1,825 research outputs found
Biomechanical evaluation of combined short segment fixation and augmentation of incomplete osteoporotic burst fractures
Background: Treating traumatic fractures in osteoporosis is challenging. Multiple clinical treatment options are found in literature. Augmentation techniques are promising to reduce treatment-related morbidity. In recent years, there have been an increasing number of reports about extended indication for augmentation techniques. However, biomechanical evaluations of these techniques are limited. Methods: Nine thoracolumbar osteoporotic spinal samples (4 FSU) were harvested from postmortem donors and immediately frozen. Biomechanical testing was performed by a robotic-based spine tester. Standardized incomplete burst fractures were created by a combination of osteotomy-like weakening and high velocity compression using a hydraulic material testing apparatus. Biomechanical measurements were performed on specimens in the following conditions: 1) intact, 2) fractured, 3) bisegmental instrumented, 4) bisegmental instrumented with vertebroplasty (hybrid augmentation, HA) and 5) stand-alone vertebroplasty (VP). The range of motion (RoM), neutral zone (NZ), elastic zone (EZ) and stiffness parameters were determined. Statistical evaluation was performed using Wilcoxon signed-rank test for paired samples (p = 0.05). Results: Significant increases in RoM and in the NZ and EZ (p < 0.005) were observed after fracture production. The RoM was decreased significantly by applying the dorsal bisegmental instrumentation to the fractured specimens (p < 0.005). VP reduced fractured RoM in flexion but was still increased significantly (p < 0.05) above intact kinematic values. NZ stiffness (p < 0.05) and EZ stiffness (p < 0.01) was increased by VP but remained lower than prefracture values. The combination of short segment instrumentation and vertebroplasty (HA) showed no significant changes in RoM and stiffness in NZ in comparison to the instrumented group, except for significant increase of EZ stiffness in flexion (p < 0.05). Conclusions: Stand-alone vertebroplasty (VP) showed some degree of support of the anterior column but was accompanied by persistent traumatic instability. Therefore, we would advocate against using VP as a stand-alone procedure in traumatic fractures. HA did not increase primary stability of short segment instrumentation. Some additional support of anterior column and changes of kinematic values of the EZ may lead one to suppose that additive augmentation may reduce the load of dorsal implants and possibly reduce the risk of implant failure.<br
Long-Chain and Very Long-Chain Ceramides Mediate Doxorubicin-Induced Toxicity and Fibrosis
Doxorubicin (Dox) is a chemotherapeutic agent with cardiotoxicity associated with profibrotic effects. Dox increases ceramide levels with pro-inflammatory effects, cell death, and fibrosis. The purpose of our study was to identify the underlying ceramide signaling pathways. We aimed to characterize the downstream effects on cell survival, metabolism, and fibrosis. Human fibroblasts (hFSF) were treated with 0.7 µM of Dox or transgenically overexpressed ceramide synthase 2 (FLAG-CerS2). Furthermore, cells were pre-treated with MitoTempo (MT) (2 h, 20 µM) or Fumonisin B1 (FuB) (4 h, 100 µM). Protein expression was measured by Western blot or immunofluorescence (IF). Ceramide levels were determined with mass spectroscopy (MS). Visualizations were conducted using laser scanning microscopy (LSM) or electron microscopy. Mitochondrial activity was measured using seahorse analysis. Dox and CerS2 overexpression increased CerS2 protein expression. Coherently, ceramides were elevated with the highest peak for C24:0. Ceramide- induced mitochondrial ROS production was reduced with MT or FuB preincubation. Mitochondrial homeostasis was reduced and accompanied by reduced ATP production. Our data show that the increase in pro-inflammatory ceramides is an essential contributor to Dox side-effects. The accumulation of ceramides resulted in a lipotoxic shift and subsequently mitochondrial structural and functional damage, which was partially reversible following inhibition of ceramide synthesis
The probiotic Escherichia coli strain Nissle 1917 (EcN) stops acute diarrhoea in infants and toddlers
In most cases, acute diarrhoea will become self-limiting during the first few days after onset. For young children, however, health risks may develop when the disease lasts longer than 3 days. The purpose of the present trial was to determine whether the stool frequency of infants and toddlers suffering from acute diarrhoea could be normalised more quickly by administering the probiotic Escherichia coli Nissle 1917 (EcN) solution than by administering a placebo. The safety of EcN were also assessed. A total of 113 children (aged 2–47 months) with acute diarrhoea (> three watery or loose stools in 24 h) were randomised to either a group receiving the probiotic EcN suspension (n = 55) or a group receiving the placebo suspension (n = 58) in a confirmative, double-blind clinical trial. Depending on the age of patients, 1–3 ml per day of verum suspension (10(8) viable EcN cells per millilitre) or placebo were administered orally. The causes of the diarrhoea were viral rather than bacterial, but they were mainly unspecific infections. The median onset of treatment response (reduction of daily stool frequency to ≤ three watery or loose stools over at least 2 consecutive days) occurred more rapidly in the children receiving the EcN solution (2.5 days) than in those receiving the placebo (4.8 days), a significant difference (2.3 days; p = 0.0007). The number of patients showing a response was clearly higher (p < 0.0001) in the EcN group (52/55; 94.5%) than in the placebo group (39/58; 67.2%). EcN was found to be safe and well-tolerated, and it showed a significant superiority compared to the placebo in the treatment of acute diarrhoea in infants and toddlers. ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (doi:http://dx.doi.org/10.1007/s00431-007-0419-x) contains supplementary material, which is available to authorized users
Diffraction of complex molecules by structures made of light
We demonstrate that structures made of light can be used to coherently
control the motion of complex molecules. In particular, we show diffraction of
the fullerenes C60 and C70 at a thin grating based on a standing light wave. We
prove experimentally that the principles of this effect, well known from atom
optics, can be successfully extended to massive and large molecules which are
internally in a thermodynamic mixed state and which do not exhibit narrow
optical resonances. Our results will be important for the observation of
quantum interference with even larger and more complex objects.Comment: 4 pages, 3 figure
Experimentally induced incomplete burst fractures - a novel technique for calf and human specimens
Background: Fracture morphology is crucial for the clinical decision-making process preceding spinal fracture treatment. The presented experimental approach was designed in order to ensure reproducibility of induced fracture morphology.
