Effect of Ascorbic Acid on Mineral and Bone Disorders in Hemodialysis Patients: a Systematic Review and Meta-Analysis

Background/Aims: Hemodialysis (HD) patients often have inadequate nutrition, especially with respect to ascorbic acid (AA). It is reported that every HD session may cause a 50%– 75% decrease in plasma AA levels. Some studies have shown that supplementation of AA can change the outcome of chronic kidney disease-mineral bone disorders (CKD-MBD), but the effect of AA on HD patients with CKD-MBD remains controversial. Consequently, we decided to perform a meta-analysis to evaluate the efficacy of AA supplementation in CKD-MBD patients requiring dialysis. Methods: A search was conducted using Pubmed, EMBASE, Cochrane Central Register of Controlled Trials, Chinese National Knowledge Infrastructure (CNKI), Wanfang database and VIP information database up to April 2018 for all English and Chinese language publications. The main indicators of our study were changes in serum phosphate (P), calcium (Ca) and parathyroid hormone (PTH) levels after AA treatment. The efficacy of AA was evaluated by weighted mean difference (WMD) and confidence intervals (CI). Cardiovascular events, mortality and adverse events reported during the experiment were also noted. Results: In total, 371 patients in six studies were involved in this meta-analysis. Compared to placebo, AA treatment had no positive effect on serum P (353 patients; WMD = -0.05; 95% CI, -0.3 to 0.2; I2 = 28%) or PTH levels (275 patients; WMD = -17.04; 95%CI, -63.79 to 29.72; I2 = 75%). The pooled mean difference of the change of Ca levels from baseline was higher in the AA therapy group versus placebo (353 patients; WMD = 0.15; 95% CI, 0.01 to 0.3; I2 = 0%). No side effects were observed. Conclusion: Our systematic review and meta-analysis does not support prescription of AA to HD patients with CKD-MBD. AA had no positive effect on CKD-MBD patients as it couldn’t influence the serum P or PTH levels but did raise serum Ca levels in the short-term

Design and Processing of a Novel Chaos-Based Stepped Frequency Synthesized Wideband Radar Signal

The linear stepped frequency and linear frequency shift keying (FSK) signal has been widely used in radar systems. However, such linear modulation signals suffer from the range–Doppler coupling that degrades radar multi-target resolution. Moreover, the fixed frequency-hopping or frequency-coded sequence can be easily predicted by the interception receiver in the electronic countermeasures (ECM) environments, which limits radar anti-jamming performance. In addition, the single FSK modulation reduces the radar low probability of intercept (LPI) performance, for it cannot achieve a large time–bandwidth product. To solve such problems, we propose a novel chaos-based stepped frequency (CSF) synthesized wideband signal in this paper. The signal introduces chaotic frequency hopping between the coherent stepped frequency pulses, and adopts a chaotic frequency shift keying (CFSK) and phase shift keying (PSK) composited coded modulation in a subpulse, called CSF-CFSK/PSK. Correspondingly, the processing method for the signal has been proposed. According to our theoretical analyses and the simulations, the proposed signal and processing method achieve better multi-target resolution and LPI performance. Furthermore, flexible modulation is able to increase the robustness against identification of the interception receiver and improve the anti-jamming performance of the radar

Grass modelling in data-limited areas by incorporating MODIS data products

202

Comparison of the Performance of Different Bile Salts in Enantioselective Separation of Palonosetron Stereoisomers by Micellar Electrokinetic Chromatography

Bile salts are a category of natural chiral surfactants which have ever been used as the surfactant and chiral selector for the separation of many chiral compounds by micellar electrokinetic chromatography (MEKC). In our previous works, the application of sodium cholate (SC) in the separation of four stereoisomers of palonosetron (PALO) by MEKC has been studied systematically. In this work, the parameters of other bile salts, including sodium taurocholate (STC), sodium deoxycholate (SDC), and sodium taurodeoxycholate (STDC) in the separation of PALO stereoisomers by MEKC were measured and compared with SC. It was found that all of four bile salts provide chiral recognition for both pairs of enantiomers, as well as achiral selectivity for diastereomers of different degrees. The structure of steroidal ring of bile salts has a greater impact on the separation than the structure of the side chain. The varying separation results by different bile salts were elucidated based on the measured parameters. A model to describe the contributions of the mobility difference of solutes in the aqueous phase and the selectivity of micelles to the chiral and achiral separation of stereoisomers was introduced. Additionally, a new approach to measure the mobility of micelles without enough solubility for hydrophobic markers was proposed, which is necessary for the calculation of separation parameters in MEKC. Under the guidance of derived equations, the separation by SDC and STDC was significantly improved by using lower surfactant concentrations. The complete separation of four stereoisomers was achieved in less than 3.5 min by using 4.0 mM of SDC. In addition, 30.0 mM of STC also provided the complete resolution of four stereoisomers due to the balance of different separation mechanisms. Its applicability for the analysis of a small amount of enantiomeric impurities in the presence of a high concentration of the effective ingredient was validated by a real sample

