Sequential Purification and Crystal Growth for the Production of Low Cost Silicon Substrates: Quarterly Technical Progress Report No. 3, April 1 - June 30, 1980

The objective of this program is to identify and develop low cost processing for fabricating large grain size polycrystalline silicon substrates. Metallurgical grade silicon (MG-Si) is chosen as the starting material for sequential purification and crystal growth. As shown in the previous two technical reports, several purification techniques have been studied. They include (l) acid leaching with HCl, (2) physical separation of insoluble impurities, (3) reactive gas treatment of molten silicon, and (4) slagging using a mixed-oxide slag. In this quarterly period purification by vacuum treatment and by impurity redistribution using ingot pulling has been studied

Orchestrating Forest Policy in Italy: Mission Impossible?

In the Italian political and economic agenda the forest sector occupies a marginal role. The forest sector in Italy is characterized by a high institutional fragmentation and centralized decision-making processes dominated by Public Forest Administrations. Public participation in forest policy processes has been implemented since the 1990s at national, regional and local levels in several cases. However, today no significant changes have been observed in the overall governance of the forest sector and stakeholders' involvement in Italian forest policy decision-making is still rather limited. The aims of this paper are to describe the state of forest-related participatory processes in Italy at various levels (national, regional and local) and identify which factors and actors hinder or support the establishment and implementation of participatory forest-related processes in the country. The forest-related participatory processes are analyzed adopting a qualitative-based approach and interpreting interactive, complex and non-linear participatory processes through the lens of panarchy theory

Marble Architectural Elements and Liturgical Furniture of the Santa Giustina Basilica in Padova : New Archaeometric Data on the Importation of Proconnesian Marble in the Late Antique Adriatic

This paper examines eight marble samples from the architectural elements and liturgical furniture of the ecclesiastical complex of Santa Giustina in Padova (Italy), founded by the Rufus Venantius Opilio before AD 524. The provenance determination of the marbles was carried out by means of a multi-analytical approach combining mineralogical-petrographic investigations, performed by microscopic observations of thin sections, and the measurement of the ratios of stable carbon and oxygen isotopes. The results obtained were compared with up-to-date petrographic and isotopic databases (Antonelli and Lazzarini 2015), and they showed that the analyzed marbles come from the quarries of the island of Proconnesus in Asia Minor, modern Marmara Adasi (Turkey). Archaeometric evidence, together with the stylistic and functional analysis of the pieces, suggests the direct importation of a complete set of sculptures, shipped at different stages of workmanship from the workshops of Constantinople and expressly ordered by a single patron, who can be identified as Opilio, founder of the basilica of Santa Giustina and praetorian prefect at the court of King Theodoric

Effects of micelle nature and concentration on the acid dissociation constants of the metal extractor PADA

The pyridine-2-azo-p-dimethylaniline (PADA) ligand presents two acid dissociation constants, being pKa1 related to the pyridinium and pKa2 related to the anilinium residue. These have been measured by spectrophotometric titrations in aqueous solutions containing either the anionic (SDS), or the non–ionic (Triton X-100) or the cationic (DTAC) surfactants. The pKai shifts of the charged systems from that of the PADA/Triton X-100 reference (∆pKai0) are compared. For PADA/DTAC ∆pKa10 = 0.05 and ∆pKa20 = 0.6. For PADA/SDS ∆pKa10 = 2.1 and ∆pKa20 = 2.1 both yielding the value of -126 mV for the surface potential (ψ) of SDS. The ψ value, lying between the calculated Stern potential and the zeta potential, indicates that the dye is located on the SDS micelles between the fixed and the shear layer. In contrast, the behaviour of PADA/DTAC is explained assuming that the positively charged deprotonation sites of PADA are forced to protrude towards the bulk solvent by the positive charges of DTAC micelles. The shifts of the apparent pKai from the aqueous values (∆pKaiw) have also been analysed. Concerning PADA/Triton X-100, the shifts ∆pKa1w = -0.1 and ∆pKa2w = -0.9 are rationalized in terms of dielectric constant reduction at the reaction sites. Concerning PADA/DTAC, ∆pKa1w= -0.05 and ∆pKa2w= -0.3 whereas, for PADA/SDS, ∆pKa1w = 2.0 and ∆pKa2w = 1.2. The pKa2w values decrease on raising the surfactant concentrations for all the investigated systems. This behaviour is explained assuming that the increase of the overall micellar surface and, by consequence, of the reaction sites number, results in a site dilution effect which disfavours proton association. The addition of NaCl induces changes of pKa1 and pKa2 which are explained in terms of (large) reduction of ψ for PADA/SDS and of (small) reduction of the dielectric constant for the other systems

