Imaging of Iso-frequency Contours via Resonance-Enhanced Scattering in Near-Pristine Photonic Crystals

The iso-frequency contours of a photonic crystal are important for predicting and understanding exotic optical phenomena that are not apparent from high-symmetry band structure visualizations. Here, we demonstrate a method to directly visualize the iso-frequency contours of high-quality photonic crystal slabs that shows quantitatively good agreement with numerical results throughout the visible spectrum. Our technique relies on resonance-enhanced photon scattering from generic fabrication disorder and surface roughness, so it can be applied to general photonic and plasmonic crystals, or even quasi-crystals. We also present an analytical model of the scattering process, which explains the observation of iso-frequency contours in our technique. Furthermore, the iso-frequency contours provide information about the characteristics of the disorder and therefore serve as a feedback tool to improve fabrication processes.Comment: 8 pages, 5 figure

Genetic algorithm based optimization for terahertz time-domain adaptive sampling

We propose a genetic algorithm (GA) based method to improve the sampling efficiency in THz time domain spectroscopy (THz-TDS). For a typical time domain THz signal, most information are contained in a short region of the pulse which needs to be densely sampled, while the other regions fluctuating around zero can be represented by fewer points. Based on this clustering feature of the THz signal, we can use much fewer sampling points and optimize the distribution by using a GA to achieve an accurate scanning in less time. Both reflection and transmission measurements were conducted to experimentally verify the performance. The measurement results show that the sampling time can be greatly reduced while maintaining very high accuracy both in the time-domain and frequency-domain compared with a high-resolution step scan. This method significantly improves the measurement efficiency. It can be easily adapted to most THz-TDS systems equipped with a mechanical delay stage for fast detection and THz imaging

Orbital Support of Fast and Slow Inner Bars in Double Barred Galaxies

We analyze how the orbital support of the inner bar in a double-barred galaxy (nested bars) depends on the angular velocity (i.e. pattern speed) of this bar. We study orbits in seven models of double bars using the method of invariant loops. The range of pattern speed is covered exhaustively. We find that not all pattern speeds are allowed when the inner bar rotates in the same direction as the outer bar. Below a certain minimum pattern speed orbital support for the inner bar abruptly disappears, while at high values of this speed the orbits indicate an increasingly round bar that looks more like a twist in the nuclear isophotes than a dynamically independent component. For values between these two extremes, orbits supporting the inner bar extend further out as the bar's pattern speed decreases, their corresponding loops become more eccentric, pulsate more, and their rotation becomes increasingly non-uniform, as they speed up and slow down in their motion. Lower pattern speeds also lead to a less coherent bar, as the pulsation and acceleration increasingly varies among the loops supporting the inner bar. The morphologies of fast and slow inner bars expected from the orbital structure studied here are recently recovered observationally by decomposition of double barred galaxies. Our findings allow us to link the observed morphology to the dynamics of the inner bar.Comment: ApJ accepte

A wide range and high resolution one-filtration molecular weight cut-off method for aqueous based nanofiltration and ultrafiltration membranes

A new and superior one-filtration method for the determination of the molecular weight cut-off (MWCO) of aqueous based nanofiltration and ultrafiltration membranes has been developed using the widest range of polyethylene glycol oligomers as MWCO probes of any MWCO method so far. This method was enabled by a new, high resolution oligomer separation and detection using high performance liquid chromatography (HPLC) coupled with an evaporative light scattering detector (ELSD). The refined method can determine the MWCO of membranes over a MW range from 678 to 4594 g mol−1 with a molecular weight difference of just 44 g mol−1 and a bonus further one point extension to 6000 g mol−1 – giving the widest range and most precise difference of MWs that can be resolved of any single filtration MWCO method that exists. MWCO determination of five commercial membranes from GE Osmonics™ and Millipore showed good agreement with manufacturer and literature values, confirming the accuracy of the method. As this new method has significant advantages over all other existing aqueous MWCO determinations (i.e. single filtration, higher resolution over a wider MW range, low cost MWCO molecular probes), it is suggested that it could be adopted as the new standard for determining aqueous MWCO over a MW range from 678 to 6000 g mol−1

