50 research outputs found

    How is spinal range of motion affected by disc- and facet degeneration and spinopelvic anatomy

    Full text link
    Background: We aimed to investigate how disc- and facet joint degeneration relate to ROM and spinopelvic alignment parameters. Their interrelation, however, is not yet understood, although eminent in patient specific modeling approaches and surgical decision making. Further is not yet sufficiently understood whether spinal alignment parameters relate to the degenerative states. Methods: The ROM of lumbar spinal segments was quantified using flexion/extension radiographs of 90 patients. The grades of degeneration of discs (IDD, Pfirrmann grades, n=440) and facet joints (FJD, Weishaupt classification, n=406) were assessed in CT and MRI scans. Results: The grade of IDD was significantly related to changes in ROM (p<0.01) whereas no association was observed with the amount of FJD. Grade V IDD was associated with a significant decrease in motion (p<0.01) compared to all other IDD grades (II-IV), which did not differ significantly among each other. The combined occurrence of IDD and FJD revealed the largest angular segmental ROM in segments with the lowest IDD (II) and lowest FJD (0). The lowermost ROM was present in fused segments (control), followed by those with severe IDD (V). In combination with FJD, the destabilizing effect of initial IDD was only observed if FJD was already in an advanced state. Conclusions: While the degree of facet joint degeneration seems not significantly associated with limitations in spinal motion, severe lumbar disc degeneration limits segmental motion, nearly equal to spinal fusion. This should affect counseling patients undergoing spinal fusion with questions on the probability of adjacent segment degeneration compared to the natural course. Keywords: Degenerative Disease; Facet Joint Degeneration; Facet Joint Osteoarthritis; Intervertebral Disc Degeneration; Kinematics; Sagittal Alignment

    Pelvic incidence-lumbar lordosis mismatch results in increased segmental joint loads in the unfused and fused lumbar spine

    Get PDF
    Purpose: Symptomatic adjacent segment disease (ASD) has been reported to occur in up to 27% of lumbar fusion patients. A previous study identified patients at risk according to the difference of pelvic incidence and lordosis. Patients with a difference between pelvic incidence and lumbar lordosis >15° have been found to have a 20 times higher risk for ASD. Therefore, it was the aim of the present study to investigate forces acting on the adjacent segment in relation to pelvic incidence-lumbar lordosis (PILL) mismatch as a measure of spino-pelvic alignment using rigid body modeling to decipher the underlying forces as potential contributors to degeneration of the adjacent segment. Methods: Sagittal configurations of 81 subjects were reconstructed in a musculoskeletal simulation environment. Lumbar spine height was normalized, and body and segmental mass properties were kept constant throughout the population to isolate the effect of sagittal alignment. A uniform forward/backward flexion movement (0°-30°-0°) was simulated for all subjects. Intervertebral joint loads at lumbar level L3-L4 and L4-L5 were determined before and after simulated fusion. Results: In the unfused state, an approximately linear relationship between sagittal alignment and intervertebral loads could be established (shear: 0° flexion r=0.36, p<0.001, 30° flexion r=0.48, p<0.001; compression: 0° flexion r=0.29, p<0.01, 30° flexion r=0.40, p<0.001). Additionally, shear changes during the transition from upright to 30° flexed posture were on average 32% higher at level L3-L4 and 14% higher at level L4-L5 in alignments that were clinically observed to be prone to ASD. Simulated fusion affected shear forces at the level L3-L4 by 15% (L4-L5 fusion) and 23% (L4-S1 fusion) more for alignments at risk for ASD. Conclusion: Higher adjacent segment shear forces in alignments at risk for ASD already prior to fusion provide a mechanistic explanation for the clinically observed correlation between PILL mismatch and rate of adjacent segment degeneration

    Fear avoidance beliefs are associated with reduced lumbar spine flexion during object lifting in pain-free adults

    Get PDF
    There is a long-held belief that physical activities such as lifting with a flexed spine is generally harmful for the back and can cause low back pain (LBP), potentially reinforcing fear avoidance beliefs underlying pain-related fear. In chronic LBP patients, pain-related fear has been shown to be associated with reduced lumbar range of motion during lifting, suggesting a protective response to pain. However, despite short term beneficial effects for tissue health, recent evidence suggests that maintaining a protective trunk movement strategy may also pose a risk for (persistent) LBP due to possible pro-nociceptive consequences of altered spinal motion, potentially leading to increased loading on lumbar tissues. Yet, it is unknown if similar protective movement strategies already exist in pain-free individuals which would yield potential insights into the role of fear avoidance beliefs in motor behavior in the absence of pain. Therefore, the aim of this study is to test whether fear avoidance beliefs influence spinal motion during lifting in a healthy cohort of pain-free adults without a history of chronic pain. The study subjects (N=57) filled out several pain-related fear questionnaires and were asked to perform a lifting task (5kg-box). High-resolution spinal kinematics were assessed using an optical motion capturing system. Time-sensitive analyses were performed based on statistical parametric mapping. The results demonstrated time-specific and negative relationships between self-report measures of pain-related fear and lumbar spine flexion angles during lifting, indicating potential unfavorable interactions between psychological factors and spinal motion during lifting in pain-free subjects

