Evaluation and control of mechanical degradation of austenitic stainless 310S steel substrate during coated superconductor processing

The superconductor industry considers cold-rolled austenitic stainless 310S steel a less expensive substitute for Hastelloy X as a substrate for coated superconductor. However, the mechanical properties of cold-rolled 310S substrate degrade significantly in the superconductor deposition process. To overcome this, we applied hot rolling at 900 A degrees C (or 1000 A degrees C) to the 310S substrate. To check the property changes, a simulated annealing condition equivalent to that used in manufacturing was determined and applied. The effects of the hot rolling on the substrate were evaluated by analyzing its physical properties and texture.Web of Science24345444

A Case of Acute Polyneuropathy with Nephrotic Syndrome Showing Transient Proximal Sensory Conduction Defects

Acute sensorimotor polyneuropathy that resembles Guillain-Barré syndrome (GBS) is rarely accompanied with nephrotic syndrome, and its underlying immunological mechanisms are unclear. A 56-year-old man presented with simultaneous acute progressive symmetric sensorimotor polyneuropathy and proteinuria. A kidney biopsy revealed focal segmental glomerulosclerosis. Serial electrophysiologic studies showed only a transient proximal conduction block in the median nerve, stimulated somatosensory evoked potential and prolonged terminal latencies of the median and peroneal nerves. The patient's neurologic deficits and kidney dysfunction recovered with corticosteroid treatment. Our case showed that somatosensory evoked potential study can be an important objective tool in the diagnosis of acute polyneuropathy with normal distal nerve conduction and that corticosteroids should be considered in the initial treatment of GBS-resembling polyneuropathy associated with nephrotic syndrome

Tuning the electronic band structure of PCBM by electron irradiation

Tuning the electronic band structures such as band-edge position and bandgap of organic semiconductors is crucial to maximize the performance of organic photovoltaic devices. We present a simple yet effective electron irradiation approach to tune the band structure of [6, 6]-phenyl-C61-butyric acid methyl ester (PCBM) that is the most widely used organic acceptor material. We have found that the lowest unoccupied molecular orbital (LUMO) level of PCBM up-shifts toward the vacuum energy level, while the highest occupied molecular orbital (HOMO) level down-shifts when PCBM is electron-irradiated. The shift of the HOMO and the LUMO levels increases as the irradiated electron fluence increases. Accordingly, the band-edge position and the bandgap of PCBM can be controlled by adjusting the electron fluence. Characterization of electron-irradiated PCBM reveals that the variation of the band structure is attributed to the molecular structural change of PCBM by electron irradiation

High-Performance Heterostructured Cathodes for Lithium-Ion Batteries with a Ni-Rich Layered Oxide Core and a Li-Rich Layered Oxide Shell

The Ni-rich layered oxides with a Ni content of >0.5 are drawing much attention recently to increase the energy density of lithium-ion batteries. However, the Ni-rich layered oxides suffer from aggressive reaction of the cathode surface with the organic electrolyte at the higher operating voltages, resulting in consequent impedance rise and capacity fade. To overcome this difficulty, we present here a heterostructure composed of a Ni-rich LiNi0.7Co0.15Mn0.15O2 core and a Li-rich Li1.2-xNi0.2Mn0.6O2 shell, incorporating the advantageous features of the structural stability of the core and chemical stability of the shell. With a unique chemical treatment for the activation of the Li2MnO3 phase of the shell, a high capacity is realized with the Li-rich shell material. Aberration-corrected scanning transmission electron microscopy (STEM) provides direct evidence for the formation of surface Li-rich shell layer. As a result, the heterostructure exhibits a high capacity retention of 98% and a discharge- voltage retention of 97% during 100 cycles with a discharge capacity of 190 mA h g(-1) (at 2.0-4.5 V under C/3 rate, 1C = 200 mA g(-1)).ope

Evaluation of tensile properties using instrumented indentation technique for small scale testing

