Quantitative Analysis of the Interactions of Metal Complexes and Amphiphilic Systems: Calorimetric, Spectroscopic and Theoretical Aspects

Metals and metal-based compounds have many implications in biological systems. They are involved in cellular functions, employed in the formation of metal-based drugs and present as pollutants in aqueous systems, with toxic effects for living organisms. Amphiphilic molecules also play important roles in the above bio-related fields as models of membranes, nanocarriers for drug delivery and bioremediating agents. Despite the interest in complex systems involving both metal species and surfactant aggregates, there is still insufficient knowledge regarding the quantitative aspects at the basis of their binding interactions, which are crucial for extensive comprehension of their behavior in solution. Only a few papers have reported quantitative analyses of the thermodynamic, kinetic, speciation and binding features of metal-based compounds and amphiphilic aggregates, and no literature review has yet addressed the quantitative study of these complexes. Here, we summarize and critically discuss the recent contributions to the quantitative investigation of the interactions of metal-based systems with assemblies made of amphiphilic molecules by calorimetric, spectrophotometric and computational techniques, emphasizing the unique picture and parameters that such an analytical approach may provide, to support a deep understanding and beneficial use of these systems for several applications

Mine clay washing residues as a source for alkali-activated binders

The aim of this paper is to promote the use of mine clay washing residues for the preparation of alkali activated materials (AAMs). In particular, the influence of the calcination temperature of the clayey by-product on the geopolymerization process was investigated in terms of chemical stability and durability in water. The halloysitic clay, a mining by-product, has been used after calcination and mixed with an alkaline solution to form alkali activated binders. Attention was focused on the influence of the clay’s calcination treatment (450–500–600◦C) on the geopolymers’ microstructure of samples, remaining in the lower limit indicated by the literature for kaolinite or illite calcination. The mixtures of clay and alkali activators (NaOH 8M and Na-silicate) were cured at room temperature for 28 days. The influence of solid to liquid ratio in the mix formulation was also tested in terms of chemical stability measuring the pH and the ionic conductivity of the eluate after 24-h immersion time in water. The results reported values of ionic conductivity higher for samples made with untreated clay or with low temperature of calcination (≥756 mS/m) compared with values of samples made with calcined clay (292 mS/m). This result suggests that without a proper calcination of the as-received clay it was not possible to obtain 25◦C-consolidated AAMs with good chemical stability and dense microstructure. The measures of integrity test, pH, and ionic conductivity in water confirmed that the best sample is made with calcined clay at 600◦C, being similar (53% higher ionic conductivity of the eluate) or equal (integrity test and pH) to values recorded for the metakaolin-based geopolymer considered the reference material. These results were reflected in term of reticulation and morphology of samples through the analysis with scanning electron microscope (SEM) and X-ray diffraction (XRD), which show a dense and homogeneous microstructure predominantly amorphous with minor amounts of quartz, halloysite, and illite crystalline phases. Special attention was dedicated to this by-product to promote its use, given that kaolinite (and metakaolin), as primary mineral product, has a strong impact on the environment. The results obtained led us to consider this halloysite clay very interesting as an aluminosilicate precursor, and extensively deepening its properties and reactivity for the alkaline activation. In fact, the heart of this work is to study the possibility of reusing this by-product of an industrial process to obtain more sustainable high-performance binders

Islanding, growth mode and ordering in Si heteroepitaxy on Ge(001) substrates structured by thermal annealing

Si/Ge heteroepitaxial dots under tensile strain are grown on nanostructured Ge substrates produced by high-temperature flash heating exploiting the spontaneous faceting of the Ge(001) surface close to the onset of surface melting. A very diverse growth mode is obtained depending on the specific atomic structure and step density of nearby surface domains with different vicinal crystallographic orientations. On highly-miscut areas of the Ge(001) substrate, the critical thickness for islanding is lowered to about 5 ML, in contrast to the 11 ML reported for the flat Ge(001) surface, while on unreconstructed (1x1) domains the growth is Volmer-Weber driven. An explanation is proposed considering the diverse relative contributions of step and surface energies on misoriented substrates. In addition, we show that the bottom-up pattern of the substrate naturally formed by thermal annealing determines a spatial correlation for the dot sites

Use of Foundry Sands in the Production of Ceramic and Geopolymers for Sustainable Construction Materials

The aim of this research was to evaluate the possibility of reusing waste foundry sands derived from the production of cast iron as a secondary raw material for the production of building materials obtained both by high-temperature (ceramic tiles and bricks) and room-temperature (binders such as geopolymers) consolidation. This approach can reduce the current demand for quarry sand and/or aluminosilicate precursors from the construction materials industries. Samples for porcelain stoneware and bricks were produced, replacing the standard sand contained in the mixtures with waste foundry sand in percentages of 10%, 50%, and 100% by weight. For geopolymers, the sand was used as a substitution for metakaolin (30, 50, 70 wt%) as an aluminosilicate precursor rather than as an aggregate to obtain geopolymer pastes. Ceramic samples obtained using waste foundry sand were characterized by tests for linear shrinkage, water absorption, and colorimetry. Geopolymers formulations, produced with a Si/Al ratio of 1.8 and Na/Al = 1, were characterized to evaluate their chemical stability through measurements of pH and ionic conductivity, integrity in water, compressive strength, and microstructural analysis. The results show that the addition of foundry sand up to 50% did not significantly affect the chemical-physical properties of the ceramic materials. However, for geopolymers, acceptable levels of chemical stability and mechanical strength were only achieved when using samples made with 30% foundry sand as a replacement for metakaolin

