最近の受入れ資料:平成12年度海事資料館入館者数

markdownabstractThe aim of this research was finding the influence of anatomy-based and functional-based outflow boundary conditions for computational fluid dynamics (CFD) on fractional flow reserve (FFR) and wall shear stress (WSS) in mildly diseased coronary bifurcations. For ten patient-specific bifurcations three simulations were set up with different outflow conditions, while the inflow was kept constant. First, the outflow conditions were based on the diameter of the outlets. Second, they were based on the volume estimates of the myocardium that depended on the outlets. Third, they were based on a myocardial flow measure derived from computed tomography perfusion imaging (CTP). The difference in outflow ratio between the perfusion-based and the diameter-based approach was -7 p.p. [-14 p.p.: 7 p.p.] (median percentage point and interquartiles), and between the perfusion-based and volume-based this was -2 p.p. [-2 p.p.: 1 p.p.]. Despite of these differences the computed FFRs matched very well. A quantitative analysis of the WSS results showed very high correlations between the methods with an r2 ranging from 0.90 to 1.00. But despite the high correlations the diameter-based and volume-based approach generally underestimated the WSS compared to the perfusion-based approach. These differences disappeared after normalization. We demonstrated the potential of CTP for setting patient-specific boundary conditions for atherosclerotic coronary bifurcations. FFR and normalized WSS were unaffected by the variations in outflow ratios. In order to compute absolute WSS a functional measure to set the outflow ratio might be of added value in this type of vessels

Contrast-enhanced micro-CT imaging in murine carotid arteries : a new protocol for computing wall shear stress

Background: Wall shear stress (WSS) is involved in the pathophysiology of atherosclerosis. The correlation between WSS and atherosclerosis can be investigated over time using a WSS-manipulated atherosclerotic mouse model. To determine WSS in vivo, detailed 3D geometry of the vessel network is required. However, a protocol to reconstruct 3D murine vasculature using this animal model is lacking. In this project, we evaluated the adequacy of eXIA 160, a small animal contrast agent, for assessing murine vascular network on micro-CT. Also, a protocol was established for vessel geometry segmentation and WSS analysis. Methods: A tapering cast was placed around the right common carotid artery (RCCA) of ApoE(-/-) mice (n = 8). Contrast-enhanced micro-CT was performed using eXIA 160. An innovative local threshold-based segmentation procedure was implemented to reconstruct 3D geometry of the RCCA. The reconstructed RCCA was compared to the vessel geometry using a global threshold-based segmentation method. Computational fluid dynamics was applied to compute the velocity field and WSS distribution along the RCCA. Results: eXIA 160-enhanced micro-CT allowed clear visualization and assessment of the RCCA in all eight animals. No adverse biological effects were observed from the use of eXIA 160. Segmentation using local threshold values generated more accurate RCCA geometry than the global threshold-based approach. Mouse-specific velocity data and the RCCA geometry generated 3D WSS maps with high resolution, enabling quantitative analysis of WSS. In all animals, we observed low WSS upstream of the cast. Downstream of the cast, asymmetric WSS patterns were revealed with variation in size and location between animals. Conclusions: eXIA 160 provided good contrast to reconstruct 3D vessel geometry and determine WSS patterns in the RCCA of the atherosclerotic mouse model. We established a novel local threshold-based segmentation protocol for RCCA reconstruction and WSS computation. The observed differences between animals indicate the necessity to use mouse-specific data for WSS analysis. For our future work, our protocol makes it possible to study in vivo WSS longitudinally over a growing plaque

Fast and Accurate Pressure-Drop Prediction in Straightened Atherosclerotic Coronary Arteries

Atherosclerotic disease progression in coronary arteries is influenced by wall shear stress. To compute patient-specific wall shear stress, computational fluid dynamics (CFD) is required. In this study we propose a method for computing the pressure-drop in regions

Contrast-enhanced micro-CT imaging in murine carotid arteries: A new protocol for computing wall shear stress

Background: Wall shear stress (WSS) is involved in the pathophysiology of atherosclerosis. The correlation between WSS and atherosclerosis can be investigated over time using a WSS-manipulated atheroscleroti

Limited wedge resection for T1 colon cancer (LIMERIC-II trial) - rationale and study protocol of a prospective multicenter clinical trial

