Temperature increase inside LED-based illuminators for in vitro aPDT photodamage studies

Abstract Antimicrobial PhotoDynamic Therapy (aPDT) is an emerging strategy aimed at the eradication of bacterial infections, with a special focus on antibiotic-resistant bacteria. This method is easy to apply, not expensive and particularly interesting in case of bacteria that spontaneously produce the required photosensitizers. In the framework of a project aimed at the development of an ingestible pill for the application of aPDT to gastric infections by Helicobacter pylori, a LED-based illuminating prototype (LED-BIP) was purposely designed in order to evaluate the photodamage induced by light of different wavelengths on porphyrin-producing bacteria. This short paper reports about temperature tests performed to assess the maximum exposure time and light dose that can be administered to bacterial cultures inside LED-BIP without reaching temperatures exceeding the physiological range

Vineyard pruning residues pellets for use in domestic appliances: A quality assessment according to the EN ISO 17225

Nowadays many types of biomass are studied to satisfy the increased demand of renewable energy based on pellet combustion. However, only a few biomasses fulfil the high quality standard required for pellet used in domestic appliances. European and International standards in force define this quality of non-industrial use of pellets in term of the origin of biomass, physical, mechanical and chemical parameters. Vineyard residues are a worldwide potential source of energy but their compliance to be used in domestic pellet stoves has not been yet proven according to the new standards in force. In order to meet this need, this study makes an exhaustive characterisation of vineyard based pellets manufactured from residues of Prosecco (Glera variety) vineyards, assessing both the quality of biofuel and its behaviour during combustion in a domestic pellet stove. The quality of biofuel has been evaluated according to the in force standards for wood and non-woody pellets. The results show that vineyard pellets do not meet the type B quality standards required for non-industrial use of wood pellet mainly because of the high amount of ash content (&gt;2%) and the high amount of copper (&gt;10 ppm) but they fulfil the specifications of the type B non-woody pellets. Furthermore, during combustion test of vineyard-based pellet the high emission of CO indicates incomplete combustion; and vineyard- based pellet NOx emissions are more than double compared to those obtained during the control tests, confirming that the analysed vineyard-based pellets are unsuitable, as they are, for use in traditional pellet stoves.</jats:p

Multifunctional Epoxy/Nanocomposites Based on Natural Moroccan Clays with High Antimicrobial Activity: Morphological, Thermal and Mechanical Properties

In this study, a series of new epoxy/clay nanocomposites (ECN) has been prepared and characterized in order to investigate the properties and compare the effect of the unmodified Moroccan clay on the structure and properties of the composite materials. Five natural clays have been used to reinforce the neat epoxy resin with 1% wt and 5% wt achieving the clay dispersion only through strong milling and mechanical stirring without previous organic modifications of the clays. The quality of clay dispersion in the epoxy matrix and the morphology of nanocomposites have been studied by transmission electron microscopy (TEM), environmental scanning electron microscopy (ESEM), and X-ray diffraction (XRD). The mechanical and thermal properties have also been investigated. The antimicrobial activity of the nanocomposites has been tested against E. coli and S. aureus in order to evaluate their applicability as advanced antimicrobial materials. The results showed that the epoxy/crude clay nanocomposites exhibited a high inhibition action attending 99% against both bacteria in the case of the clay labeled A5

Enhancement of the Inelastic Nuclear Interaction Rate in Crystals via Antichanneling

The interaction rate of a charged particle beam with the atomic nuclei of a target varies significantly if the target has a crystalline structure. In particular, under specific orientations of the target with respect to the incident beam, the probability of inelastic interaction with nuclei can be enhanced with respect to the unaligned case. This effect, which can be named antichanneling, can be advantageously used in the cases where the interaction between beam and target has to be maximized. Here we propose to use antichanneling to increase the radioisotope production yield via cyclotron. A dedicated set of experimental measurements was carried out at the INFN Legnaro Laboratories with the AN2000 and CN accelerators to prove the existence of the antichanneling effect. The variation of the interaction yield at hundreds of keV to MeV energies was observed by means of sapphire and indium phosphide crystals, achieving an enhancement of the interaction rate up to 73% and 25%, respectively. Such a result may pave the way to the development of a novel type of nozzle for the existing cyclotrons, which can exploit crystalline materials as targets for radioisotope production, especially to enhance the production rate for expensive prime materials with minor upgrades of the current instrumentation

Multifunctional Epoxy/Nanocomposites Based on Natural Moroccan Clays with High Antimicrobial Activity: Morphological, Thermal and Mechanical Properties

In this study, a series of new epoxy/clay nanocomposites (ECN) has been prepared and characterized in order to investigate the properties and compare the effect of the unmodified Moroccan clay on the structure and properties of the composite materials. Five natural clays have been used to reinforce the neat epoxy resin with 1% wt and 5% wt achieving the clay dispersion only through strong milling and mechanical stirring without previous organic modifications of the clays. The quality of clay dispersion in the epoxy matrix and the morphology of nanocomposites have been studied by transmission electron microscopy (TEM), environmental scanning electron microscopy (ESEM), and X-ray diffraction (XRD). The mechanical and thermal properties have also been investigated. The antimicrobial activity of the nanocomposites has been tested against E. coli and S. aureus in order to evaluate their applicability as advanced antimicrobial materials. The results showed that the epoxy/crude clay nanocomposites exhibited a high inhibition action attending 99% against both bacteria in the case of the clay labeled A5

