Asymmetric Organocatalysis-A Powerful Technology Platform for Academia and Industry: Pregabalin as a Case Study

Enantioselective organocatalysis has quickly established itself as the third pillar of asymmetric catalysis. It is a powerful technology platform, and it has a tremendous impact in both academic and industrial settings. By focusing on pregabalin, as a case study, this Perspective aims to show how a process amenable to industry of a simple chiral molecule can be tackled in several different ways using organocatalysis

A Catalytic One-Pot Synthesis of Indolyl Cyclobutanones

A general strategy for the synthesis of indolyl cyclobutanones via a tandem Bronsted acid catalyzed 2-hydroxycyclobutanone activation-indole nucleophilic addition has been exploited. The procedure leads to a wide range of 2- and 3-functionalized indole derivatives in good to high yields with broad substrate scope

Solvent-Free Synthesis of Quaternary Oxazolidine-2-thione β3-Amino Ester Analogs

A solvent-free organocatalyzed intermolecular cyclization reaction starting from β-substituted γ-hydroxy-α,β-unsaturated esters and aryl isothiocyanates proceeds via an aza-Michael addition to provide previously unknown quaternary oxazolidine-2-thione β3 amino ester analogs. A panel of diversely-substituted esters was investigated, including β,γ-disubstituted examples which provided the target molecules with very high cis diastereoselectivity

Mealworm (Tenebrio molitor): Potential and challenges to promote circular economy

Over the last few years, the concept of Circular Economy (CE) has received a lot of atten-tion due to its potential contribution to the Sustainable Development Goals (SDGs), especially by reconciling economic growth with the protection of the environment through its grow-make-use-restore approach. The use of insects in circular production systems has been a good example of this concept as insects can transform a wide range of organic waste and by-products into nutritious feedstuffs, which then go back into the production cycle. This paper explores the potential of meal-worms (Tenebrio molitor) in circular production systems by reviewing their use and applicability in several industries such as pharmaceuticals, agriculture, food, etc. Despite the high versatility of this insect and its potential as a substitute source of nutrients and other valuable components, there are still many legislative and behavioural challenges that hinder its adoption and acceptance

Obsessive–compulsive symptoms in young women affected with anorexia nervosa, and their relationship with personality, psychopathology, and attachment style

PURPOSE: Obsessive–compulsive symptoms (OC) are associated with greater morbidity and worse prognosis in anorexia nervosa (AN). We assessed the presence of non-eating OC in participants with AN and related them with their psychopathology, personality, and attachment style features. METHODS: Young women with AN (N = 41, 30 restrictor and 11 binge-purging type) were assessed on the Yale-Brown Obsessive–Compulsive Scale (Y-BOCS). These participants with AN and 82 healthy controls (HC) completed the Temperament and Character Inventory (TCI), Eating Disorder Inventory-2 (EDI-2), Symptom Checklist-90 (SCL-90), Toronto Alexithymia Scale (TAS-20), and Attachment Style Questionnaire (ASQ). The association between Y-BOCS scores and indexes of psychopathology, personality, and attachment were examined. RESULTS: AN had significantly higher scores than HC on the EDI-2, SCL-90, TAS-20, ASQ-Need for Approval, and TCI-Harm Avoidance and Self-directedness. The Y-BOCS scores were significantly correlated with ASQ-Need for Approval, TAS-20-Difficulty in Describing Feelings, SCL-90-Phobic Anxiety, and Anxiety, EDI-2-Drive to Thinness, and Asceticism. Need for Approval displayed the strongest correlation with OC symptoms. Difficulty in describing feelings displayed the strongest correlation with compulsive OC symptoms. CONCLUSIONS: OC traits in AN were primarily associated with measures of insecure attachment rather than to their eating disorder or general psychopathology. Therapeutic approaches to correcting insecure attachment may be considered as a possible approach to treating AN patients with OC. The study supports a new psychopathological perspective for understanding the meaning of OC symptoms in AN. LEVEL OF EVIDENCE: III: Evidence obtained from cohort or case–control analytic studies

Soft-templated NiO–CeO2 mixed oxides for biogas upgrading by direct CO2 methanation

The catalytic performance in the direct CO2 methanation of a model biogas is investigated on NiO-CeO2 nanostructured mixed oxides synthesized by the soft-template procedure with different Ni/Ce molar ratios. The samples are thoroughly characterized by means of ICP-AES, XRD, TEM and HR-TEM, N2 physisorption at -196 °C, and H2-TPR. They result to be constituted of CeO2 rounded nanocrystals and of polycrystalline needle-like NiO particles. After a H2-treatment at 400 C for 1 h, the surface basic properties and the metal surface area are also assessed using CO2 adsorption microcalorimetry and H2-pulse chemisorption measurements, respectively. At increasing Ni content the Ni0 surface area increases, while the opposite occurs for the number of basic sites. Using a CO2/CH4/H2 feed, at 11,000 cm3 h-1 gcat-1, CO2 conversions in the 83-89 mol% range and methane selectivities >99.5 mol% are reached at 275 °C and atmospheric pressure, highlighting the very good performances of the investigated catalysts

