A successful experimental model for intimal hyperplasia prevention using a resveratrol eluting balloon

Objective: Restenosis due to intimal hyperplasia is a major clinical problem that compromises the success of angioplasty and endovascular surgery. Resveratrol (RSV) has demonstrated a beneficial effect on restenosis from angioplasty. Unfortunately, the physicochemical characteristics of RSV reduce the practicality of its immediate clinical application. This work proposes an experimental model aiming to setup an intravessel, elutable, RSV-containing compound. Methods: A 140 mg/mL RSV sterile injectable solution with a suitable viscosity for intravascular administration by drugdelivery catheter (RSV-c) was prepared. This solution was locally administered in the common iliac artery of adult male New Zealand White rabbits using a dedicated device (Genie; Acrostak, Geneva, Switzerland) after the induction of intimal hyperplasia by traumatic angioplasty. The RSV concentrations in the wall artery were determined, and the thickness of the harvested iliac arteries was measured over a 1-month period. Results: The Genie catheter was applied in rabbit vessels, and the local delivery resulted in an effective reduction in restenosis after plain angioplasty. Notably, RSV-c forced into the artery wall by balloon expansion might accumulate in the interstitial areas or within cells, avoiding the washout of solutions. Magnification micrographs showed intimal proliferation was significantly inhibited when RSV-c was applied. Moreover, no adverse events were documented in in vitro or in vivo studies. Conclusions: RSV can be advantageously administered in the arterial walls by a drug-delivery catheter to reduce the risk of restenosis

Intravital three-dimensional bioprinting

Fabrication of three-dimensional (3D) structures and functional tissues directly in live animals would enable minimally invasive surgical techniques for organ repair or reconstruction. Here, we show that 3D cell-laden photosensitive polymer hydrogels can be bioprinted across and within tissues of live mice, using bio-orthogonal two-photon cycloaddition and crosslinking of the polymers at wavelengths longer than 850 nm. Such intravital 3D bioprinting—which does not create by-products and takes advantage of commonly available multiphoton microscopes for the accurate positioning and orientation of the bioprinted structures into specific anatomical sites—enables the fabrication of complex structures inside tissues of live mice, including the dermis, skeletal muscle and brain. We also show that intravital 3D bioprinting of donor-muscle-derived stem cells under the epimysium of hindlimb muscle in mice leads to the de novo formation of myofibres in the mice. Intravital 3D bioprinting could serve as an in vivo alternative to conventional bioprinting

Intravital three-dimensional bioprinting

Fabrication of three-dimensional (3D) structures and functional tissues directly in live animals would enable minimally invasive surgical techniques for organ repair or reconstruction. Here, we show that 3D cell-laden photosensitive polymer hydrogels can be bioprinted across and within tissues of live mice, using bio-orthogonal two-photon cycloaddition and crosslinking of the polymers at wavelengths longer than 850 nm. Such intravital 3D bioprinting\u2014which does not create by-products and takes advantage of commonly available multiphoton microscopes for the accurate positioning and orientation of the bioprinted structures into specific anatomical sites\u2014enables the fabrication of complex structures inside tissues of live mice, including the dermis, skeletal muscle and brain. We also show that intravital 3D bioprinting of donor-muscle-derived stem cells under the epimysium of hindlimb muscle in mice leads to the de novo formation of myofibres in the mice. Intravital 3D bioprinting could serve as an in vivo alternative to conventional bioprinting

Impact of semi-solid formulations on skin penetration of iron oxide nanoparticles

Background: This work aimed to provide useful information on the incidence of the choice of formulation in semi-solid preparations of iron-oxide nanoparticles (IONs). The appropriate analytical methods to assess the IONs physical stability and the effect of the semi-solid preparations on IONs human skin penetration were discussed. The physical stability of IONs (Dh = 31 \ub1 4 nm; \u3b6 = -65 \ub1 5 mV) loaded in five semi-solid preparations (0.3% w/v), namely Carbopol gel (CP), hydroxyethyl cellulose gel (HEC), carboxymethylcellulose gel (CMC), cetomacrogol cream (Cet) and cold cream was assessed by combining DLS and low-field pulsed NMR data. The in vitro penetration of IONs was studied using human epidermis or isolated stratum corneum (SC). Results: Reversible and irreversible IONs aggregates were evidenced only in HEC and CMC, respectively. IONs diffused massively through SC preferentially by an intercellular pathway, as assessed by transmission electron microscopy. The semi-solid preparations differently influenced the IONs penetration as compared to the aqueous suspension. Cet cream allowed the highest permeation and the lowest retained amount, while cold cream and CP favored the accumulation into the skin membrane. Conclusion: Basic cutaneous semi-solid preparations could be used to administer IONs without affecting their permeation profile if they maintained their physical stability over time. This property is better discriminated by low-field pulsed NMR measurements than the commonly used DLS measurements