Results: The presented method resulted in fracture morphology, found in clinical classification systems like the Magerl classification. In the calf spine samples, 70% displayed incomplete burst fractures corresponding to type A3.1 and A3.2 fractures. In all human samples, superior incomplete burst fractures (Magerl A3.1) were identified by an independent radiologist and spine surgeon.
Conclusions: The presented set up enables the first experimental means to reliably model and study distinct incomplete burst fracture patterns in an in vitro setting. Thus, we envisage this protocol to facilitate further studies on spine fracture treatment of incomplete burst fractures
Logarithmic electroweak corrections to hadronic Z+1 jet production at large transverse momentum
We consider hadronic production of a Z boson in association with a jet and
study one- and two-loop electroweak logarithmic corrections in the region of
high Z-boson transverse momentum, p_T >> M_Z, including leading and
next-to-leading logarithms. Numerical results for the LHC and Tevatron
colliders are presented. At the LHC these corrections amount to tens of per
cent and will be important for interpretation of the measurements.Comment: 10 pages, 4 figures; one reference added; minor improvements.
Accepted for publication in Phys. Lett.
A Comparison of the Composition of Planets in Single- and Multi-Planet Systems Orbiting M dwarfs
We investigate and compare the composition of M-dwarf planets in systems with
only one known planet (``singles") to those residing in multi-planet systems
(``multis") and the fundamental properties of their host stars. We restrict our
analysis to planets with directly measured masses and radii, which comprise a
total of 70 planets: 30 singles and 40 multis in 19 systems. We compare the
bulk densities for the full sample, which includes planets ranging in size from
to , and find that single planets have
significantly lower densities on average than multis, which we cannot attribute
to selection biases. We compare the bulk densities normalized by an Earth model
for planets with , and find that multis are also denser
with 99\% confidence. We calculate and compare the core/water mass fractions
(CMF/WMF) of low-mass planets (), and find that the likely
rocky multis (with ) have lower CMFs than singles. We also
compare the [Fe/H] metallicity and rotation period of all single versus
multi-planet host stars with such measurements in the literature and find that
multi-planet hosts are significantly more metal-poor than those hosting a
single planet. Moreover, we find that host star metallicity decreases with
increasing planet multiplicity. In contrast, we find only a modest difference
in the rotation period. The significant differences in planetary composition
and metallicity of the host stars point to different physical processes
governing the formation of single- and multi-planet systems in M dwarfs.Comment: 20 pages, 11 figures, 2 tables. Submitted to ApJ and under review.
Comments welcome
Comparison of Relativistic Nucleon-Nucleon Interactions
We investigate the difference between those relativistic models based on
interpreting a realistic nucleon-nucleon interaction as a perturbation of the
square of a relativistic mass operator and those models that use the method of
Kamada and Gl\"ockle to construct an equivalent interaction to add to the
relativistic mass operator. Although both models reproduce the phase shifts and
binding energy of the corresponding non-relativistic model, they are not
scattering equivalent. The example of elastic electron-deuteron scattering in
the one-photon-exchange approximation is used to study the sensitivity of
three-body observables to these choices. Our conclusion is that the differences
in the predictions of the two models can be understood in terms of the
different ways in which the relativistic and non-relativistic -matrices are
related. We argue that the mass squared method is consistent with conventional
procedures used to fit the Lorentz-invariant cross section as a function of the
laboratory energy.Comment: Revtex 13 pages, 5 figures, corrected some typo
Continuous loading of a magnetic trap
We have realized a scheme for continuous loading of a magnetic trap (MT).
^{52}Cr atoms are continuously captured and cooled in a magneto-optical trap
(MOT). Optical pumping to a metastable state decouples atoms from the cooling
light. Due to their high magnetic moment (6 Bohr magnetons), low-field seeking
metastable atoms are trapped in the magnetic quadrupole field provided by the
MOT. Limited by inelastic collisions between atoms in the MOT and in the MT, we
load 10^8 metastable atoms at a rate of 10^8 atoms/s below 100 microkelvin into
the MT. After loading we can perform optical repumping to realize a MT of
ground state chromium atoms.Comment: 4 pages, 4 figures, version 2, modified references, included
additional detailed information, minor changes in figure 3 and in tex
- …