Laboratory calibration of AAFE radiometer/scatterometer (RADSCAT)

A brief description of the electrical and mechanical instrument configuration, followed by an extensive discussion of laboratory tests and results are contained herein. This information is required to provide parameters for data reduction, and a basis for analysis of the measurement errors in data taken with this instrument

Flight measurement and analysis of AAFE RADSCAT wind speed signature of the ocean

The advanced aerospace flight experiment radiometer scatterometer (AAFE RADSCAT) which was developed as a research tool to evaluate the use of microwave frequency remote sensors to provide wind speed information at the ocean surface is discussed. The AAFE RADSCAT helped establish the feasibility of the satellite scatterometer for measuring both wind speed and direction. The most important function of the AAFE RADSCAT was to provide a data base of ocean normalized radar cross section (NRCS) measurements as a function of surface wind vector at 13.9 GHz. The NRCS measurements over a wide parametric range of incidence angles, azimuth angles, and winds were obtained in a series of RADSCAT aircraft missions. The obtained data base was used to model the relationship between k sub u band radar signature and ocean surface wind vector. The models developed therefrom are compared with those used for inversion of the SEASAT-A satellite scatterometer (SASS) radar measurements to wind speeds

SEASAT: A satellite scatterometer illumination times of selected in situ sites

A list of times that the SEASAT A Satellite Scatterometer (SASS) illuminated from directly above or directly abeam, selected surface sites where in situ winds were measured is provided. The list is ordered by the Greenwich Mean Time (GMT) of the midpoint of the illumination period (hit time) for a given surface site. The site identification, the orbit number and the direction from the subtrack in which the truth lies are provided. The accuracy of these times depends in part upon the ascending node times, which are estimated to be within +.1 sec, and on the illumination time relative to the ascending node, which is estimated to be within +6 seconds. The uncertainties in the times provided were judged to be sufficiently small to allow efficient and accurate extraction of SASS and in situ data at the selected surface sites. The list contains approximately six thousand hit times from 61 geographically dispersed sites

An operational satellite scatterometer for wind vector measurements over the ocean

Performance requirements and design characteristics of a microwave scatterometer wind sensor for measuring surface winds over the oceans on a global basis are described. Scatterometer specifications are developed from user requirements of wind vector measurement range and accuracy, swath width, resolution cell size and measurement grid spacing. A detailed analysis is performed for a baseline fan-beam scatterometer design, and its performance capabilities for meeting the SeaSat-A user requirements. Various modes of operation are discussed which will allow the resolution of questions concerning the effects of sea state on the scatterometer wind sensing ability and to verify design boundaries of the instrument

Probabilistic models to describe the dynamics of migrating microbial communities

In all but the most sterile environments bacteria will reside in fluid being transported through conduits and some of these will attach and grow as biofilms on the conduit walls. The concentration and diversity of bacteria in the fluid at the point of delivery will be a mix of those when it entered the conduit and those that have become entrained into the flow due to seeding from biofilms. Examples include fluids through conduits such as drinking water pipe networks, endotracheal tubes, catheters and ventilation systems. Here we present two probabilistic models to describe changes in the composition of bulk fluid microbial communities as they are transported through a conduit whilst exposed to biofilm communities. The first (discrete) model simulates absolute numbers of individual cells, whereas the other (continuous) model simulates the relative abundance of taxa in the bulk fluid. The discrete model is founded on a birth-death process whereby the community changes one individual at a time and the numbers of cells in the system can vary. The continuous model is a stochastic differential equation derived from the discrete model and can also accommodate changes in the carrying capacity of the bulk fluid. These models provide a novel Lagrangian framework to investigate and predict the dynamics of migrating microbial communities. In this paper we compare the two models, discuss their merits, possible applications and present simulation results in the context of drinking water distribution systems. Our results provide novel insight into the effects of stochastic dynamics on the composition of non-stationary microbial communities that are exposed to biofilms and provides a new avenue for modelling microbial dynamics in systems where fluids are being transported

Color television study Final report, Nov. 1965 - Mar. 1966

Color television camera for transmission from lunar and earth orbits and lunar surfac

Creating an Ethical Awareness Using the Internet

Information access via the Internet becomes easier, more information becomes available, and more people access that information. Almost daily there are newspaper articles describing security breaches, viruses or other questionable behavior on the Internet. Therefore, the Information Superhighway provides opportunities that have not been previously addressed either legally or ethically. Information Systems (IS) students must not only learn technology and its uses, but must address the social and ethical issues that constantly arise. This paper uses the Internet to develop examples of ethical and legal issues the students face as they graduate into the business organization. A five step ethical analysis offers five moral dimensions of the information age - 1) Information Rights, 2) Property Rights, 3) Accountability, Liability and Control, 4) System Quality, 5) Quality of Life. These five themes encompass concerns often raised in discussions about ethics and information technology. Using these topics, some examples for integration of ethics throughout the undergraduate IS curriculum using the Internet, have been developed. These examples need not be limited to a specific IS course, but can be incorporated throughout the Information Systems undergraduate curriculum. Students need to develop an awareness of ethical issues surrounding emerging technologies

Ecumenical modal logic

The discussion about how to put together Gentzen's systems for classical and intuitionistic logic in a single unified system is back in fashion. Indeed, recently Prawitz and others have been discussing the so called Ecumenical Systems, where connectives from these logics can co-exist in peace. In Prawitz' system, the classical logician and the intuitionistic logician would share the universal quantifier, conjunction, negation, and the constant for the absurd, but they would each have their own existential quantifier, disjunction, and implication, with different meanings. Prawitz' main idea is that these different meanings are given by a semantical framework that can be accepted by both parties. In a recent work, Ecumenical sequent calculi and a nested system were presented, and some very interesting proof theoretical properties of the systems were established. In this work we extend Prawitz' Ecumenical idea to alethic K-modalities

Scaling of Local Slopes, Conservation Laws and Anomalous Roughening in Surface Growth

We argue that symmetries and conservation laws greatly restrict the form of the terms entering the long wavelength description of growth models exhibiting anomalous roughening. This is exploited to show by dynamic renormalization group arguments that intrinsic anomalous roughening cannot occur in local growth models. However some conserved dynamics may display super-roughening if a given type of terms are present.Comment: To appear in Phys. Rev. Lett., 4 pages in RevTeX style, no fig