956 research outputs found
Recommended from our members
Flux-flow resistivity of three high-temperature superconductors
Results of experiments on flux-flow resistivity (the relationship of voltage to current) of three high-temperature superconductors are described. The superconductors are a melt-cast BSCCO 2212 rod, a single filament BSCCO powder-in-tube (PIT) tape, and a multifilament PIT tape. The flux-flow resistivity of these superconductors was measured at three temperatures: 77 K (saturated liquid nitrogen), 87 K (saturated liquid argon), and 67 K (subcooled liquid nitrogen). Implications of the present results for practical applications are discussed
Recommended from our members
Prediction of burnout of a conduction-cooled BSCCO current lead
A one-dimensional heat conduction model is employed to predict burnout of a Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub 8} current lead. The upper end of the lead is assumed to be at 77 K and the lower end is at 4 K. The results show that burnout always occurs at the warmer end of the lead. The lead reaches its burnout temperature in two distinct stage. Initially, the temperature rises slowly when part of the lead is in flux-flow state. As the local temperature reaches the critical temperature, it begins to increase sharply. Burnout time depends strongly on flux-flow resistivity
Co-production of hydrogen and ethanol from glucose in Escherichia coli by activation of pentose-phosphate pathway through deletion of phosphoglucose isomerase (pgi) and overexpression of glucose-6-phosphate dehydrogenase (zwf) and 6-phosphogluconate dehydrogenase (gnd)
Background: Biologically, hydrogen (H-2) can be produced through dark fermentation and photofermentation. Dark fermentation is fast in rate and simple in reactor design, but H-2 production yield is unsatisfactorily low as < 4 mol H-2/ mol glucose. To address this challenge, simultaneous production of H-2 and ethanol has been suggested. Co-production of ethanol andH(2) requires enhanced formation of NAD(P) H during catabolism of glucose, which can be accomplished by diversion of glycolytic flux from the Embden-Meyerh-of-Parnas (EMP) pathway to the pentose-phosphate (PP) pathway in Escherichia coli. However, the disruption of pgi (phosphoglucose isomerase) for complete diversion of carbon flux to the PP pathway made E. coli unable to grow on glucose under anaerobic condition. Results: Here, we demonstrate that, when glucose-6-phosphate dehydrogenase (Zwf) and 6-phosphogluconate dehydrogenase (Gnd), two major enzymes of the PP pathway, are homologously overexpressed, E. coli.pgi can recover its anaerobic growth capability on glucose. Further, with additional deletions of Delta hycA,Delta hyaAB,Delta hybBC,Delta ldhA, and Delta frdAB, the recombinant.pgi mutant could produce 1.69 mol H-2 and 1.50 mol ethanol from 1 mol glucose. However, acetate was produced at 0.18 mol mol(-1) glucose, indicating that some carbon is metabolized through the Entner-Doudoroff (ED) pathway. To further improve the flux via the PP pathway, heterologous zwf and gnd from Leuconostoc mesenteroides and Gluconobacter oxydans, respectively, which are less inhibited by NADPH, were overexpressed. The new recombinant produced more ethanol at 1.62 mol mol(-1) glucose along with 1.74 mol H-2 mol(-1) glucose, which are close to the theoretically maximal yields, 1.67 mol mol(-1) each for ethanol andH(2). However, the attempt to delete the ED pathway in the.pgi mutant to operate the PP pathway as the sole glycolytic route, was unsuccessful. Conclusions: By deletion of pgi and overexpression of heterologous zwf and gnd in E. coli Delta hycA Delta hyaAB Delta hybBC Delta ldhA Delta frdAB, two important biofuels, ethanol andH(2), could be successfully co-produced at high yields close to their theoretical maximums. The strains developed in this study should be applicable for the production of other biofuels and biochemicals, which requires supply of excessive reducing power under anaerobic conditions
Theory of biopolymer stretching at high forces
We provide a unified theory for the high force elasticity of biopolymers
solely in terms of the persistence length, , and the monomer spacing,
. When the force f>\fh \sim k_BT\xi_p/a^2 the biopolymers behave as Freely
Jointed Chains (FJCs) while in the range \fl \sim k_BT/\xi_p < f < \fh the
Worm-like Chain (WLC) is a better model. We show that can be estimated
from the force extension curve (FEC) at the extension
(normalized by the contour length of the biopolymer). After validating the
theory using simulations, we provide a quantitative analysis of the FECs for a
diverse set of biopolymers (dsDNA, ssRNA, ssDNA, polysaccharides, and
unstructured PEVK domain of titin) for . The success of a specific
polymer model (FJC or WLC) to describe the FEC of a given biopolymer is
naturally explained by the theory. Only by probing the response of biopolymers
over a wide range of forces can the -dependent elasticity be fully
described.Comment: 20 pages, 4 figure
New insights into electron spin dynamics in the presence of correlated noise
The changes of the spin depolarization length in zinc-blende semiconductors
when an external component of correlated noise is added to a static driving
electric field are analyzed for different values of field strength, noise
amplitude and correlation time. Electron dynamics is simulated by a Monte Carlo
procedure which keeps into account all the possible scattering phenomena of the
hot electrons in the medium and includes the evolution of spin polarization.
