Pyrolysis: A Sustainable Way to Generate Energy from Waste

Lignocellulosic biomass is a potentially more valuable renewable resource that can be utilized effusively as a chief source of heat for cooking and can correspondingly subsidize the production of electricity, heat, biofuels and chemicals including solid fuel like char or carbon. Lignocellulosic residues are mixed and burnt with coal to generate electricity. Presently, crude oil is replaced by bioethanol and biodiesel produced from biomass substrate. Some special class of chemicals can be derived from biomass that can subsequently replace the usage of non‐renewable resources of oil and coal. Pyrolysis of woody biomass to obtain pyroliginous acid was started hundreds of years ago, which has versatile applications. The range of products that can be derived from biomass is huge, prompting extent of research using different types of thermal conversion technologies, including pyrolysis, gasification, torrefaction, anaerobic digestion and hydrothermal processing. This chapter provides insights about the stages of reaction during pyrolysis and the outcome of reaction conditions on the products. Technical development and adjustment of process condition can offer a suitable environmentally benign scheme to increase the energy density of the lignocellulosic residues

Magnetically directed antioxidant and antimicrobial agent: synthesis and surface functionalization of magnetite with quercetin

Oxidative stress can be reduced substantially using nanoantioxidant materials by tuning its surface morphological features up to a greater extent. The physiochemical, biological and optical properties of the nanoantioxidants can be altered by controlling their size and shape. In view of that, an appropriate synthesis technique should be adopted with optimization of the process variables. Properties of magnetite nanoparticles (IONP) can be tailored to upgrade the performance of biomedicine. Present research deals with the functionalization IONP using a hydrophobic agent of quercetin (Q). The application of quercetin will control its size using both the functionalization method including in-situ and post-synthesis technique. In in-situ techniques, the functionalized magnetite nanoparticles (IONP@Q) have average particles size 6 nm which are smaller than the magnetite (IONP) without functionalization. After post functionalization technique, the average particle size of magnetite IONP@Q2 determined was 11 nm. The nanoparticles also showed high saturation magnetization of about 51–59 emu/g. Before starting the experimental lab work, Prediction Activity Spectra of Substances (PASS) software was used to have a preliminary idea about the biological activities of Q. The antioxidant activity was carried out using 2, 2-diphenyl-1-picrylhydrazyl (DPPH) assay. The antibacterial studies were carried out using well diffusion method. The results obtained were well supported by the simulated results. Furthermore, the values of the half maximal inhibitory concentration (IC50) of the DPPH antioxidant assay were decreased using the functionalized one and it exhibited a 2–3 fold decreasing tendency than the unfunctionalized IONP. This exhibited that the functionalization process can easily enhance the free radical scavenging properties of IONPs up to three times. MIC values confirms that functionalized IONP have excellent antibacterial properties against the strains used (Staphylococcus aureus, Bacillus subtilis and Escherichia coli) and fungal strains (Aspergillus niger, Candida albicans, Trichoderma sp. and Saccharomyces cerevisiae). The findings of this research showed that the synthesized nanocomposite has combinatorial properties (magnetic, antioxidant and antimicrobial) which can be considered as a promising candidate for biomedical applications. It can be successfully used for the development of biomedicines which can be subsequently applied as antioxidant, anti-inflammatory, antimicrobial and anticancer agents

A Review of Electrochemical Reduction of Sodium Metaborate

The recycling of sodium borohydride poses a huge challenge to the drive towards a hydrogen economy. Currently, mechano-chemical, thermo-chemical and electrochemical are the only reported methods of recycling sodium metaborate into sodium borohydride. Much attention has been devoted to the mechano-chemical and thermo-chemical methods of reduction, but little focus has been devoted to electrochemical methods. This review describes the electrochemical behaviour of borohydride (BH4−) and metaborate (BO2−) anions in alkaline solutions. The BH4− is stabilized in highly concentrated alkaline solutions, while the electro-oxidation of BH4− is dependent on the type of electrode material. The attempts to electro-reduce the BO2− into BH4− is reviewed and the challenges, suggestions and future outlook of electro-reduction for the recycling of BO2− into BH4− is highlighted

Effect of temperature on the physical, electro-chemical and adsorption properties of carbon micro-spheres using hydrothermal carbonization process

This research deals with the effect of the temperature on the physical, thermal, electrochemical, and adsorption properties of the carbon micro-spheres using hydrothermal carbonization (HTC). Until recently, limited research has been conducted regarding the effects of delignification during the HTC process of biomass residues especially Dimocarpus longan. In this regard, lignin was first extracted from the lingo-cellulosic waste of Longan fruit peel (Dimocarpus longan). The holocellulose (HC) separated from lignin and raw biomass substrates (Longan fruit exocarp/peel powder, LFP) were carbonized at different temperatures using water as the green catalyst. Hydrothermal carbonization (HTC) was performed for both of the samples (LFP and HC) at 200 °C, 250 °C, and 300 °C for 24 h each. The surface morphological structures, the porosity, and the Brunauer-Emmett-Teller (BET) surface area of the prepared micro-spherical carbon were determined. The BET surface areas obtained for HC-based carbon samples were lower than that of the raw LFP based carbon samples. The carbon obtained was characterized using ultimate and proximate analyses. The surface morphological features and phase transformation of the synthesized micro-spherical carbon was characterized by a field-emission scanning electron microscopy (FE-SEM) and X-ray diffraction (XRD) analysis. The results demonstrated that the extraction of lignin could significantly alter the end properties of the synthesized carbon sample. The carbon spheres derived from LFP showed a higher carbon content than the HC-based carbon. The absence of lignin in the holo-cellulose (HC) made it easy to disintegrate in comparison to the raw, LFP-based carbon samples during the HTC process. The carbonaceous samples (LFP-300 and HC-300) prepared at 300 °C were selected and their adsorption performance for Pb (II) cations was observed using Langmuir, Freundlich, and Temkin linear isotherm models. At 30 °C, the equilibrium data followed the Langmuir isotherm model more than the Freundlich and Temkin model for both the LFP-300 sample and the HC-300 sample. The potential of the synthesized carbon microspheres were further analyzed by thermodynamic characterizations of the adsorption equilibrium system

Decomposition-adsorption-deposition: An effective and novel technique for synthesis of hexagonal boron nitride microsheets

Magnesium diboride as a precursor with dual role of Nitrogen introduces a simple “decomposition-adsorption-deposition (DAD)” technique for the synthesis of Hexagonal Boron nitride microsheets (BNMSs) on silicon (Si) substrate at 1100 °C. The synthesized BNMSs has the apparent morphology like the white dispersed feathers on a plate surface with diameter in the range of 3–15 µm and lengt greater than 30 µm. All the BNMSs has the characteristics of h-BN lattice with an interlayer spacing of 0.34 nm. Boron and Nitrogen elemental compositions and h-BN phase of the synthesized BNMSs are verified from its characterization by X-ray photoelectron spectroscopy (XPS), Fourier transformed infrared (FTIR) spectroscopy and Raman