    Partial Pressure of Arterial Oxygen in Healthy Adults at High Altitudes: A Systematic Review and Meta-Analysis

    Get PDF
    Importance: With increasing altitude, the partial pressure of inspired oxygen decreases and, consequently, the Pao2_{2} decreases. Even though this phenomenon is well known, the extent of the reduction as a function of altitude remains unknown. Objective: To calculate an effect size estimate for the decrease in Pao2_{2} with each kilometer of vertical gain among healthy unacclimatized adults and to identify factors associated with Pao2_{2} at high altitude (HA). Data Sources: A systematic search of PubMed and Embase was performed from database inception to April 11, 2023. Search terms included arterial blood gases and altitude. Study Selection: A total of 53 peer-reviewed prospective studies in healthy adults providing results of arterial blood gas analysis at low altitude (&amp;lt;1500 m) and within the first 3 days at the target altitude (≥1500 m) were analyzed. Data Extraction and Synthesis: Primary and secondary outcomes as well as study characteristics were extracted from the included studies, and individual participant data (IPD) were requested. Estimates were pooled using a random-effects DerSimonian-Laird model for the meta-analysis. Main Outcomes and Measures: Mean effect size estimates and 95% CIs for reduction in Pao2_{2} at HA and factors associated with Pao2_{2} at HA in healthy adults. Results: All of the 53 studies involving 777 adults (mean [SD] age, 36.2 [10.5] years; 510 men [65.6%]) reporting 115 group ascents to altitudes between 1524 m and 8730 m were included in the aggregated data analysis; 13 of those studies involving 305 individuals (mean [SD] age, 39.8 [13.6] years; 185 men [60.7%]) reporting 29 ascents were included in the IPD analysis. The estimated effect size of Pao2_{2} was −1.60 kPa (95% CI, −1.73 to −1.47 kPa) for each 1000 m of altitude gain (τ2^{2} = 0.14; I2^{2} = 86%). The Pao2_{2} estimation model based on IPD data revealed that target altitude (−1.53 kPa per 1000 m; 95% CI, −1.63 to −1.42 kPa per 1000 m), age (−0.01 kPa per year; 95% CI, −0.02 to −0.003 kPa per year), and time spent at an altitude of 1500 m or higher (0.16 kPa per day; 95% CI, 0.11-0.21 kPa per day) were significantly associated with Pao2_{2}. Conclusions and Relevance: In this systematic review and meta-analysis, the mean decrease in Pao2_{2} was 1.60 kPa per 1000 m of vertical ascent. This effect size estimate may improve the understanding of physiological mechanisms, assist in the clinical interpretation of acute altitude illness in healthy individuals, and serve as a reference for physicians counseling patients with cardiorespiratory disease who are traveling to HA regions

    Musikpausenbox. Musikalische Ãœbungen zur Konzentration und Entspannung im Unterricht

    No full text
    Im Alltag eines Primarschulkindes sind Pausen ein wichtiger Bestandteil der Schule. Sie bilden die Brücke zwischen einzelnen Fächern, geben Luft zum Atmen, erhöhen die Merkfähigkeit und fördern die Klassenatmosphäre. Für die Gestaltung von Pausen bietet sich die Musik an. Mit diversen Inhalten fördert sie die Konzentration und Entspannung auf aktiver und rezeptiver Ebene. Neben den im Lehrplan 21 beschriebenen Fachkompetenzen wird durch Musik auch die Sozial- und Selbstkompetenz gefördert. In der vorliegenden Bachelorarbeit wird aufgezeigt, wie man das oft vergessene Schulfach Musik flexibel und gezielt in den regulären Unterricht einbauen kann. Für die Erarbeitung wurde Literatur aus der Musiktherapie, Musikpsychologie, Didaktik und Pädagogik miteinbezogen. Als Produkt wurde eine Sammlung von musikalischen Übungen für verschiedene Pausen hergestellt. Geordnet ist die Sammlung in die musikalischen Bereiche Konzentration und Entspannung

    Spinal sagittal alignment goals based on statistical modelling and musculoskeletal simulations