Spin depolarization is studied by examinating the decay of the initial spin
polarization of the conduction electrons through the D'yakonov-Perel process,
the only relevant relaxation mechanism in III-V crystals. Our results show
that, for electric field amplitude lower than the Gunn field, the dephasing
length shortens with the increasing of the noise intensity. Moreover, a
nonmonotonic behavior of spin depolarization length with the noise correlation
time is found, characterized by a maximum variation for values of noise
correlation time comparable with the dephasing time. Instead, in high field
conditions, we find that, critically depending on the noise correlation time,
external fluctuations can positively affect the relaxation length. The
influence of the inclusion of the electron-electron scattering mechanism is
also shown and discussed.Comment: Published on "Journal of Physics: Condensed Matter" as "Fast Track
Communications", 11 pages, 9 figure
Screening of suitable cationic dopants for solar absorber material CZTS/Se: A first principles study
The earth abundant and non-toxic solar absorber material kesterite Cu2ZnSn(S/Se)(4) has been studied to achieve high power conversion efficiency beyond various limitations, such as secondary phases, antisite defects, band gap adjustment and microstructure. To alleviate these hurdles, we employed screening based approach to find suitable cationic dopant that can promote the current density and the theoretical maximum upper limit of the energy conversion efficiency (P(%)) of CZTS/Se solar devices. For this task, the hybrid functional (Heyd, Scuseria and Ernzerhof, HSE06) were used to study the electronic and optical properties of cation (Al, Sb, Ga, Ba) doped CZTS/Se. Our in-depth investigation reveals that the Sb atom is suitable dopant of CZTS/CZTSe and also it has comparable bulk modulus as of pure material. The optical absorption coefficient of Sb doped CZTS/Se is considerably larger than the pure materials because of easy formation of visible range exciton due to the presence of defect state below the Fermi level, which leads to an increase in the current density and P(%). Our results demonstrate that the lower formation energy, preferable energy gap and excellent optical absorption of the Sb doped CZTS/Se make it potential component for relatively high efficient solar cells
Effects of stocking density on growth performance, carcass grade and immunity of pigs housed in sawdust fermentative pigsties
Abstract This study determined the effect of space allowance on performance, carcass grade and physiological variables of pigs reared in sawdust fermentative pigsties. A total of 699 crossbred (Landrace × Yorkshire × Duroc) pigs were housed in sawdust fermentative pigsties and assigned to one of three treatments at different growth stages, namely early grower pigs (EGP), weighing 15 -40 kg; late grower pig
Study of Thermal Properties of Graphene-Based Structures Using the Force Constant Method
The thermal properties of graphene-based materials are theoretically
investigated. The fourth-nearest neighbor force constant method for phonon
properties is used in conjunction with both the Landauer ballistic and the
non-equilibrium Green's function techniques for transport. Ballistic phonon
transport is investigated for different structures including graphene, graphene
antidot lattices, and graphene nanoribbons. We demonstrate that this particular
methodology is suitable for robust and efficient investigation of phonon
transport in graphene-based devices. This methodology is especially useful for
investigations of thermoelectric and heat transport applications.Comment: 23 pages, 9 figures, 1 tabl
Negative Thermal Expansion Coefficient of Graphene Measured by Raman Spectroscopy
The thermal expansion coefficient (TEC) of single-layer graphene is estimated
with temperature-dependent Raman spectroscopy in the temperature range between
200 and 400 K. It is found to be strongly dependent on temperature but remains
negative in the whole temperature range, with a room temperature value of
-8.0x10^{-6} K^{-1}. The strain caused by the TEC mismatch between graphene and
the substrate plays a crucial role in determining the physical properties of
graphene, and hence its effect must be accounted for in the interpretation of
experimental data taken at cryogenic or elevated temperatures.Comment: 17 pagese, 3 figures, and supporting information (4 pages, 3
figures); Nano Letters, 201
- …