Influence of saliva and mucin on the adhesion of Candida oral clinical isolates

Objectives: This research work intends to clarify the role of artificial saliva, in particularly the role of mucin, a salivary protein, on the surface properties and adhesion ability of Candida spp. oral clinical isolates to abiotic surfaces. Methods: Four oral clinical isolates of Candida spp. were used: two Candida albicans strains (AC; AM) and two Candida parapsilosis strains (AD; AM2). The strains were isolated from patients using oral prosthesis. The microorganisms were cultured in the absence or presence of mucin and artificial saliva, and their adhesion to an abiotic surface (coated with mucin and artificial saliva) was evaluated. Results: The presence of mucin per se onto the abiotic surface decreased the adhesion of all strains, although the combination of mucin with artificial saliva had reduced this effect. No direct correlation between adhesion and the surface free energies of adhesion of the microorganisms was found. Significance: Candida spp. were human commensal microorganisms that became pathogenic when the host immune defenses were compromised. Medical devices were colonized by Candida spp. particularly, oral prostheses, which might lead to the degradation of the prostheses and systemic infections. The salivary secretions that constantly cover the oral cavity influenced Candida spp. adhesion process. Therefore, it was important to understand the interactions between Candida spp., salivary proteins and the characteristic of oral prosthesis when developing materials for oral prostheses.The authors thank the Project “BioHealth-Biotechnology and Bioengineering approaches to improve health quality”, Ref. NORTE-07-0124-FEDER-000027, co-funded by the Programa Operacional Regional do Norte (ON.2-O Novo Norte), QREN, FEDER. The would also like to thank the Fundação para a Ciência e Tecnologia for the Strategic Project Pest-OE/EQB/LA0023/2013 and Fundação para a Ciência e Tecnologia (FCT) for Ana Oliveira PhD Grant (SFRH/BD/68588/2010) and Catarina L. Seabra PhD Grant (SFRH/BD/89001/2012). The authors would also like to acknowledge Professora Rosário Oliveira, which is no longer with us, for her exceptional contribution and dedication to this work

Symmetric arrangement of mitochondria:plasma membrane contacts between adjacent photoreceptor cells regulated by Opa1

Mitochondria are known to play an essential role in photoreceptor function and survival that enables normal vision. Within photoreceptors, mitochondria are elongated and extend most of the inner-segment length, where they supply energy for protein synthesis and the phototransduction machinery in the outer segment, as well as acting as a calcium store. Here, we examined the arrangement of the mitochondria within the inner segment in detail using three-dimensional (3D) electron microscopy techniques and show they are tethered to the plasma membrane in a highly specialized arrangement. Remarkably, mitochondria and their cristae openings align with those of neighboring inner segments. The pathway by which photoreceptors meet their high energy demands is not fully understood. We propose this to be a mechanism to share metabolites and assist in maintaining homeostasis across the photoreceptor cell layer. In the extracellular space between photoreceptors, Müller glial processes were identified. Due to the often close proximity to the inner-segment mitochondria, they may, too, play a role in the inner-segment mitochondrial arrangement as well as metabolite shuttling. OPA1 is an important factor in mitochondrial homeostasis, including cristae remodeling; therefore, we examined the photoreceptors of a heterozygous Opa1 knockout mouse model. The cristae structure in the Opa1+/− photoreceptors was not greatly affected, but the mitochondria were enlarged and had reduced alignment to neighboring inner-segment mitochondria. This indicates the importance of key regulators in maintaining this specialized photoreceptor mitochondrial arrangement

Highly efficient lead extraction from aqueous solutions using inorganic polymer foams derived from biomass fly ash and metakaolin

This work reports a simple and safe, but powerful, route to depollute lead-containing aqueous solutions. Inorganic polymer foams (cm-size) were used as bulk-type adsorbents. The influence of the specimens' porosity and activator molarity on the foams' physical properties and on their lead extraction ability was studied. Then, the best performing samples were deeply evaluated as lead adsorbents by studying the impact of pH, lead concentration, contact time, ionic strength and solution volume. Lead sorption kinetics is strongly affected by the pollutant concentration, pH and the solution ionic strength. Under the most favourable conditions the foams showed an impressive removal capacity (105.9 mg/g at pH 5, 23 °C, C0 = 800 ppm, deionised water), surpassing all other reported values on the use of bulk-type inorganic polymers. The foams’ lead uptake is 2.3 times higher than the previous best performing bulk-type specimens (mm-size spheres), and sorption is 12.5–15 times faster. The foams can be easily regenerated using mild acidic conditions, and then reused as adsorbent, suggesting that the main adsorption mechanism is ion exchange

Innovative application for bauxite residue: red mud-based inorganic polymer spheres as pH regulators

