Waves and Compactons in a class of Generalized Korteweg-DeVries Equations
We study the class of generalized Korteweg-DeVries equations derivable from
the Lagrangian: L(l,p) = \int \left( \frac{1}{2} \vp_{x} \vp_{t} - {
{(\vp_{x})^{l}} \over {l(l-1)}} + \alpha(\vp_{x})^{p} (\vp_{xx})^{2} \right)
dx, where the usual fields of the generalized KdV equation are
defined by u(x,t) = \vp_{x}(x,t). This class contains compactons, which are
solitary waves with compact support, and when , these solutions have the
feature that their width is independent of the amplitude. We consider the
Hamiltonian structure and integrability properties of this class of KdV
equations. We show that many of the properties of the solitary waves and
compactons are easily obtained using a variational method based on the
principle of least action. Using a class of trial variational functions of the
form we
find soliton-like solutions for all , moving with fixed shape and constant
velocity, . We show that the velocity, mass, and energy of the variational
travelling wave solutions are related by , where , independent of .\newline \newline PACS numbers: 03.40.Kf,
47.20.Ky, Nb, 52.35.SbComment: 16 pages. LaTeX. Figures available upon request (Postscript or hard
copy
Electronic compressibility of layer polarized bilayer graphene
We report on a capacitance study of dual gated bilayer graphene. The measured
capacitance allows us to probe the electronic compressibility as a function of
carrier density, temperature, and applied perpendicular electrical displacement
D. As a band gap is induced with increasing D, the compressibility minimum at
charge neutrality becomes deeper but remains finite, suggesting the presence of
localized states within the energy gap. Temperature dependent capacitance
measurements show that compressibility is sensitive to the intrinsic band gap.
For large displacements, an additional peak appears in the compressibility as a
function of density, corresponding to the presence of a 1-dimensional van Hove
singularity (vHs) at the band edge arising from the quartic bilayer graphene
band structure. For D > 0, the additional peak is observed only for electrons,
while D < 0 the peak appears only for holes. This asymmetry that can be
understood in terms of the finite interlayer separation and may be useful as a
direct probe of the layer polarization
Research on Long-Term Care Homes for Older People in Brazil: Protocol for Scoping Review
LOTUS CONSORTIUM - Improving care in Long-term Care Institutions in Brazil and Europe through Collaboration and ResearchBackground
The fast growth of the ageing population in low and middle-income countries, such as Brazil, has allowed little time for social and health care systems to adapt. As the care needs for the most vulnerable and frail older people become increasingly complex, services and governments need to ensure that long term care homes deliver high-quality and evidence-based care to meet their healthcare needs.
Aim
To examine and map the range of research undertaken in Brazil regarding care homes published in peer reviewed journals.
Method
This scoping review will consider all relevant peer-reviewed primary studies fully or partly conducted in Brazilian care homes including those which consider workforce (for example, e.g. healthcare professionals, care staff, and management level staff) and care home residents (older people aged 60 years and above), using empirical and original research focused on any health related topic. The searches will be conducted using bibliographic databases (MEDLINE, EMBASE, LILACS and Google Scholar) and manual searching of the reference lists of relevant studies published in English, Portuguese or Spanish from inception up to 2018. Two authors will independently screen each document by title and abstract against the eligibility criteria. In case of disagreement, a third reviewer will be consulted. Data from the included studies will be extracted and reported using tables, graphs, and narrative accounts using elements of content analysis. The Mixed Methods Appraisal Tool will be used to appraise the methodological quality of the included studies
Space suit
A pressure suit for high altitude flights, particularly space missions is reported. The suit is designed for astronauts in the Apollo space program and may be worn both inside and outside a space vehicle, as well as on the lunar surface. It comprises an integrated assembly of inner comfort liner, intermediate pressure garment, and outer thermal protective garment with removable helmet, and gloves. The pressure garment comprises an inner convoluted sealing bladder and outer fabric restraint to which are attached a plurality of cable restraint assemblies. It provides versitility in combination with improved sealing and increased mobility for internal pressures suitable for life support in the near vacuum of outer space
- …