The atypical mammalian ligand Delta-like homologue 1 (Dlk1) can regulate Notch signalling in Drosophila

<p>Abstract</p> <p>Background</p> <p>Mammalian <it>Delta-like 1 </it>(<it>Dlk-1</it>) protein shares homology with Notch ligands but lacks a critical receptor-binding domain. Thus it is unclear whether it is able to interact with Notch <it>in vivo</it>. Unlike mammals, <it>Drosophila </it>have a single Notch receptor allowing a simple <it>in vivo </it>assay for mammalian <it>Dlk1 </it>function.</p> <p>Results</p> <p>Here we show that membrane-bound DLK1 can regulate Notch leading to altered cellular distribution of Notch itself and inhibiting expression of Notch target genes. The resulting adult phenotypes are indicative of reduced Notch function and are enhanced by <it>Notch </it>mutations, confirming that DLK1 action is antagonistic. In addition, cells expressing an alternative <it>Dlk1 </it>isoform exhibit alterations in cell size, functions previously not attributed to Notch suggesting that DLK1 might also act via an alternative target.</p> <p>Conclusion</p> <p>Our results demonstrate that DLK1 can regulate the Notch receptor despite its atypical structure.</p

Resolving spin, valley, and moir\'e quasi-angular momentum of interlayer excitons in WSe2/WS2 heterostructures

Moir\'e superlattices provide a powerful way to engineer properties of electrons and excitons in two-dimensional van der Waals heterostructures. The moir\'e effect can be especially strong for interlayer excitons, where electrons and holes reside in different layers and can be addressed separately. In particular, it was recently proposed that the moir\'e superlattice potential not only localizes interlayer exciton states at different superlattice positions, but also hosts an emerging moir\'e quasi-angular momentum (QAM) that periodically switches the optical selection rules for interlayer excitons at different moir\'e sites. Here we report the observation of multiple interlayer exciton states coexisting in a WSe2/WS2 moir\'e superlattice and unambiguously determine their spin, valley, and moir\'e QAM through novel resonant optical pump-probe spectroscopy and photoluminescence excitation spectroscopy. We demonstrate that interlayer excitons localized at different moir\'e sites can exhibit opposite optical selection rules due to the spatially-varying moir\'e QAM. Our observation reveals new opportunities to engineer interlayer exciton states and valley physics with moir\'e superlattices for optoelectronic and valleytronic applications

The role of tissue fluorescence in in vivo optical bioimaging

The following article appeared in Journal of Applied Physics 128.17 (2020): 171101 and may be found at https://doi.org/10.1063/5.0021854The technological advancements made in optics and semiconductors (e.g., cameras and laser diodes) working with infrared have brought interest in optical bioimaging back to the forefront of research investigating in vivo medical imaging techniques. The definition of the near-infrared transparency windows has turned optical imaging into more than just a method for topical imaging applications. Moreover, this has focused attention back to tissue fluorescence, emissions by tissues and organs that occur when excited by external illumination sources. Most endogenous fluorophores emit in the blue to green range of the electromagnetic spectrum and the resulting tissue fluorescence can be employed in studies from cells to tissue metabolism or avoided by shifting to the red if seen as unwanted autofluorescence. With the more recent move to infrared, it was discovered that autofluorescence is not limited to the visible but also strongly affects in vivo imaging in the infrared. In this Tutorial, we give an overview on tissue fluorescence and tissue interactions with excitation light as well as their effect on in vivo imaging. Furthermore, potential sources of tissue fluorescence in the near-infrared are identified and we describe approaches for successful biomedical imaging in the biological windows, taking into consideration infrared autofluorescence and summarizing techniques for avoiding it in in vivo imaging experimentsThis work was supported by the Spanish Ministry of Economy and Competitiveness under Project No. MAT2016-75362-C3-1-R, the Spanish Ministry of Sciences, Innovation and Universities under Project No. PID2019-106211RB-I00 (NANONERV), by the Instituto de Salud Carlos III (Nos. PI16/00812 and PI19/00565), and through the Comunidad Autónoma de Madrid (No. B2017/ BMD-3867RENIMCM), and co-financed by the European Structural and investment fund. Additional funding was provided by the European Union’s Horizon 2020 FET Open project NanoTBTech (Grant Agreement No. 801305), the Fundación para la Investigación Biomédica del Hospital Universitario Ramón y Cajal under Project No. IMP18_38(2018/0265), and also COST action CA17140. Y.S. acknowledges a scholarship from the China Scholarship Council (No.201806870023), E.X. is grateful for a Juan de la Cierva Formación scholarship (No. FJC2018-036734-I), and D.H.O. is thankful to the Instituto de Salud Carlos III for a Sara Borrell Fellowship (No. CD17/00210). The authors thank Dr. Blanca del Rosal for the helpful discussion and input on the manuscrip

