4,087 research outputs found
Gasification of Municipal Solid Waste
Gasification of municipal solid waste (MSW) is an attractive alternative fuel production process for the treatment of solid waste as it has several potential benefits over traditional combustion of MSW.Ā Syngas produced from the gasification of MSW can be utilized as a gas fuel being combusted in a conventional burner or in a gas engine to utilize the heat or produce electricity. Also, it can be used as a building block for producing valuable products such as chemicals and other forms of fuel energy. This book chapter covers the properties of MSW, gasification mechanism, chemistry, operating conditions, gasification technologies, processes, recovery system, and most importantly by reviewing the environmental impacts of MSW gasification. As one of recent advanced technologies, a case study of pilot-scale MSW gasification is introduced, which could be one of the most efficient pathways to utilize the technology to produce electricity with a newly developed gasification process by reducing tar and pollutant emission
Crystallization Characteristics of CaO-Al2O3-Based Mold Flux and Their Effects on In-Mold Performance during High-Aluminum TRIP Steels Continuous Casting
Crystallization behaviors of the newly developed lime-alumina-based mold fluxes for high-aluminum transformation induced plasticity (TRIP) steels casting were experimentally studied, and compared with those of lime-silica-based mold fluxes. The effects of mold flux crystallization characteristics on heat transfer and lubrication performance in casting high-Al TRIP steels were also evaluated. The results show that the crystallization temperatures of lime-alumina-based mold fluxes are much lower than those of lime-silica-based mold fluxes. Increasing B2O3 addition suppresses the crystallization of lime-alumina-based mold fluxes, while Na2O exhibits an opposite effect. In continuous cooling of lime-alumina-based mold fluxes with high B2O3 contents and a CaO/Al2O3 ratio of 3.3, faceted cuspidine precipitates first, followed by needle-like CaO center dot B2O3 or 9CaO center dot 3B(2)O(3)center dot CaF2. In lime-alumina-based mold flux with low B2O3 content (5.4 mass pct) and a CaO/Al2O3 ratio of 1.2, the formation of fine CaF2 takes place first, followed by blocky interconnected CaO center dot 2Al(2)O(3) as the dominant crystalline phase, and rod-like 2CaO center dot B2O3 precipitates at lower temperature during continuous cooling of the mold flux. In B2O3-free mold flux, blocky interconnected 3CaO center dot Al2O3 precipitates after CaF2 and 3CaO center dot 2SiO(2) formation, and takes up almost the whole crystalline fraction. The casting trials show that the mold heat transfer rate significantly decreases near the meniscus during the continuous casting using lime-alumina-mold fluxes with higher crystallinity, which brings a great reduction of surface depressions on cast slabs. However, excessive crystallinity of mold flux causes poor lubrication between mold and solidifying steel shell, which induces various defects such as drag marks on cast slab. Among the studied mold fluxes, lime-alumina-based mold fluxes with higher B2O3 contents and a CaO/Al2O3 ratio of 3.3 show comparatively improved performance.open113133sciescopu
Crystallization Kinetics and Mechanism of CaO-Al2O3-Based Mold Flux for Casting High-Aluminum TRIP Steels
Non-isothermal crystallization of the newly developed lime-alumina-based mold fluxes was investigated using differential scanning calorimetry. The crystallization kinetic parameters were determined by Ozawa equation, the combined Avrami-Ozawa equation, and the differential iso-conversional method of Friedman. It was found that Ozawa method failed to describe the non-isothermal crystallization behavior of the mold fluxes. The Avrami exponent determined by the combined Avrami-Ozawa equation indicates that the crystallization of cuspidine occurs through bulk nucleation and reaction-controlled three-dimensional growth, and then transforms to reaction-controlled two-dimensional growth at the crystallization later stage in lime-alumina-based mold fluxes with higher B2O3 content. For the mold fluxes with lower B2O3 content (10.8 mass pct), the crystallization of cuspidine is bulk nucleation and reaction-controlled two-dimensional growth at the crystallization primary stage followed by a diffusion-controlled two-dimensional growth process. The crystallization of CaF2 in mold flux originates from bulk nucleation and diffusion-controlled three-dimensional growth, which then transforms to two-dimensional growth. FE-SEM observations support these kinetic analysis results. The effective activation energy for cuspidine crystallization in the mold flux with higher B2O3 and Na2O contents increases as the crystallization progresses, and then decreases at the relative degree of crystallinity greater than 60 pct. The transition point of this trend approximately corresponds to the relative degree of crystallinity at which the crystallization mode of cuspidine transforms. For the mold fluxes with lower B2O3 and Na2O contents, the effective activation energy for cuspidine formation varies monotonically with the increase in the relative degree of crystallinity.open11149sciescopu