As(III, V) Uptake from Nanostructured Iron Oxides and Oxyhydroxides: The Complex Interplay between Sorbent Surface Chemistry and Arsenic Equilibria

Iron oxides/oxyhydroxides, namely maghemite, iron oxide-silica composite, akaganeite, and ferrihydrite, are studied for AsV and AsIII removal from water in the pH range 2–8. All sorbents were characterized for their structural, morphological, textural, and surface charge properties. The same experimental conditions for the batch tests permitted a direct comparison among the sorbents, particularly between the oxyhydroxides, known to be among the most promising As-removers but hardly compared in the literature. The tests revealed akaganeite to perform better in the whole pH range for AsV (max 89 mg g−1 at pH0 3) but to be also efficient toward AsIII (max 91 mg g−1 at pH0 3– 8), for which the best sorbent was ferrihydrite (max 144 mg g−1 at pH0 8). Moreover, the study of the sorbents’ surface chemistry under contact with arsenic and arsenic-free solutions allowed the understanding of its role in the arsenic uptake through electrophoretic light scattering and pH measurements. Indeed, the sorbent’s ability to modify the starting pH was a crucial step in determining the removal of performances. The AsV initial concentration, contact time, ionic strength, and presence of competitors were also studied for akaganeite, the most promising remover, at pH0 3 and 8 to deepen the uptake mechanism

On the role of the nature and density of acid sites on mesostructured aluminosilicates dehydration catalysts for dimethyl ether production from CO2

In this work, we designed four different mesostructured acidic materials to be used as methanol dehydration catalysts for the one-pot CO2-to-DME process, in the form of physical mixtures with a Cu/ZnO/Al2O3-based commercial redox catalyst (CZA). The studied systems consist in a mesostructured gamma-Al2O3 and three mesostructured aluminosilicates (namely Al-MCM-41, Al-SBA-15, and Al-SBA-16) with the same Si/Al ratio (= 15) but significantly different textural properties. The main goal of this work is to understand how the textural features can influence the acidic properties (typology, amount, strength, surface density) and, consequently, how catalytic performances can be correlated with acidic features. On this note, we found that the systems presenting both Bronsted and Lewis sites (namely the three aluminosilicates) show much better catalytic performances than gamma-Al2O3, that only features Lewis sites, thus implying that Bronsted sites are more active towards methanol dehydration than Lewis sites. The three aluminosilicates, despite presenting comparable amounts of Bronsted sites, show significantly different performances in terms of selectivity to DME; particularly, Al-SBA-16, the system with the lowest surface area, proved to be the most efficient catalyst. This finding led us to infer that, besides Bronsted acidity, a high surface density of acid sites is a key factor to obtain a high dehydration activity; being methanol dehydration a bi-molecular reaction, the close proximity of two acid sites would indeed favor the kinetics of the process

Quality of eggs from Lohmann Brown Classic laying hens fed black soldier fly meal as substitute for soya bean

Soya bean is the main protein source in poultry feed but rising prices make an alternative protein source necessary. Insects, such as the black soldier fly (Hermetia illucens), may be an attractive solution for hens, although little information is available on their effect on egg quality. The present study aims to fill this gap by testing the effect of 100% replacement of soya bean with H. illucens larva meal in the diet of Lohmann Brown Classic laying hens for 21 weeks. At the end of the trial, the eggs were characterized for parameters such as weight, colour, proximate composition of albumen and yolk, and content of carotenoids, tocopherols and cholesterol. The fatty acid profile of yolks was also determined. Hens fed the insect-based diet produced eggs (HIM group) with a higher proportion of yolk than the group fed the soya bean-based diet (SBM group). HIM was associated with redder yolks (red index 5.63 v. 1.36) than SBM. HIM yolks were richer in γ-tocopherol (4.0 against 2.4 mg/kg), lutein (8.6 against 4.9 mg/kg), β-carotene (0.33 against 0.19 mg/kg) and total carotenoids (15 against 10.5 mg/kg) than SBM yolks. The fatty acid composition of HIM yolks was almost identical to that of SBM yolks. Finally, HIM yolks contained 11% less cholesterol than SBM yolks. These results suggest that H. illucens larva meal is a suitable total substitute for soya bean meal in the diet of Lohmann Brown Classic laying hens. A sustainable alternative to the plant protein source therefore seems feasible

Continuous-Flow Synthesis of Arylthio-Cyclopropyl Carbonyl Compounds

The straightforward, continuous-flow synthesis of cyclopropyl carbaldehydes and ketones has been developed starting from 2-hydroxycyclobutanones and aryl thiols. This acid-catalyzed mediated procedure allows access to the multigram and easily scalable synthesis of cyclopropyl adducts under mild conditions, using reusable Amberlyst-35 as a catalyst. The resins, suitably ground and used for filling steel columns, have been characterized via TGA, ATR, SEM and BET analyses to describe the physical-chemical properties of the packed bed and the continuous-flow system in detail. To highlight the synthetic versatility of the arylthiocyclopropyl carbonyl compounds, a series of selective oxidation reactions have been performed to access sulfoxide and sulfone carbaldehyde cyclopropanes, oxiranes and carboxylic acid derivatives