In this study, and for the first time, red mud (RM)-based geopolymer spheres were synthesised, with varying porosity and RM content, and then their use as pH regulators was evaluated. The aluminosilicate sources of these inorganic polymers were 100% waste-based, consisting of a mixture of RM and fly ash wastes. Geopolymer spheres containing up to 60 wt.% RM were successfully produced, while higher RM contents distorted the specimens' spherical shape. Results showed that alkalis leaching from the spheres over time can be controlled by their porosity, while the RM content induces only minor changes to leaching. The RM-based spheres leached up to 0.0237 mol/dm3g of OH- ions from their structure, this being among the highest values ever reported for geopolymers. This allowed a continuous and prolonged pH buffer capacity with narrow pH decay over the 28 days (2.4 pH units), suggesting the use of the RM-based spheres as pH buffering materials in wastewater treatment and anaerobic digestion systems.publishe

Macular Vascular Imaging and Connectivity Analysis Using High-Resolution Optical Coherence Tomography

Purpose: To characterize macular blood flow connectivity in vivo using high-resolution perifoveal High Res OCT raster scans were performed on healthy participants. To mitigate the limitations of projection-resolved OCT-angiography, flow and structural data were used to observe the vascular structures of the superficial vascular complex (SVC) and the deep vascular complex. Vascular segmentation and rendering were performed using Imaris 9.5 software. Inflow and outflow patterns were classified according to vascular diameter and branching order from superficial arteries and veins, respectively. Results: Eight eyes from eight participants were included in this analysis, from which 422 inflow and 459 outflow connections were characterized. Arteries had direct arteriolar connections to the SVC (78%) and to the intermediate capillary plexus (ICP, 22%). Deep capillary plexus (DCP) inflow derived from small-diameter vessels succeeding ICP arterioles. The most prevalent outflow pathways coursed through superficial draining venules (74%). DCP draining venules ordinarily merged with ICP draining venules and drained independently of superficial venules in 21% of cases. The morphology of DCP draining venules in structural HighRes OCT is distinct from other vessels crossing the inner nuclear layer and can be used to identify superficial veins. Conclusions: Vascular connectivity analysis supports a hybrid circuitry of blood flow within the human parafoveal macula. Translational Relevance: Characterization of parafoveal macular blood flow connectivity in vivo using a precise segmentation of HighRes OCT is consistent with ground-truth microscopy studies and shows a hybrid circuitry. © 2022 The Authors

In-depth investigation of the long-term strength and leaching behaviour of inorganic polymer mortars containing green liquor dregs

Green liquor dregs are the most challenging waste stream coming from the pulp and paper industry. Despite tremendous efforts, there are not currently any viable recycling alternatives for this massively produced waste (2 Mt/year), which inevitably ends up in landfills. Urgent actions must be undertaken to tackle this. In this work, a substantial amount of dregs was incorporated into eco-friendly, waste-based inorganic polymer (geopolymer) mortars as fine filler. Then, and for the first time, the long-term strength performance (up to 270 days) and heavy metals leaching behaviour of the dregs-containing mortars was evaluated. The effect of the mixture composition and dregs incorporation content on the fresh- and hardened-state properties of the mortars was also studied. Dregs were found to increase the initial and final setting time of the slurries, thus extending the open time before their in-situ application. The use of dregs as fine filler effectively enhances the compressive strength of the mortars, and decreases their water absorption levels. These eco-friendly building materials showed excellent long-term performance, as their strength continuously increases up to the 270th day (after mixture), and no signs of efflorescence formation were detected. Moreover, the heavy metals leaching levels of the mortars were well below the contamination limits in soil, which demonstrates the feasibility of this recycling methodology.publishe

Synthesis of red mud derived M-type barium hexaferrites with tuneable coercivity

Hexagonal ferrites can be employed in a multitude of applications, the most common hexaferrites are the M ferrites such as BaFe12O19 (barium hexaferrite, BaM). It is known that if Fe3+ is substituted with a combination of Ti4+/Co2+ the coercivity of BaM can be reduced to produce soft M ferrites with easily switchable magnetisation. They can be utilised as powders, films or bulk ceramics, and can be manufactured from a wide variety of synthesis methods. The production of hexaferrites usually requires commercial raw materials, but if an industrial waste can be utilised, this will help to ease waste disposal and storage costs, valorise a waste material and encourage circular economy. In this study, bauxite residue (red mud) from the production of alumina was used to synthesise M-type hexaferrites, using a simple ceramic process. BaCO3, or BaCO3+Co3O4, were added to the red mud, blended and heated at 1000 °C to produce the M-type hexaferrites. Without cobalt addition up to 81.1 wt% M ferrite was produced, and with Co addition up to 74.3 wt% M ferrite was formed. Without cobalt, the M ferrite phase closely resembled BaFe9Al3O19, and was a hard ferrite with a magnetisation of 12–19 A m2/kg for the whole powder (up to 23.6 A m2/kg for the M ferrite phase) and a coercivity of ~290 kA/m. When cobalt was added, secondary titanate phases vanished, and Ti4+/Co2+ partially substituted very soft M ferrite was formed with a low coercivity of ~16 kA/m but a higher magnetisation of 24.5 A m2/kg for the whole powder (up to 34.9 A m2/kg for the M ferrite phase). Therefore, not only can good quality magnetic materials be easily produced from this common waste material, but its magnetic properties can be tuned by varying the 2 + ions added during the process