Quantification of bone strength by intraoperative torque measurement: a technical note

Introduction: Bone strength describes the resistance of bone against mechanical failure. Bone strength depends on both the amount of bone and the bone's quality, and the bone strength may be looked upon as a relevant parameter to judge an osteosynthesis' stability. Information about bone strength was barely available intraoperatively in the past. The previous work of our group reported on development and laboratory evaluation of mechanical torque measurement as a method for the intraoperative quantification of bone strength. With the clinical series presented here we intend to verify that the im gesamten Text DensiProbe™ instrumentation for intraoperative torque measurement and the related measurement method are eligible for intraoperative use based on the following criteria: application of the method may not create complications, the measurement can be performed by the surgeon himself and may only cause a limited increase in the procedure time. Patients and methods: From December 2006 until May 2007 ten patients with a pertrochanteric femoral fracture or a lateral femoral neck fracture eligible for stabilization with DHS® were included in the study after having received informed consent. Any medication and comorbidity that might have influenced bone quality or bone mineral density (BMD) in these patients was documented. Bone strength was intraoperatively measured with DensiProbe®. Complications that were obviously related with torque measurement were documented as well as any deviation from the suggested procedure; 6 and 12 weeks postoperative follow-up included clinical and radiological examination. The time required for torque measurement, the overall operating time and the number of persons present in the operating room were protocolled. BMD values of the contralateral femoral neck were postoperatively assessed by dual energy X-ray absorptiometry (DEXA) and compared to intraoperative peak torque values measured by DensiProbe®. Results: No major complication was observed during intraoperative application of DensiProbe®by trained surgeons. The unintended extraction of the guide wire together with the torque measurement probe was reported only once and is looked upon as a minor complication. Fracture healing was uneventful in all patients. The mean time for torque measurement was 2.35±0.9min accounting for 2.2±1.1% of total surgery time. The presence of an additional person was not required to perform torque measurement but to protocol the data. There was a tendency towards correlation between BMD values of the femoral neck and intraoperative peak torque values. Discussion: The data presented clearly indicate that the DensiProbe® instrumentation and measurement principle are eligible for routine intraoperative use by trained surgeons. Interpretation of possible correlations between BMD values measured by means of DEXA and the Peak Torque values assessed by DensiProbe® has to be considered very carefully, because BMD and Peak Torque analyse bone at a different scale. Only within the framework of a multicenter study it will be possible to include a sufficient number of patients for calculation of the methods' predictive value towards implant failure and to verify acceptance of the method by the surgeon

Passive Pneumatic Stabilization Device for Assisting in Reduction of Femoral Shaft Fractures

During treatment of femoral shaft fractures, not only the actual fracture reduction but also the retention of the achieved reduction is essential. Substantial forces may apply to the bone fragments, due to multidirectional muscular contraction. Furthermore, forces from manipulation of one bone fragment may be transferred over the soft tissues onto the other fragments, thus hindering accurate fracture reduction. Once a sufficient reduction has been achieved, this position must be retained whilst definitive internal fixation is performed. Conventional methods comprise mounting patients on a traction table and applying manual distraction or employing special distraction devices, such as the AO distractor device. These approaches, however, only insufficiently stabilize both main fragments. For example, on the traction table the proximal femoral fragment can pivot around the hip joint thus complicating precise reduction. A novel pneumatic stabilization device to assist surgeons during operative procedures is described. This passive holding device "Passhold” connects to one main fragment through a minimally invasive bone interface and statically locks the fragment's position. Thereafter, only the other main fragment is manipulated to achieve reduction. Mutual interference of the reciprocal fragment positions, due to soft-tissue force transfer during manipulation, is avoided. The authors examined the stability of the novel retention device on a test rig and proved its functionality under sterile settings using cadaver tests. It is concluded that this device largely facilitates the operative procedure in femoral shaft fractures, is sufficiently stable and ergonomically suitable for intraoperative deploymen

Quantitative Metabolomics Reveals an Epigenetic Blueprint for Iron Acquisition in Uropathogenic Escherichia coli