Evaluation of Matusita Equation and Its Modified Expression for Determining Activation Energy Associated with Melt Crystallization
Both the Matusita equation and the modified Matusita equation for estimating the activation energy associated with non-isothermal crystallization were critically evaluated. The derivation for melts crystallization on cooling indicates that, unlike for the crystallization that occurs on heating, the term 1 - exp (-Delta G/RT) in the basic rate equation of crystal growth and the term depending on the initial temperature of the cooling process cannot be neglected. It is demonstrated that both the Matusita equation and its modified expression are only valid to estimate the activation energy associated with the crystallization that occurs on heating, but are inapplicable for the melt crystallization that occurs on cooling. It is suggested that the isoconversional methods of Friedman and Vyazovkin should be alternative to determine effective activation energy for melt crystallization that occurs on cooling.open1133sciescopu
Where Are E-governments in South Asian Countries? A Comparative Approach
The four countries are selected and compared based on their use of e-government as a tool to work and share information more effectively while delivering better services to the public. It also provides a general understanding of e-government and uses different variables to discuss the reality of e-government development and e-participation over the last few years in these four countries. In view of this, the time series data are collected from the United Nations e-government survey to highlight developing trends in e-government along with issues and challenges, best practices, and opportunities for the development of egovernment. As a result, this study finds that real e-government remains a distant hope in these countries due to the expense of supplying technology, a lack of infrastructure, limited human capital and a weak private sector. 
Protection by the NDI1 Gene against Neurodegeneration in a Rotenone Rat Model of Parkinson's Disease
It is widely recognized that mitochondrial dysfunction, most notably defects in the NADH-quinone oxidoreductase (complex I), is closely related to the etiology of sporadic Parkinson's disease (PD). In fact, rotenone, a complex I inhibitor, has been used for establishing PD models both in vitro and in vivo. A rat model with chronic rotenone exposure seems to reproduce pathophysiological conditions of PD more closely than acute mouse models as manifested by neuronal cell death in the substantia nigra and Lewy body-like cytosolic aggregations. Using the rotenone rat model, we investigated the protective effects of alternative NADH dehydrogenase (Ndi1) which we previously demonstrated to act as a replacement for complex I both in vitro and in vivo. A single, unilateral injection of recombinant adeno-associated virus carrying the NDI1 gene into the vicinity of the substantia nigra resulted in expression of the Ndi1 protein in the entire substantia nigra of that side. It was clear that the introduction of the Ndi1 protein in the substantia nigra rendered resistance to the deleterious effects caused by rotenone exposure as assessed by the levels of tyrosine hydroxylase and dopamine. The presence of the Ndi1 protein also prevented cell death and oxidative damage to DNA in dopaminergic neurons observed in rotenone-treated rats. Unilateral protection also led to uni-directional rotation of the rotenone-exposed rats in the behavioral test. The present study shows, for the first time, the powerful neuroprotective effect offered by the Ndi1 enzyme in a rotenone rat model of PD
Efekti koriÅ”Äenja astaksantina u ishrani na rast, pigmentaciju miÅ”iÄa i antioksidantne aktivnosti mlaÄi kalifornijske pastrmke (oncorhynchus mykiss)
