830 research outputs found
The effect of various design codes and dynamic magnification on buildings with torsional irregularity
Seismic provisions have utilized design eccentricities to reduce planar irregularities in lateral stiffness of buildings. In calculating a design eccentricity, the torsional amplification factor may be applied either to accidental eccentricity or to both inherent and accidental eccentricities according to design codes. In this paper, different code provisions and their impact on torsional responses of buildings are investigated using example buildings with various aspect ratios and inherent eccentricities. It was found that the design eccentricity in KBC-2009 using torsional amplification factor for only accidental eccentricity reflects the dynamic magnification more accurately than that in KBC-2006 using this factor for both inherent and accidental eccentricity. And dynamic magnification of a torsionally imbalanced building is affected by the size of seismic design force of response spectrum analysis than design eccentricity of equivalent static analysis in KBC-2009. In other words, design eccentricity including torsional amplification factor in KBC-2009 do not reflect the dynamic magnification accurately
Silicon germanium photo-blocking layers for a-IGZO based industrial display
Amorphous indium- gallium-zinc oxide (a-IGZO) has been intensively studied for the application to active matrix flat-panel display because of its superior electrical and optical properties. However, the characteristics of a-IGZO were found to be very sensitive to external circumstance such as light illumination, which dramatically degrades the device performance and stability practically required for display applications. Here, we suggest the use for silicon-germanium (Si-Ge) films grown plasmaenhanced chemical vapour deposition (PECVD) as photo-blocking layers in the a-IGZO thin film transistors (TFTs). The charge mobility and threshold voltage (V-th) of the TFTs depend on the thickness of the Si-Ge films and dielectric buffer layers (SiNX), which were carefully optimized to be similar to 200 nm and similar to 300 nm, respectively. As a result, even after 1,000 s illumination time, the V-th and electron mobility of the TFTs remain unchanged, which was enabled by the photo-blocking effect of the Si-Ge layers for a-IGZO films. Considering the simple fabrication process by PECVD with outstanding scalability, we expect that this method can be widely applied to TFT devices that are sensitive to light illumination.
Effects of Particle Size and Cement Replacement of LCD Glass Powder in Concrete
The high quality liquid crystal display (LCD) processing waste glass (LPWG) generated from the manufacturing process of Koreaâs LCD industries, having the worldâs highest technological level and production, was finely ground into particles smaller than cement particles (higher fineness than OPC) to verify their applicability and performance as a replacement for cement. For a concrete mix having a W/B ratio of 0.44, cement was replaced with LPWG glass powder (LGP) at ratios of 5, 10, 15, and 20% (LGP12) and 5 and 10% (LGP5) according to the particle size to prepare test cylinder specimens, which were tested with respect to air contents, slump in fresh concrete, and compressive strength and splitting tensile strength of hardened concrete. The microstructure of the concrete specimens was analyzed through Scanning Electron Microscopy (SEM), Energy Dispersive X-ray (EDX), and a Mercury Intrusion Porosimetry (MIP). Replacement of cement with LGP for cement could effectively decrease the quantity of cement used due to the excellent performance of LGP. It may positively contribute to the sustainable development of the cement industry as well as waste recycling and environment conservation on a national scale
Structural safety inspection of reinforced concrete structures considering failure probabilities of structural members
Regular safety inspections of existing reinforced concrete (RC) structures are required according to the regulations and criteria set by each country. In South Korea, the safety inspection regulations provided by the Korea Infrastructure Safety and Technology Corporation (KISTEC) are followed. These regulations were developed based on fuzzy theory to avoid subjective decisions, and provide standardized deterioration grades for member types, floors, and the entire structure. However, the safety inspection regulation by the KISTEC often provides unconservative evaluation results. In particular, as the importance factors of beam and slab members are set lower than those of other members, there are cases in which deteriorations occurring in beams and slabs are not properly reflected in the floor level evaluation. In this study, to overcome such limitations, case studies were carried out and modified importance factors for structural member types were proposed considering the failure probabilities of each member type based on the reliability theory. The importance modification factor was calculated based on the strength ratio of structural members so that the more dangerous the members are, the more impact they give on the evaluation. Overall, compared to the KISTEC method, the proposed method provided conservative but practical assessment results, and it was found that the proposed importance factors can be very useful to properly reflect the effects of damaged members on the deterioration status evaluation of the floors and the entire structure
Intrinsically Stretchable Three Primary Light-Emitting Films Enabled By Elastomer Blend For Polymer Light-Emitting Diodes