A new capillary gas chromatography column based on poly (ethylene glycol) methyl ether‐functionalized calix[4]arene

In this work, a novel capillary column (C4A-mPEG) with a calixarene-based polymers stationary phase (poly (ethylene glycol) methyl ether-functionalized 4-tert-butylcalix[4]arene) was designed and used for gas chromatographic (GC) separations. The C4A-mPEG capillary column, prepared by the static coating method, showed moderate polarity and a column efficiency of 2332 plates/m, determined by 1-octanol at 120 °C. The separation features of C4A-mPEG stationary phase, resulting from its unique structure and multiple molecular recognition processes with analytes, including π-π , H-bonding, dipole-dipole, and van der Waals interactions, allowed to obtain high-resolution performances for a wide range of compounds and their isomers, especially benzaldehydes, phenols, and anilines. Moreover, compared with 4-tertbutyl calix[4]arene (C4A) and polyethylene glycol (PEG) stationary phases, a higher resolving capability was also observed for the separation of toluidine and xylidine isomers

Amphiphilic Block Copolymer PCL-PEG-PCL as Stationary Phase for Capillary Gas Chromatographic Separations

This work presents the first example of utilization of amphiphilic block copolymer PCL-PEG-PCL as a stationary phase for capillary gas chromatographic (GC) separations. The PCL-PEG-PCL capillary column fabricated by static coating provides a high column efficiency of 3951 plates/m for n-dodecane at 120 °C. McReynolds constants and Abraham system constants were also determined in order to evaluate the polarity and possible molecular interactions of the PCL-PEG-PCL stationary phase. Its selectivity and resolving capability were investigated by using a complex mixture covering analytes of diverse types and positional, structural, and cis-/trans-isomers. Impressively, it exhibits high resolution performance for aliphatic and aromatic isomers with diverse polarity, including those critical isomers such as butanol, dichlorobenzene, dimethylnaphthalene, xylenol, dichlorobenzaldehyde, and toluidine. Moreover, it was applied for the determination of isomer impurities in real samples, suggesting its potential for practical use. The superior separation performance demonstrates the potential of PCL-PEG-PCL and related block copolymers as stationary phases in GC and other separation technologies

Increased Serum Level of MicroRNA-663 Is Correlated with Poor Prognosis of Patients with Nasopharyngeal Carcinoma

MicroRNAs (miRs) play crucial roles in the carcinogenesis and malignant progression of human cancers including nasopharyngeal carcinoma (NPC). In this study, we aimed to investigate the association of serum miR-663 levels with the clinical factors and prognosis of NPC patients. Real-time PCR was performed to examine the amount of miR-663 in serum in NPC patients and healthy controls. Our data showed that the amount of miR-663 in serum was significantly higher in NPC patients than in healthy controls. Moreover, the serum levels of miR-663 were significantly correlated with the grade, lymph node metastasis, and clinical stage of NPC. Furthermore, higher serum miR-663 levels were closely associated with worse 5-year overall survival (OS) and relapse-free survival (RFS) of patients with NPC, and the serum level of miR-663 was found to be an independent predicator for the prognosis of NPC. In addition, after receiving chemoradiotherapy, the serum levels of miR-663 were significantly reduced in NPC patients. In summary, miR-663 was upregulated in the serum of NPC patients, which was downregulated after chemoradiotherapy, and its increased levels were closely associated with malignant progression and poor prognosis in NPC patients. Therefore, the amount of miR-663 in serum may become a potential predicator for the clinical outcome of NPC patients

Lasing properties and carrier dynamics of CsPbBr3 perovskite nanocrystal vertical-cavity surface-emitting laser

All-inorganic lead halide perovskite nanocrystals (NCs) have been widely investigated as highly promising optical gain materials due to their compelling electrical and optical properties. Although many efforts have been carried out, a deep understanding of perovskite NC vertical-cavity surface-emitting lasers (VCSELs) is elusive, which is very important in the development of photoelectronic integrated circuits. Along these lines, in this work, a low lasing threshold (22 μJ/cm2) single-mode VCSEL consisting of CsPbBr3 NCs film and two distributed Bragg reflectors was successfully constructed. The CsPbBr3 NCs were synthesized by using the supersaturated recrystallization method. Interestingly, benefiting from the strong coupling between the active layer and the optical field in the cavity, a single-mode lasing at 527 nm was demonstrated under femtosecond optical pumping. The carrier dynamics of the perovskite NC VCSEL was also thoroughly investigated by performing pump intensity-dependent time-resolved photoluminescence measurements. The typical gain-switching phenomenon was observed with an ultrafast decay of the laser pulse of ∼10 ps. Our work provides valuable insights for the implementation of the CsPbBr3 NC VCSEL for various optoelectronic applications