BACKGROUND: The sole presence of deep submucosal invasion is shown to be associated with a limited risk of lymph node metastasis. This justifies a local excision of suspected deep submucosal invasive colon carcinomas (T1 CCs) as a first step treatment strategy. Recently Colonoscopy-Assisted Laparoscopic Wedge Resection (CAL-WR) has been shown to be able to resect pT1 CRCs with a high R0 resection rate, but the long term outcomes are lacking. The aim of this study is to evaluate the safety, effectiveness and long-term oncological outcomes of CAL-WR as primary treatment for patients with suspected superficial and also deeply-invasive T1 CCs. METHODS: In this prospective multicenter clinical trial, patients with a macroscopic and/or histologically suspected T1 CCs will receive CAL-WR as primary treatment in order to prevent unnecessary major surgery for low-risk T1 CCs. To make a CAL-WR technically feasible, the tumor may not include > 50% of the circumference and has to be localized at least 25 cm proximal from the anus. Also, there should be sufficient distance to the ileocecal valve to place a linear stapler. Before inclusion, all eligible patients will be assessed by an expert panel to confirm suspicion of T1 CC, estimate invasion depth and subsequent advise which local resection techniques are possible for removal of the lesion. The primary outcome of this study is the proportion of patients with pT1 CC that is curatively treated with CAL-WR only and in whom thus organ-preservation could be achieved. Secondary outcomes are 1) CAL-WR's technical success and R0 resection rate for T1 CC, 2) procedure-related morbidity and mortality, 3) 5-year overall and disease free survival, 4) 3-year metastasis free survival, 5) procedure-related costs and 6) impact on quality of life. A sample size of 143 patients was calculated. DISCUSSION: CAL-WR is a full-thickness local resection technique that could also be effective in removing pT1 colon cancer. With the lack of current endoscopic local resection techniques for > 15 mm pT1 CCs with deep submucosal invasion, CAL-WR could fill the gap between endoscopy and major oncologic surgery. The present study is the first to provide insight in the long-term oncological outcomes of CAL-WR. TRIAL REGISTRATION: CCMO register (ToetsingOnline), NL81497.075.22, protocol version 2.3 (October 2022)

Geometry-based pressure drop prediction in mildly diseased human coronary arteries

Pressure drop (Delta p) estimations in human coronary arteries have several important applications, including determination of appropriate boundary conditions for CFD and estimation of fractional flow reserve (FFR). In this study a Delta p prediction was made based on geometrical features derived from patient-specific imaging data. Twenty-two mildly diseased human coronary arteries were imaged with computed tomography and intravascular ultrasound. Each artery was modelled in three consecutive steps: from straight to tapered, to stenosed, to curved model. CFD was performed to compute the additional Delta p in each model under steady flow for a wide range of Reynolds numbers. The correlations between the added geometrical complexity and additional Delta p were used to compute a predicted Delta p. This predicted Delta p based on geometry was compared to CFD results. The mean Delta p calculated with CFD was 855 +/- 666 Pa. Tapering and curvature added significantly to the total Delta p, accounting for 31.4 +/- 19.0% and 18.0 +/- 10.9% respectively at Re = 250. Using tapering angle, maximum area stenosis and angularity of the centerline, we were able to generate a good estimate for the predicted Delta p with a low mean but high standard deviation, average error of 41.1 +/- 287.8 Pa at Re = 250. Furthermore, the predicted Delta p was used to accurately estimate FFR (r=0.93). The effect of the geometric features was determined and the pressure drop in mildly diseased human coronary arteries was predicted quickly based solely on geometry. This pressure drop estimation could serve as a boundary condition in CFD to model the impact of distal epicardial vessels. (C) 2014 Elsevier Ltd. All rights reserved

Geometry-based pressure drop prediction in mildly diseased human coronary arteries

Pressure drop (△. p) estimations in human coronary arteries have several important applications, including determination of appropriate boundary conditions for CFD and estimation of fractional flow reserve (FFR). In this study a △. p prediction was made based on geometrical features derived from patient-specific imaging data.Twenty-two mildly diseased human coronary arteries were imaged with computed tomography and intravascular ultrasound. Each artery was modelled in three consecutive steps: from straight to tapered, to stenosed, to curved model. CFD was performed to compute the additional △. p in each model under steady flow for a wide range of Reynolds numbers. The correlations between the added geometrical complexity and additional △. p were used to compute a predicted △. p. This predicted △. p based on geometry was compared to CFD results.The mean △. p calculated with CFD was 855±666. Pa. Tapering and curvature added significantly to the total △. p, accounting for 31.4±19.0% and 18.0±10.9% respectively at Re=250. Using tap