The effect of rib attachment properties on structural acoustics

Sound Pressure measurements were taken of several 2.44m long thin beams which had 0.635cm wide t-ribs centered on them. The beams were excited by a chirp signal with the frequency range of 500Hz to 1500Hz. Two rib attachment methods were used on the beams. One group of beams were machined out of thick stock to the geometry of a rib welded to a beam to ensure that the rib and attachment were one continuous media. The other group of beams had ribs that were welded on. Fillets from the welding process were subjected to heat-treatment and machining to determine the effect of static stress in fillets. Farfield sound radiation from the beam and phase speeds of waves propagating through the beam were used to investigate the effects of the rib and its attachment properties on the beam response;The experimental results showed that the geometry and stress state of the attachment are the main parameters that alter wave propagation and sound radiation. Also, the maximum sound radiation from the rib was not centered directly over the rib, but rather ahead of the rib location. Furthermore, substantial phase speed increases were observed around the shaker location and the rib location;Attachment geometry and stress information were incorporated into a Euler-Bernoulli wave-based model. This wave-based model reproduced the static stress effect on the farfield sound radiation, but didn\u27t reproduce the position of the sound radiation from the rib nor the experimental phase speed increases around the shaker or rib locations;An energy-based model was derived that included the geometry of the rib and attachment. The model used the Extended Hamilton\u27s Principle. Cubic spline weighting functions were applied via Galerkin\u27s method of weighted residuals. This energy-based model did reproduce both the position and the magnitude of the peak in the sound radiation field from the rib. It also reproduced the phase speed increases around the shaker and the rib locations

Generalized optical theorem for reflection, transmission, and extinction of power for scalar fields

We present a derivation of the optical theorem that makes it possible to obtain expressions for the extinguished power in a very general class of problems not previously treated. The results are applied to the analysis of the extinction of power by a scatterer in the presence of a lossless half space. Applications to microscopy and tomography are discussed

Clausius-Mossotti Relation Revisited: Media with Electric and Magnetic Response

A reexamination of the Clausius-Mossotti relation in which material with both electric and magnetic responses yields surprising results. Materials with indices near zero and with real parts less than zero, that is the real part of both the permeability and permittivity are negative, are found to emerge from the interaction of electric and magnetic responses in a self-consistent theory. The new results point the way to artificial and natural materials with exotic responses. A simulation with 10^10 particles shows good agreement with the analytical results

Near-Field Scanning Optical Tomography: A Nondestructive Method for Three-Dimensional Nanoscale Imaging

We present the theoretical foundation for near-field scanning optical tomography, a method for three-dimensional optical imaging with subwavelength resolution. An analysis of the forward problem for both scalar and vector optical fields is described. This is followed by the construction of the pseudoinverse solution to the linearized inverse scattering problem. The results are illustrated by numerical simulations

Strong Tip Effects in Near-field Scanning Optical Tomography

A model for the interaction of the scanning probe in near-field scanning optical microscopy is presented. Multiple scattering of the illuminating field with the probe is taken into account. The implications of this so-called strong tip model for the solution of the associated inverse scattering problem are studied through simulations