Enhanced adsorption of cationic and anionic dyes from aqueous solutions by polyacid doped polyaniline

A new high surface area polyaniline (PANI) adsorbent was synthesized by matrix polymerization of aniline in the presence of a polyacid, poly(2-acrylamido-2-methyl-1-propanesulfonic acid) (PAMPSA). Morphological and physicochemical properties of PANI-PAMPSA were characterized by field emission scanning electron microscope (FESEM), Fourier transform infrared spectroscopy (FTIR), X-ray powder diffraction (XRD), nitrogen adsorption/desorption and zeta potential measurement. Adsorption properties were evaluated using methylene blue (MB) and rose bengal (RB) as model dyes.The results showed that PANI-PAMPSA obtained a well-defined porous structure with a specific surface area (126 m2 g−1) over 10 times larger than that of the emeraldine base PANI (PANI-EB) (12 m2 g−1). The maximum adsorption capacities were 466.5 mg g−1 for MB and 440.0 mg g−1 for RB, higher than any other PANI-based materials reported in the literature. The FTIR analysis and zeta potential measurement revealed that the adsorption mechanisms involved π-π interaction and electrostatic interaction. The adsorption kinetics were best described by a pseudo-second-order model, and the adsorption isotherms followed the Langmuir model. The thermodynamic study indicated that the adsorption was a spontaneous endothermic process. Overall, the convenient synthesis and the high adsorption capacity make PANI-PAMPSA a promising adsorbent material for dye removal

Exploiting the electrical conductivity of poly-acid doped polyaniline membranes with enhanced durability for organic solvent nanofiltration

We have developed stable organic solvent nanofiltration (OSN) membranes that are electrically conductive. These membranes overcome key issues with current tuneable membranes: molecular weight cut off (MWCO) limited to the UF-range and lack of filtration stability. Polyaniline (PANI) was in-situ doped by poly(2-acrylamido-2-methyl-1-propanesulfonic acid) (PAMPSA) using chemical oxidative polymerization that leads to formation of interpolymer complex. The PANI-PAMPSA membranes were prepared by phase inversion method and the pore sizes were shrunk by annealing the membranes at temperatures lower than the crosslinking temperature. The membranes were systematically evaluated using visual and chemical analysis and in-filtration experiments. The developed membranes were solvent stable, reusable, had a denser structure and lower MWCO and there was no thermal crosslinking as seen by IR. The solvent permeance obtained were: 0.46, 0.60 and 0.74 Lm −2 h −1 bar −1 for acetone, 2-propanol and methanol respectively, with MWCO below 300 Da and 266 Da for methanol. For the tuneability investigation, when applying an electrical potential (20 V) in a custom-made cross-flow membrane cell, an increase in MWCO and permeance (10.4% and 55.6%, respectively) was observed. These results show that this simple in-situ doping method with heat treatment can produce promising and stable PANI membranes, for OSN processes in different solvents, with the distinctive feature of in-situ performance control by applying external electrical potential. </p