Dark Energy Survey Year 3 results: Cosmology from cosmic shear and robustness to modeling uncertainty

This work and its companion paper, Amon et al. [Phys. Rev. D 105, 023514 (2022)PRVDAQ2470-001010.1103/PhysRevD.105.023514], present cosmic shear measurements and cosmological constraints from over 100 million source galaxies in the Dark Energy Survey (DES) Year 3 data. We constrain the lensing amplitude parameter S8 ≡ σ8 √ωm/0.3 at the 3% level in ΛCDM: S8 = 0.759-0.023+0.025 (68% CL). Our constraint is at the 2% level when using angular scale cuts that are optimized for the ΛCDM analysis: S8=0.772-0.017+0.018 (68% CL). With cosmic shear alone, we find no statistically significant constraint on the dark energy equation-of-state parameter at our present statistical power. We carry out our analysis blind, and compare our measurement with constraints from two other contemporary weak lensing experiments: the Kilo-Degree Survey (KiDS) and Hyper-Suprime Camera Subaru Strategic Program (HSC). We additionally quantify the agreement between our data and external constraints from the Cosmic Microwave Background (CMB). Our DES Y3 result under the assumption of ΛCDM is found to be in statistical agreement with Planck 2018, although favors a lower S8 than the CMB-inferred value by 2.3σ (a p-value of 0.02). This paper explores the robustness of these cosmic shear results to modeling of intrinsic alignments, the matter power spectrum and baryonic physics. We additionally explore the statistical preference of our data for intrinsic alignment models of different complexity. The fiducial cosmic shear model is tested using synthetic data, and we report no biases greater than 0.3σ in the plane of S8 × ωm caused by uncertainties in the theoretical model

Dark Energy Survey Year 3 Results: Three-point shear correlations and mass aperture moments

We present high signal-to-noise measurements of three-point shear correlations and the third moment of the mass aperture statistic using the first 3 years of data from the Dark Energy Survey. We additionally obtain the first measurements of the configuration and scale dependence of the four three-point shear correlations which carry cosmological information. With the third-order mass aperture statistic, we present tomographic measurements over angular scales of 4 to 60 arcminutes with a combined statistical significance of 15.0σ. Using the tomographic information and measuring also the second-order mass aperture, we additionally obtain a skewness parameter and its redshift evolution. We find that the amplitudes and scale-dependence of these shear 3pt functions are in qualitative agreement with measurements in a mock galaxy catalog based on N-body simulations, indicating promise for including them in future cosmological analyses. We validate our measurements by showing that B-modes, parity-violating contributions and PSF modeling uncertainties are negligible, and determine that the measured signals are likely to be of astrophysical and gravitational origi

Mechanistic aspects of thioflavin-T self-aggregation and DNA binding: evidence for dimer attack on DNA grooves

Thioflavin-T (TFT) is a fluorescent marker widely employed in biomedical research but the mechanism of its binding to polynucleotides has been poorly understood. This paper presents a study of the mechanisms of TFT self-aggregation and binding to DNA. Relaxation kinetics of TFT solutions show that the cyanine undergoes dimerization followed by dimer isomerisation. The interaction of TFT with DNA has been investigated using static methods, such as spectrophotometric and spectrofluorometric titrations under different conditions (salt content, temperature), fluorescence quenching, viscometric experiments and the T-jump relaxation method. The combined use of these techniques enabled us to show that the TFT monomer undergoes intercalation between the DNA base pairs and external binding according to a branched mechanism. Moreover, it has also been observed that, under dye excess conditions, the TFT dimer binds to the DNA grooves. The molecular structures of intercalated TFT and the groove-bound TFT dimer are obtained by performing QM/MM MD simulations