Synthesis and biological studies on dinuclear gold(I) complexes with Di-(N-Heterocyclic Carbene) ligands functionalized with carbohydrates

The design of novel metal complexes with N-heterocyclic carbene (NHC) ligands that display biological activity is an active research field in organometallic chemistry. One of the possible approaches consists of the use of NHC ligands functionalized with a carbohydrate moiety. Two novel Au(I)-Au(I) dinuclear complexes were synthesized; they present a neutral structure with one bridging diNHC ligand, having one or both heterocyclic rings decorated with a carbohydrate functionality. With the symmetric diNHC ligand, the dicationic dinuclear complex bearing two bridging diNHC ligands was also synthesized. The study was completed by analyzing the antiproliferative properties of these complexes, which were compared to the activity displayed by similar mononuclear Au(I) complexes and by the analogous bimetallic Au(I)-Au(I) complex not functionalized with carbohydrates

Pentafluorophenyl platinum(II) complexes of PTA and its N-allyl and N-benzyl derivatives: Synthesis, characterization and biological activity

From the well-known 1,3,5-triaza-phosphaadamantane (PTA, 1a), the novel N-allyl and N-benzyl tetrafuoroborate salts 1-allyl-1-azonia-3,5-diaza-7-phosphaadamantane (APTA(BF4), 1b) and 1-benzyl-1-azonia-3,5-diaza-7-phosphaadamantane (BzPTA(BF4), 1c) were obtained. These phosphines were then allowed to react with (Pt(\u3bc-Cl)(C6F5)(tht))2 (tht = tetrahydrothiophene) affording the water soluble Pt(II) complexes trans-(PtCl(C6F5)(PTA)2) (2a) and its bis-cationic congeners trans-(PtCl(C6F5)(APTA)2)(BF4)2 (2b) and trans-(PtCl(C6F5)(BzPTA)2)(BF4)2 (2c). The compounds were fully characterized by multinuclear NMR, ESI-MS, elemental analysis and (for 2a) also by single crystal X-ray diffraction, which proved the trans configuration of the phosphine ligands. Furthermore, in order to evaluate the cytotoxic activities of all complexes the normal human dermal fibroblast (NHDF) cell culture were used. The antineoplastic activity of the investigated compounds was checked against the human lung carcinoma (A549), epithelioid cervix carcinoma (HeLa) and breast adenocarcinoma (MCF-7) cell cultures. Interactions between the complexes and human serum albumin (HSA) using fluorescence spectroscopy and circular dichroism spectroscopy (CD) were also investigated

Total Cost of Ownership Driven Methodology for Predictive Maintenance Implementation in Industrial Plants

Part 4: Product and Asset Life Cycle Management in Smart Factories of Industry 4.0International audienceThis paper proposes a methodology to drive from a strategic point of view the implementation of a predictive maintenance policy within an industrial plant. The methodology integrates the evaluation of system performances, used to identify the critical components, with simulation and cost analysis. The goal is to evaluate predictive maintenance implementation scenarios based on alternative condition monitoring (CM) solutions, under the lenses of Total Cost of Ownership (TCO). This allows guiding the decision on where in the industrial system to install diagnostic solutions for monitoring of asset health, by keeping a systemic and life cycle-oriented perspective. Technical systemic performances are evaluated through Monte Carlo simulation based on the Reliability Block Diagram (RBD) model of the system. To validate the methodology, an application case study focused on a production line of a relevant Italian company in the food sector is presented

Artificial photosynthesis: photoanodes based on polyquinoid dyes onto mesoporous tin oxide surface

Dye-sensitized photoelectrochemical cells represent an appealing solution for artificial photosynthesis, aimed at the conversion of solar light into fuels or commodity chemicals. Extensive efforts have been directed towards the development of photoelectrodes combining semiconductor materials and organic dyes; the use of molecular components allows to tune the absorption and redox properties of the material. Recently, we have reported the use of a class of pentacyclic quinoid organic dyes (KuQuinone) chemisorbed onto semiconducting tin oxide as photoanodes for water oxidation. In this work, we investigate the effect of the SnO2 semiconductor thickness and morphology and of the dye-anchoring group on the photoelectrochemical performance of the electrodes. The optimized materials are mesoporous SnO2 layers with 2.5 mu m film thickness combined with a KuQuinone dye with a 3-carboxylpropyl-anchoring chain: these electrodes achieve light-harvesting efficiency of 93% at the maximum absorption wavelength of 533 nm, and photocurrent density J up to 350 mu A/cm(2) in the photoelectrochemical oxidation of ascorbate, although with a limited incident photon-to-current efficiency of 0.075%. Calculations based on the density functional theory (DFT) support the role of the reduced species of the KuQuinone dye via a proton-coupled electron transfer as the competent species involved in the electron transfer to the tin oxide semiconductor. Finally, a preliminary investigation of the photoelectrodes towards benzyl alcohol oxidation is presented, achieving photocurrent density up to 90 mu A/cm(2) in acetonitrile in the presence of N-hydroxysuccinimide and pyridine as redox mediator and base, respectively. These results support the possibility of using molecular-based materials in synthetic photoelectrochemistry.[GRAPHICS]