    Full text link
    The definition of target alignment for spinal fusion surgery follows anatomical criteria and strongly relies on surgical experience. However, the optimal patient-specific alignment often remains unknown. Statistical models could provide information about physiological alignments, and musculoskeletal models are powerful tools to investigate biomechanics. We aimed to statistically predict alignments and hypothesized they would be biomechanically favorable. A statistical model was trained with 60 annotated radiographs to predict physiological sagittal alignment based on position of femoral heads and sacrum. Predicted alignments for 11 back pain patients were clinically evaluated in terms of balance and compared to Original alignments. The normative ranges for spinal balance parameters were obtained from Surgimap™. Musculoskeletal loads were furthermore simulated in upright standing and 30° forward flexion, using alignment-specific musculoskeletal models. For the majority of Predicted alignments (n = 9) at least two of three investigated balance parameters were within the normative range, as opposed to the minority of the Original alignments (n = 4). Predicted alignments resulted in significantly lowered overall muscle activity and compressive loads (all levels, both postures). Shear force magnitudes in upright standing decreased significantly at levels L1L2 (-68 N) and L2L3 (-69 N) and clearly yet not significantly at L3L4 (-39 N) and L4L5 (-152 N). Shear loads at level L5S1 remained the same. In flexed postures identical trends were observed. The statistical model was able to predict spinal alignments that led to both improved balance and reduced musculoskeletal loads. Further studies are needed to investigate clinical validity of such models

    Intervertebral reaction force prediction using an enhanced assembly of OpenSim models

    Full text link
    OpenSim offers a valuable approach to investigating otherwise difficult to assess yet important biomechanical parameters such as joint reaction forces. Although the range of available models in the public repository is continually increasing, there currently exists no OpenSim model for the computation of intervertebral joint reactions during flexion and lifting tasks. The current work combines and improves elements of existing models to develop an enhanced model of the upper body and lumbar spine. Models of the upper body with extremities, neck and head were combined with an improved version of a lumbar spine from the model repository. Translational motion was enabled for each lumbar vertebrae with six controllable degrees of freedom. Motion segment stiffness was implemented at lumbar levels and mass properties were assigned throughout the model. Moreover, body coordinate frames of the spine were modified to allow straightforward variation of sagittal alignment and to simplify interpretation of results. Evaluation of model predictions for level L1-L2, L3-L4 and L4-L5 in various postures of forward flexion and moderate lifting (8 kg) revealed an agreement within 10% to experimental studies and model-based computational analyses. However, in an extended posture or during lifting of heavier loads (20 kg), computed joint reactions differed substantially from reported in vivo measures using instrumented implants. We conclude that agreement between the model and available experimental data was good in view of limitations of both the model and the validation datasets. The presented model is useful in that it permits computation of realistic lumbar spine joint reaction forces during flexion and moderate lifting tasks. The model and corresponding documentation are now available in the online OpenSim repository

    Skin marker-based subject-specific spinal alignment modeling: A feasibility study

    Get PDF
    Musculoskeletal models have the potential to improve diagnosis and optimize clinical treatment by predicting accurate outcomes on an individual basis. However, the subject-specific modeling of spinal alignment is often strongly simplified or is based on radiographic assessments, exposing subjects to unnecessary radiation. We therefore developed and introduced a novel skin marker-based approach for modeling subject-specific spinal alignment and evaluated its feasibility by comparing the predicted L1/L2 spinal loads during various functional activities with the loads predicted by the generically scaled models as well as with in vivo measured data obtained from the OrthoLoad database. Spinal loading simulations resulted in considerably higher compressive forces for both scaling approaches over all simulated activities, and AP shear forces that were closer or similar to the in vivo data for the subject-specific approach during upright standing activities and for the generic approach during activities that involved large flexions. These results underline the feasibility of the proposed method and associated workflow for inter- and intra-subject investigations using musculoskeletal simulations. When implemented into standard model scaling workflows, it is expected to improve the accuracy of muscle activity and joint loading simulations, which is crucial for investigations of treatment effects or pathology-dependent deviations

    How is spinal range of motion affected by disc- and facet degeneration and spinopelvic anatomy?

    No full text
    Background We aimed to investigate how disc- and facet joint degeneration relate to ROM and spinopelvic alignment parameters. Their interrelation, however, is not yet understood, although eminent in patient specific modeling approaches and surgical decision making. Further is not yet sufficiently understood whether spinal alignment parameters relate to the degenerative states. Methods The ROM of lumbar spinal segments was quantified using flexion/extension radiographs of 90 patients. The grades of degeneration of discs (IDD, Pfirrmann grades, n=440) and facet joints (FJD, Weishaupt classification, n=406) were assessed in CT and MRI scans. Results The grade of IDD was significantly related to changes in ROM (p<0.01) whereas no association was observed with the amount of FJD. Grade V IDD was associated with a significant decrease in motion (p<0.01) compared to all other IDD grades (II-IV), which did not differ significantly among each other. The combined occurrence of IDD and FJD revealed the largest angular segmental ROM in segments with the lowest IDD (II) and lowest FJD (0). The lowermost ROM was present in fused segments (control), followed by those with severe IDD (V). In combination with FJD, the destabilizing effect of initial IDD was only observed if FJD was already in an advanced state. Conclusions While the degree of facet joint degeneration seems not significantly associated with limitations in spinal motion, severe lumbar disc degeneration limits segmental motion, nearly equal to spinal fusion. This should affect counseling patients undergoing spinal fusion with questions on the probability of adjacent segment degeneration compared to the natural course.ISSN:2666-548
    corecore