Introduction on atomic layer deposition for high-k dielectric & high mobility oxide semiconductor thin film transistors

Amorphous oxide semiconductors have been widely studied for the potential use in flat panel displays such as active matrix liquid crystal display (LCD) and Organic light emitting diodes (OLEDs). Since reporting amorphous InGaZnO semiconductor thin film transistor (TFT) in 2003 & 2004, many multi-component oxide semiconductors have been intensively investigated and developed by reactive sputtering method. Very recently, the sputtered InGaZnO TFTs are already adopted in mass-production to fabricate AMOLED TVs. However, there remain several problems such as high mobility & stability issues. Also, virtual and argument reality (VR, AR) applications are rapidly emerging in display markets but the main issues are high resolution and low-voltage driving technologies. Please click Additional Files below to see the full abstract

Enhancement of phase separation in the InGaN layer for self-assembled In-rich quantum dots

The enhancement of phase separation in the InGaN layer grown on a GaN layer with a rough surface was investigated for the formation of self-assembled In-rich quantum dots(QDs) in the InGaN layer. Transmission electron microscopy images showed that In-rich QDs with a size of 2–5 nm were formed even in an InGaN layer with a low indium content, and a layer thickness less than the critical thickness. The room-temperature photoluminescence(PL) spectrum of this layer showed emission peaks corresponding to In-rich QDs. The temperature-dependent PL spectra showed dominant peak shifts to the lower energy side, indicating that the self-assembled In-rich QDs are formed in the InGaN layer grown on a rough GaNsurface and that the carriers are localized in In-rich QDs

The effect of beta1-adrenergic receptor gene polymorphism on prolongation of corrected QT interval during endotracheal intubation under sevoflurane anesthesia

BACKGROUND: The hemodynamic responses to endotracheal intubation are associated with sympathoadrenal activity. Polymorphisms in the beta1-adrenergic receptor (β(1)AR) gene can alter the pathophysiology of specific diseases. The aim of this study is to investigate whether the Ser49Gly and Arg389Gly polymorphism of the β(1)AR gene have different cardiovascular responses during endotracheal intubation under sevoflurane anesthesia. METHODS: Ninety-one healthy patients undergoing general anesthesia were enrolled. Patients underwent slow inhalation induction of anesthesia using sevoflurane in 100% oxygen. Vecuronium 0.15 mg/kg was given for muscle relaxation. Endotracheal intubation was performed by an anesthesiologist. The mean arterial pressure (MAP), heart rate (HR), and the corrected QT (QTc) interval were measured before induction, before laryngoscopy, and immediately after tracheal intubation. Genomic DNA was isolated from the patients' peripheral blood and then evaluated for the β(1)AR-49 and β(1)AR-389 genes using an allele-specific polymerase chain reaction method. RESULTS: No differences were found in the baseline values of MAP, HR, and the QTc interval among β(1)AR-49 and β(1)AR-389, respectively. In the case of β(1)AR-49, the QTc interval change immediately after tracheal intubation was significantly greater in Ser/Ser genotypes than in Ser/Gly genotypes. No differences were observed immediately after tracheal intubation in MAP and HR for β(1)AR-49 and β(1)AR-389. CONCLUSIONS: We found an association between the Ser49 homozygote gene of β(1)AR-49 polymorphism and increased QTc prolongation during endotracheal intubation with sevoflurane anesthesia. Thus, β(1)AR-49 polymorphism may be useful in predicting the risk of arrhythmia during endotracheal intubation in patients with long QT syndrome.ope

Increasing the Durability of Piezoelectric Impact-based Micro Wind Generator in Real Application

AbstractThe purpose of this study is to increase the durability of piezoelectric impact-based micro wind generator (PIMWG) in real application. Using new PIMWG design, numerical simulation, and experimental comparison analysis, we improved the durability of PIMWGs in real application. The experimental results show that the optimized PIMWG generated 2.4 mW (RMS value), and it did not crack within 40h. In this study, we improved the durability of PIMWGs for real application

Structural safety inspection of reinforced concrete structures considering failure probabilities of structural members

Regular safety inspections of existing reinforced concrete (RC) structures are required according to the regulations and criteria set by each country. In South Korea, the safety inspection regulations provided by the Korea Infrastructure Safety and Technology Corporation (KISTEC) are followed. These regulations were developed based on fuzzy theory to avoid subjective decisions, and provide standardized deterioration grades for member types, floors, and the entire structure. However, the safety inspection regulation by the KISTEC often provides unconservative evaluation results. In particular, as the importance factors of beam and slab members are set lower than those of other members, there are cases in which deteriorations occurring in beams and slabs are not properly reflected in the floor level evaluation. In this study, to overcome such limitations, case studies were carried out and modified importance factors for structural member types were proposed considering the failure probabilities of each member type based on the reliability theory. The importance modification factor was calculated based on the strength ratio of structural members so that the more dangerous the members are, the more impact they give on the evaluation. Overall, compared to the KISTEC method, the proposed method provided conservative but practical assessment results, and it was found that the proposed importance factors can be very useful to properly reflect the effects of damaged members on the deterioration status evaluation of the floors and the entire structure

Asymptomatic stenosis in the cervical and thoracic spines of patients with symptomatic lumbar stenosis

Study Design Retrospective study. Objective Studies on age-related degenerative changes causing concurrent stenoses in the cervical, thoracic, and lumbar spines (triple stenosis) are rare in the literature. Our objectives were to determine: (1) the incidence of asymptomatic radiologic cervical and thoracic stenosis in elderly patients with symptomatic lumbar stenosis, (2) the incidence of concurrent radiologic spinal stenosis in the cervical and thoracic spines, and (3) the radiologic features of cervical stenosis that might predict concurrent thoracic stenosis. Methods Whole-spine T2 sagittal magnetic resonance images of patients older than 80 and diagnosed with lumbar spinal stenosis between January 2003 and January 2012 were evaluated retrospectively. We included patients with asymptomatic spondylotic cervical and thoracic stenosis. We measured the anteroposterior diameters of the vertebral body, bony spinal canal, and spinal cord, along with the Pavlov ratio and anterior or posterior epidural stenosis at the level of the disk for each cervical and thoracic level. We compared the radiologic parameters between the subgroups of cervical stenosis with and without thoracic stenosis. Results Among the 460 patients with lumbar stenosis, 110 (23.9%) had concurrent radiologic cervical stenosis and 112 (24.3%) had concurrent radiologic thoracic stenosis. Fifty-six patients (12.1%) had combined radiologic cervical and thoracic stenosis in addition to their symptomatic lumbar stenosis (triple stenosis). Anterior epidural stenosis at C7–T1 was associated with a high prevalence of thoracic stenosis. Conclusions It appears that asymptomatic radiologic cervical and thoracic stenosis is common in elderly patients with symptomatic lumbar stenosis

Sequences of the Cytochrome C Oxidase Subunit I (COI) Gene are Suitable for Species Identification of Korean Calliphorinae Flies of Forensic Importance (Diptera: Calliphoridae)

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/75068/1/j.1556-4029.2009.01126.x.pd