Involvement of a specificity proteins-binding element in regulation of basal and estrogen-induced transcription activity of the BRCA1 gene

INTRODUCTION:Increased estrogen level has been regarded to be a risk factor for breast cancer. However, estrogen has also been shown to induce the expression of the tumor suppressor gene, BRCA1. Upregulation of BRCA1 is thought to be a feedback mechanism for controlling DNA repair in proliferating cells. Estrogens enhance transcription of target genes by stimulating the association of the estrogen receptor (ER) and related coactivators to estrogen response elements or to transcription complexes formed at activator protein (AP)-1 or specificity protein (Sp)-binding sites. Interestingly, the BRCA1 gene lacks a consensus estrogen response element. We previously reported that estrogen stimulated BRCA1 transcription through the recruitment of a p300/ER-alpha complex to an AP-1 site harbored in the proximal BRCA1 promoter. The purpose of the study was to analyze the contribution of cis-acting sites flanking the AP-1 element to basal and estrogen-dependent regulation of BRCA1 transcription.METHODS:Using transfection studies with wild-type and mutated BRCA1 promoter constructs, electromobility binding and shift assays, and DNA-protein interaction and chromatin immunoprecipitation assays, we investigated the role of Sp-binding sites and cAMP response element (CRE)-binding sites harbored in the proximal BRCA1 promoter.RESULTS:We report that in the BRCA1 promoter the AP-1 site is flanked upstream by an element (5'-GGGGCGGAA-3') that recruits Sp1, Sp3, and Sp4 factors, and downstream by a half CRE-binding motif (5'-CGTAA-3') that binds CRE-binding protein. In ER-alpha-positive MCF-7 cells and ER-alpha-negative Hela cells expressing exogenous ER-alpha, mutation of the Sp-binding site interfered with basal and estrogen-induced BRCA1 transcription. Conversely, mutation of the CRE-binding element reduced basal BRCA1 promoter activity but did not prevent estrogen activation. In combination with the AP-1/CRE sites, the Sp-binding domain enhanced the recruitment of nuclear proteins to the BRCA1 promoter. Finally, we report that the MEK1 (mitogen-activated protein kinase kinase-1) inhibitor PD98059 attenuated the recruitment of Sp1 and phosphorylated ER-alpha, respectively, to the Sp and AP-1 binding element.CONCLUSION:These cumulative findings suggest that the proximal BRCA1 promoter segment comprises cis-acting elements that are targeted by Sp-binding and CRE-binding proteins that contribute to regulation of BRCA1 transcription.This item is part of the UA Faculty Publications collection. For more information this item or other items in the UA Campus Repository, contact the University of Arizona Libraries at [email protected]

Unified construction of finite element and finite volume discretizations for compressible flows

A framework for the construction of node-centred schemes to solve the compressible Euler and Navier-Stokes equations is presented. The metric quantities are derived by exploiting some properties of CO finite element shape functions. The resulting algorithm allows to implement both artificial diffusion and one-dimensional upwind-type discretizations. The proposed methodology adopts a uniform data structure for diverse grid topologies (structured, unstructured and hybrid) and different element shapes, thus easing code development and maintenance. The final schemes are well suited to run on vector/parallel computer architectures. In the case of linear elements, the equivalence of the proposed method with a particular finite volume formulation is demonstrated

Fully anisotropic unstructured grid generation with application to aircraft design

This paper describes a fully automatic 3D anisotropic mesh generation method for domains of arbitrary shape. The spacing of the boundary mesh is computed by the analysis of the principal curvatures and directions of the boundary surfaces. The spacing in the domain is obtained by interpolation of the spacing at the boundaries on a suitably constructed background mesh. Examples which illustrate the performance of the proposed methodology are presented

An Investigation of Roe's Linearization and Average for Ideal and Real Gases

Scientific Report DIA-SR 99-01 Dipartimento di Ingegneria Aerospaziale Politecnico di Milan