The Instrumented indentation technique (IIT) is a useful tool for estimating various mechanical properties such as tensile properties, fracture toughness, and residual stress by analyzing the load and depth curve. Unlike conventional test such as tensile test, CTOD, since IIT makes an indent with rigid indenter and measures load and depth continuously, it requires only a localized area and small area on the target material. IIT also has merits of simple specimen preparation and experimental procedure in terms of time and cost. Also, it can be applied to in-field structures nondestructively. In this study, we introduce a method for evaluating tensile properties, primary yield strength and tensile strength using representative stress-strain beneath the rigid spherical indenter through numerous investigations of instrumented indentation curves. Analytic models and procedures for estimating the mechanical characterization of materials using IIT are proposed. The representative stress-strain method directly correlates indentation stress and strain beneath indenter to true stress and strain of the tensile test by taking into account the plastic constraint effect. The experimental results from IIT were verified by comparing results from the uniaxial tensile test. In particular, the applications of IIT in small scale and localized area of materials are presented. Reference 1) D. Tabor: Hardness of metal, (first ed. Clarendon Press, New York, 1951) 2) W.C. Oliver and G.M. Pharr, J. Mater, Res, Vol. 7, (1992), p. 1564 3) S.-K. Kang, Y.-C. Kim, K.-H. Kim, J.-Y. Kim and D. Kwon, Int. J. Plast. 49, 1 (2013

Short Term Effect and Safety of Antidiuretic Hormone in the Patients with Nocturia

Purpose To investigate the short-term safety of antidiuretic hormone in elderly patients with nocturnal polyuria, focus on hyponatremia and others electrolytes disturbances and to assess short-term effects on nocturnal urine output and number of nocturnal voids. Methods Between June 2005 and August 2006, a total of 34 patients with nocturnal polyuria were orally administered 0.2 mg desmopressin tablet at bedtime for two weeks. Serum sodium, others electrolytes, urine sodium and urine osmolarity were assessed in the third days, one week and two weeks after treatment with desmopressin and compared adult group (<65 years of age) with elderly group (≥65 years of age). We assessed the effect of desmopressin using a frequency-volume charts and analysed. Results In total 34 patients (20 adult, 14 elderly) were analyzed. Desmopressin treatment did not significantly change serum and urine electrolytes include soduim concentration in elderly patients comparied with adult patients. Serum sodium concentration below normal range was recorded in 2 patients in elderly group, but no serious adverse events occurred and recovered without sequelae. The mean number of nocturnal voids decresed (54% reduction) and nocturnal urine output decreased (57% reduction) after using desmopressin. Conclusions Desmopressin was well tolerated and effective in elderly patients with nocturnal polyuria without clinically significant hyponatremia

Analysis of Building Energy Savings Potential for Metal Panel Curtain Wall Building by Reducing Thermal Bridges at Joints Between Panels

AbstractTo achieve national greenhouse gas reduction in the building sector, heating and cooling energy in buildings should be reduced. The government has strengthened regulations on insulation performance for building energy savings. However, the building envelope has various thermal bridges. In particular, a metal panel curtain wall comprises a number of thermal bridges at joints between the panels and the fixing units, thus degrading the overall thermal performance. To reduce building energy, it is necessary to reduce thermal bridges in building envelopes. This study aims to analyze the energy saving potential achieved by reducing thermal bridges. For this, the insulation performance and building energy needs of the existing and alternative metal panel curtain wall were evaluated. The alternative metal panel curtain wall that uses plastic molds at joints between panels and the thermally-broken brackets was suggested to reduce heat loss through thermal bridges. As results, the effective U-value of the alternative metal panel curtain wall was reduced by 72% compared with the existing metal panel curtain wall. In addition, annual heating energy needs of the alternative metal panel curtain wall building was reduced by 26%, and annual total energy needs was reduced by 6% because annual cooling energy needs of it slightly increased compared with the existing metal panel curtain wall. In conclusion, the alternative metal panel curtain wall considerably influenced the savings in building energy needs by reducing thermal bridges