Bacterial pathogens are frequently distinguished by the presence of acquired genes associated with iron acquisition. The presence of specific siderophore receptor genes, however, does not reliably predict activity of the complex protein assemblies involved in synthesis and transport of these secondary metabolites. Here, we have developed a novel quantitative metabolomic approach based on stable isotope dilution to compare the complement of siderophores produced by Escherichia coli strains associated with intestinal colonization or urinary tract disease. Because uropathogenic E. coli are believed to reside in the gut microbiome prior to infection, we compared siderophore production between urinary and rectal isolates within individual patients with recurrent UTI. While all strains produced enterobactin, strong preferential expression of the siderophores yersiniabactin and salmochelin was observed among urinary strains. Conventional PCR genotyping of siderophore receptors was often insensitive to these differences. A linearized enterobactin siderophore was also identified as a product of strains with an active salmochelin gene cluster. These findings argue that qualitative and quantitative epi-genetic optimization occurs in the E. coli secondary metabolome among human uropathogens. Because the virulence-associated biosynthetic pathways are distinct from those associated with rectal colonization, these results suggest strategies for virulence-targeted therapies

Fixation principles in metaphyseal bone - A patent based review

ISSN:0937-941XISSN:1433-2965ISSN:0936-655

Biphasic plating – In vivo study of a novel fixation concept to enhance mechanobiological fracture healing

Background: Fracture fixation has advanced significantly with the introduction of locked plating and minimally invasive surgical techniques. However, healing complications occur in up to 10% of cases, of which a significant portion may be attributed to unfavorable mechanical conditions at the fracture. Moreover, state-of-the-art plates are prone to failure from excessive loading or fatigue. A novel biphasic plating concept has been developed to create reliable mechanical conditions for timely bone healing and simultaneously improve implant strength. This paper introduces the novel fixation concept and presents preclinical results from a large animal study. Methods: Twenty-four sheep underwent a mid-diaphyseal osteotomy stabilized with either the novel biphasic plate fixator or a control locking plate. Different fracture patterns regarding orientation and localization were investigated. Animals were free to fully bear weight during the post-operative period. After 12 weeks, the healing fractures were evaluated for bone formation using micro-computer tomography and strength and stiffness using biomechanical testing. Additionally, histological evaluation of soft tissue samples with respect to metal wear debris was performed. Results: No plate deformation or failures were observed under full weight bearing with the biphasic plate. Defects stabilized with the biphasic plate demonstrated robust callus formation compared to control group. Torsion tests after plate removal revealed no statistical difference in peak torsion to failure and stiffness for the different fracture patterns stabilized with the biphasic plate. However, the biphasic plate group specimens were 45% stronger (p=0.002) and 48% stiffer (p=0.007) than the controls. No histological signs of metal wear due to the biphasic feature could be found. Conclusions: The biphasic plate concept is aimed at improving the biomechanics of locked plating. The results of this large animal study demonstrate the feasibility and clinical potential of this novel stabilization concept.</p

DensiProbe Spine: an intraoperative measurement of bone quality in spinal instrumentation. A clinical feasibility study

BACKGROUND CONTEXT A new device, DensiProbe, has been developed to provide surgeons with intraoperative information about bone strength by measuring the peak breakaway torque. In cases of low bone quality, the treatment can be adapted to the patient's condition, for example, by improving screw-anchorage with augmentation techniques. PURPOSE The objective of this study was to investigate the feasibility of DensiProbe Spine in patients undergoing transpedicular fixation. STUDY DESIGN Prospective feasibility study on consecutive patients. PATIENT SAMPLE Fourteen women and 16 men were included in this study. OUTCOME MEASURES Local and general bone quality. METHODS These consecutive patients scheduled for transpedicular fixation were evaluated for bone mineral density (BMD), which was measured globally by dual-energy X-ray absorptiometry and locally via biopsies using quantitative microcomputed tomography. The breakaway torque force within the vertebral body was assessed intraoperatively via the transpedicular approach with the DensiProbe Spine. The results were correlated with the areal BMD at the lumbar spine and the local volumetric BMD (vBMD) and a subjective impression of bone strength. The feasibility of the method was evaluated, and the clinical and radiological performance was evaluated over a 1-year follow-up. This study was funded by an AO Spine research grant; DensiProbe was developed at the AO Research Institute Davos, Switzerland; the AO Foundation is owner of the intellectual property rights. RESULTS In 30 patients, 69 vertebral levels were examined. The breakaway torque consistently correlated with an experienced surgeon's quantified impression of resistance as well as with vBMD of the same vertebra. Beyond a marginal prolongation of surgery time, no adverse events related to the usage of the device were observed. CONCLUSIONS The intraoperative transpedicular measurement of the peak breakaway torque was technically feasible, safe, and reliably predictive of local vBMD during dorsal spinal instrumentations in a clinical setting. Larger studies are needed to define specific thresholds that indicate a need for the augmentation or instrumentation of additional levels

Biphasic plating improves the mechanical performance of locked plating for distal femur fractures