This study was designed to test the effects of dietary astaxanthin on growth, muscle pigmentation, antioxidant activity and biochemical composition of juvenile rainbow trout (Oncorhynchus mykiss). Experimental diets were formulated to contain 50, 75 and 100 ppm astaxanthin (designed as AS50, AS75 and AS100). The diet without supplementation of astaxanthin was considered as the control diet. Each experimental diet was fed to three replicate groups of fish (18.5 g/fish) to visual satiation two times a day for 10 weeks. Growth performance and proximate composition of muscle of fish were not affected by dietary AS levels (P> 0.05). Total carotenoid concentration in the muscle of fish fed the AS50 diet was higher than that of fish fed the control diet, but no different to that of fish fed the AS75 and AS100 diets. The astaxanthin concentration in the muscle of fish fed AS50, AS75 and AS100 diets were higher than that of control diet. The redness (a*) of the muscle of fish fed AS50, AS75 and AS100 diets were higher than that of fish fed the control diet (P 0.05) nije uticao na performansu rasta i hemijski sastav miÅ”iÄa ribe. Ukupna koncentracija karotenoida u miÅ”iÄu ribe koja je hranjena AS50 hranom bila je viÅ”a nego kod riba hranjenih kontrolnom hranom, ali nije bila drugaÄija od riba hranjenih AS75 i AS100 hranom. Koncentracija astaksantina u miÅ”iÄu riba hranjenih AS50, AS75 i AS100 hranom bila je viÅ”a nego kod riba hranjenih kontrolnom hranom. Crvena boja (a*) miÅ”iÄa ribe koja je hranjena AS50, AS75 i AS100 hranom bila je jaÄa nego kod ribe hranjene kontrolnom hranom (P< 0.05). Antioksidantna aktivnost DPPH, radikala hidroksila i alkila u plazmi i jetri riba nisu zavisili od nivoa astaksantina osim kod plazme koja je imala antioksidantnu aktivnost alkilnih radikala. Rezultati ove studije nagoveÅ”tavaju da se hrana koja sadrži 50 ppm astaksantina može koristiti da bi se poboljÅ”ala crvena boja miÅ”iÄne pigmentacije kod mlaÄi kalifornijske pastrmke
Kinetics of Isothermal Melt Crystallization in CaO-SiO2-CaF2-Based Mold Fluxes
A kinetic study for isothermal melt crystallization of CaO-SiO2-CaF2-based mold fluxes with different basicity of 0.94 and 1.34 has been carried out systematically by DSC measurements. The kinetic parameters were determined by Johnson-Mehl-Avrami equation. The average Avrami exponent of cuspidine (3CaO center dot 2SiO(2)center dot CaF2) crystallization for mold flux of lower basicity (0.94) is calculated to be 3.1, implying that the crystallization mode is instantaneous nucleation followed by 3-dimensional growth. For the mold flux of higher basicity (1.34), the average Avrami exponent of cuspidine equals to 3.4, strongly suggesting that the growth is still 3 dimensional but the nucleation should be continuous. It was found that the effective crystallization rate constant for both mold fluxes increases as the crystallization temperature decreases, showing that the crystallization rate could be governed by nucleation rate. The negative effective activation energy indicates an anti-Arrhenius behavior for crystallization of the mold fluxes studied. Therefore, it is concluded that the melt crystallization for the commercial mold fluxes will be determined by thermodynamics of nucleation which is relevant to degree of undercooling. The morphology of cuspidine crystals observed by SEM agreeds well with the isothermal crystallization kinetics results.open1173sciescopu
VirMAP for Cancer: Characterization of the Intratumoral Virome in Virally-Associated Cancers and a Resource for Investigators
View full abstracthttps://openworks.mdanderson.org/leading-edge/1040/thumbnail.jp
Genetic Diversity Analysis of South and East Asian Duck Populations Using Highly Polymorphic Microsatellite Markers
Native duck populations have lower productivity, and have not been developed as much as commercials duck breeds. However, native ducks have more importance in terms of genetic diversity and potentially valuable economic traits. For this reason, population discriminable genetic markers are needed for conservation and development of native ducks. In this study, 24 highly polymorphic microsatellite (MS) markers were investigated using commercial ducks and native East and South Asian ducks. The average polymorphic information content (PIC) value for all MS markers was 0.584, indicating high discrimination power. All populations were discriminated using 14 highly polymorphic MS markers by genetic distance and phylogenetic analysis. The results indicated that there were close genetic relationships among populations. In the structure analysis, East Asian ducks shared more haplotypes with commercial ducks than South Asian ducks, and they had more independent haplotypes than others did. These results will provide useful information for genetic diversity studies in ducks and for the development of duck traceability systems in the market
- ā¦