Intrinsically stretchable light-emitting materials are crucial for skin-like wearable displays; however, their color range has been limited to green-like yellow lights owing to the restricted stretchable light-emitting materials (super yellow series materials). To develop skin-like full-color displays, three intrinsically stretchable primary light-emitting materials [red, green, and blue (RGB)] are essential. In this study, we report three highly stretchable primary light-emitting films made from a polymer blend of conventional RGB light-emitting polymers and a nonpolar elastomer. The blend films consist of multidimensional nanodomains of light-emitting polymers that are interconnected in an elastomer matrix for efficient light-emitting under strain. The RGB blend films exhibited over 1000 cd/m2 luminance with low turn-on voltage (Von) and the selectively stretched blend films on rigid substrate maintained stable light-emitting performance up to 100% strain even after 1000 multiple stretching cycles
The Effects of Changing from Isoflurane to Desflurane on the Recovery Profile during the Latter Part of Anesthesia
It is not known whether changing from isoflurane to desflurane during the latter part of anesthesia shows early emergence and recovery in long surgery. We therefore evaluated the effects of changing isoflurane to desflurane on emergence and recovery. Eighty-two patients were randomly assigned to receive isoflurane (Group I) or desflurane (Group D) or to change from isoflurane to desflurane anesthesia (Group X). At the point when there was an hour until the operation would end, isoflurane was replaced with 1 MAC of desflurane in Group X, and isoflurane and desflurane were maintained at 1 MAC in Groups I and D. When the operation ended, we compared the emergence and recovery characteristics among the 3 groups. Compared with Group I, Group X showed faster emergence and recovery. Group X and Group D showed similar emergence and recovery. In conclusion, changing isoflurane to desflurane during the latter part of anesthesia improves emergence and recovery
GAP-43 closely interacts with BDNF in hippocampal neurons and is associated with Alzheimer's disease progression
IntroductionGrowth-associated protein 43 (GAP-43) is known as a neuronal plasticity protein because it is widely expressed at high levels in neuronal growth cones during axonal regeneration. GAP-43 expressed in mature adult neurons is functionally important for the neuronal communication of synapses in learning and memory. Brain-derived neurotrophic factor (BDNF) is closely related to neurodegeneration and synaptic plasticity during the aging process. However, the molecular mechanisms regulating neurodegeneration and synaptic plasticity underlying the pathogenesis and progression of Alzheimer's disease (AD) still remain incompletely understood.MethodsRemarkably, the expressions of GAP-43 and BDNF perfectly match in various neurons in the Human Brain Atlas database. Moreover, GAP-43 and BDNF are highly expressed in a healthy adults' hippocampus brain region and are inversely correlated with the amyloid beta (AÎČ), which is the pathological peptide of amyloid plaques found in the brains of patients with AD.ResultsThese data led us to investigate the impact of the direct molecular interaction between GAP-43 and BDNF in hippocampal neuron fate. In this study, we show that GAP-43 and BDNF are inversely associated with pathological molecules for AD (Tau and AÎČ). In addition, we define the three-dimensional protein structure for GAP-43 and BDNF, including the predictive direct binding sites via analysis using ClusPro 2.0, and demonstrate that the deprivation of GAP-43 and BDNF triggers hippocampal neuronal death and memory dysfunction, employing the GAP-43 or BDNF knock-down cellular models and 5XFAD mice.ConclusionThese results show that GAP-43 and BDNF are direct binding partners in hippocampal neurons and that their molecular signaling might be potential therapeutic targets for AD
Suppression of lung cancer progression by biocompatible glycerol triacrylateâspermine-mediated delivery of shAkt1
Background: Polyethylenimine (PEI)-based nonviral gene-delivery systems are commonly employed because of their high transfection efficiency. However, the toxic nature of PEI is a significant obstacle in clinical gene therapy. In this study, we developed biocompatible glycerol triacrylate-spermine (GT-SPE) polyspermine as a nanosized gene carrier for potential lung cancer gene therapy. Methods: The GT-SPE was synthesized using the Michael addition reaction between GT and SPE. The molecular weight was characterized using gel permeability chromatography multiangle laser light scattering and the composition of the polymer was analyzed using proton nuclear magnetic resonance. Results: The GT-SPE successfully protected the DNA from nucleases. The average particle size of the GT-SPE was 121 nm with a zeta potential of +23.45 mV. The GT-SPE was found to be less toxic than PEI for various cell lines, as well as for a murine model. Finally, our results showed that the GT-SPE/small hairpin Akt1 (shAkt1) complex suppressed lung tumorigenesis in a K-ras(LA1) lung cancer mice model by inducing apoptosis through the Akt signaling pathway and cell cycle arrest. Aerosol delivered GT-SPE/shAkt1, which reduced matrix metalloproteinase-9 activity and suppressed the expression levels of proliferating cell nuclear antigen, as well as vascular endothelial growth factors and CD31, which are known proliferation and angiogenesis markers, respectively. Conclusion: Our data suggest that GT-SPE may be a candidate for short hairpin-shaped RNA-based aerosol lung cancer gene therapy
Cause of Chest Pain in a Patient with Previous Myocardial Infarction: Look Outside the Heart for Extracardiac Mass
We report a case of thymic carcinoma that was initially detected by echocardiography in an 80-year-old male who visited the emergency room for chest pain and had a history of myocardial infarction and percutaneous coronary intervention. Transthoracic echocardiography showed a huge extracardiac mass that was located in the anterior mediastinum and was diagnosed as a thymic carcinoma by biopsy
- âŠ