Internal fixation by plate osteosynthesis is the gold standard treatment for distal femur fractures. Despite improvements that preserve the biological conditions for bone healing, there are concerns standard locked plating constructs may be overly stiff. Biphasic plating is a novel concept designed to provide suitable fracture motion and increased implant strength to support early full weight-bearing. This study aims to demonstrate that the Biphasic Plate can be incorporated into a pre-contoured distal femur plate while providing adequate flexibility and increased implant strength. The mechanical performance of the Biphasic Plate (BP) was investigated in comparison to a standard locking plate for the distal femur (LCP-DF). Constructs were formed by mounting the implants on a bone substitute. The construct stiffness and strength under axial loading and the magnitude of interfragmentary movement were determined using finite element analysis. The Biphasic Plate exhibited a bi-linear stiffness response; at low loads, the BP construct was 55% more compliant and at high loads 476% stiffer than the LCP-DF. The Biphasic Plate provided more consistent interfragmentary movement over a wider loading range. At partial weight-bearing loads, the Biphasic Plate produced larger interfragmentary movements (0.18 vs. 0.04 mm). However, at loads equivalent to full weight-bearing, the maximum movements were substantially smaller than the LCP-DF construct (1.5 vs. 3.5 mm). The increased flexibility at low loads was provided without sacrificing implant strength with peak stress in the Biphasic Plate 63% lower than the LCP-DF construct. The biphasic plating concept can be successfully incorporated into anatomically contoured distal femur plates while providing adequate flexibility and increasing implant strength.</p

Assessment of the Breakaway Torque at the Posterior Pelvic Ring in Human Cadavers

PURPOSE To enhance the diminished screw purchase in cancellous, osteoporotic bone following the fixation of posterior pelvic ring injuries by iliosacral screws an increased bone-implant contact area using modificated screws, techniques or bone cement may become necessary. The aim of the study was to identify sites within the pathway of iliosacral screws requiring modifications of the local bone or the design of instrumentations placed at this site. MATERIALS AND METHODS The breakaway torque was measured mechanically at the iliosacral joint ("ISJ"), the sacral lateral mass ("SLM") and the center of the S1 ("CS1"), at a superior and an inferior site under fluoroscopic control on five human cadaveric specimens (3 female; mean age 87 years, range: 76-99) using the DensiProbe™Spine device. RESULTS The measured median (range) breakaway torque was 0.63 Nm (0.31-2.52) at the "iliosacral joint", 0.14 Nm (0.05-1.22) at the "sacral lateral mass", 0.57 Nm (0.05-1.42) at the "S1 center." The "sacral lateral mass" breakaway torque was lower than compared to that at the "iliosacral joint" (p < .001) or "S1 center" (p < .001). The median (range) breakaway torque measured at all superior measurement points was 0.52 Nm (0.10-2.52), and 0.48 Nm (0.05-1.18) at all inferior sites. The observed difference was statistically significant (p < .05). CONCLUSIONS The lateral mass of the sacrum provides the lowest bone quality for implant anchorage. Iliosacral screws should be placed as superior as safely possible, should bridge the iliosacral joint and may allow for cement application at the lateral mass of the sacrum through perforations

Passive Pneumatic Stabilization Device for Assisting in Reduction of Femoral Shaft Fractures

During treatment of femoral shaft fractures, not only the actual fracture reduction but also the retention of the achieved reduction is essential. Substantial forces may apply to the bone fragments, due to multidirectional muscular contraction. Furthermore, forces from manipulation of one bone fragment may be transferred over the soft tissues onto the other fragments, thus hindering accurate fracture reduction. Once a sufficient reduction has been achieved, this position must be retained whilst definitive internal fixation is performed. Conventional methods comprise mounting patients on a traction table and applying manual distraction or employing special distraction devices, such as the AO distractor device. These approaches, however, only insufficiently stabilize both main fragments. For example, on the traction table the proximal femoral fragment can pivot around the hip joint thus complicating precise reduction. A novel pneumatic stabilization device to assist surgeons during operative procedures is described. This passive holding device "Passhold” connects to one main fragment through a minimally invasive bone interface and statically locks the fragment's position. Thereafter, only the other main fragment is manipulated to achieve reduction. Mutual interference of the reciprocal fragment positions, due to soft-tissue force transfer during manipulation, is avoided. The authors examined the stability of the novel retention device on a test rig and proved its functionality under sterile settings using cadaver tests. It is concluded that this device largely facilitates the operative procedure in femoral shaft fractures, is sufficiently stable and ergonomically suitable for intraoperative deploymen