Sustainable Chromium Encapsulation: Alkali Activation Route

This article highlights recent experimental advances in the use of inorganic substances in the encapsulation of pollutants and, in particular, discusses the potential applicability and constraints of the geopolymerization process for the treatment of wastewater containing chromium. A great percentage of waste containing chromium salts is produced by the leather industry during the tannery process. Such industrial waste is in the form of liquor containing almost 40% of the initial chromium combined with many other pollutants. The stabilization/solidification (S/S) treatment of this type of waste must be combined with chromium encapsulation in an economic, environmentally friendly and efficient process to be industrially feasible. Here we present a novel process in which the wastewater is used as a component of the formulation together with a clay by-product and with the addition of NaOH pellets with the goal of a no-water plus no-waste technology approach. The final solidified “ceramic-like” material successfully immobilized the heavy metal cations as well as anions and macromolecules of surfactants, avoiding environmental damages to soil and groundwater. The article is completed by mentioning other S/S processes where wastewater has been treated and the resulting sludge encapsulated. The future of the S/S technologies in the tannery industry should progress in the direction of significantly reducing the amount of wastewater directed to the treatment plants, with associated reductions in transport and their CO2 emissions. This article intends to be a contribution in the direction of preventing waste, aligning circular economy and waste management objectives

Foundry sand alkali activation for sustainable construction

Please click Additional Files below to see the full abstract

Lanthanide Identity Governs Guest-Induced Dimerization in LnIII[15-MCCuIIN(L-pheHA)-5])3+ Metallacrowns

Series of lanthanide-containing metallic coordination complexes are frequently presented as structurally analogous, due to the similar chemical and coordinative properties of the lanthanides. In the case of chiral (LnIII[15-MC (Formula presented.) N(L-pheHA)-5])3+ metallacrowns (MCs), which are well established supramolecular hosts, the formation of dimers templated by a dicarboxylate guest (muconate) in solution of neutral pH is herein shown to have a unique dependence on the identity of the MC's central lanthanide. Calorimetric data and nuclear magnetic resonance diffusion studies demonstrate that MCs containing larger or smaller lanthanides as the central metal only form monomeric host-guest complexes whereas analogues with intermediate lanthanides (for example, Eu, Gd, Dy) participate in formation of dimeric host-guest-host compartments. The driving force for the dimerization event across the series is thought to be a competition between formation of highly stable MCs (larger lanthanides) and optimally linked bridging guests (smaller lanthanides)

Early stage of CVD graphene synthesis on Ge(001) substrate

In this work we shed light on the early stage of the chemical vapor deposition of graphene on Ge(001) surfaces. By a combined use of microRaman and x-ray photoelectron spectroscopies, and scanning tunneling microscopy and spectroscopy, we were able to individuate a carbon precursor phase to graphene nucleation which coexists with small graphene domains. This precursor phase is made of C aggregates with different size, shape and local ordering which are not fully sp2 hybridized. In some atomic size regions these aggregates show a linear arrangement of atoms as well as the first signature of the hexagonal structure of graphene. The carbon precursor phase evolves in graphene domains through an ordering process, associated to a re-arrangement of the Ge surface morphology. This surface structuring represents the embryo stage of the hills-and-valleys faceting featured by the Ge(001) surface for longer deposition times, when the graphene domains coalesce to form a single layer graphene film

Predictors of training-related improvement in visuomotor performance in patients with multiple sclerosis: A behavioural and MRI study

Background: The development of tailored recovery-oriented strategies in multiple sclerosis requires early identification of an individual’s potential for functional recovery. Objective: To identify predictors of visuomotor performance improvements, a proxy of functional recovery, using a predictive statistical model that combines demographic, clinical and magnetic resonance imaging (MRI) data. Methods: Right-handed multiple sclerosis patients underwent baseline disability assessment and MRI of the brain structure, function and vascular health. They subsequently undertook 4 weeks of right upper limb visuomotor practice. Changes in performance with practice were our outcome measure. We identified predictors of improvement in a training set of patients using lasso regression; we calculated the best performing model in a validation set and applied this model to a test set. Results: Patients improved their visuomotor performance with practice. Younger age, better visuomotor abilities, less severe disease burden and concurrent use of preventive treatments predicted improvements. Neuroimaging localised outcome-relevant sensory motor regions, the microstructure and activity of which correlated with performance improvements. Conclusion: Initial characteristics, including age, disease duration, visuo-spatial abilities, hand dexterity, self-evaluated disease impact and the presence of disease-modifying treatments, can predict functional recovery in individual patients, potentially improving their clinical management and stratification in clinical trials. MRI is a correlate of outcome, potentially supporting individual prognosis