Moisture resistance of SU-8 and KMPR as structural material for integrated gaseous detectors

This paper treats the moisture resistance of SU-8 and KMPR, two photoresists considered as structural material in microsystems. Our experiments focus on the moisture resistance of newly developed radiation imaging detectors containing these resists. Since these microsystems will be used unpackaged, they are susceptible to all kinds of environmental conditions. Already after one day of exposure to a humid condition the structural integrity and adhesion of SU-8 structures, measured by a shear test is drastically reduced. KMPR photoresist shows much stronger moisture resistance properties, making it a suitable alternative in our application. © 2008 Elsevier Science. All rights reserved

An Initial study on The Reliability of Power Semiconductor Devices

An initial literature study combined with some basic comparative simulations has been performed on different electricfield modulation techniques and the subsequent reliability issues are reported for power semiconductor devices. An explanation of the most important power device metrics such as the offstate breakdown (BV) and specific on-resistance (RON) will be given, followed by a short overview of some of the electrostatic techniques (fieldplates, RESURF e.g. [1]) used to suppress peak electric fields. Furthermore it will be addressed that the high current operation of these devices results in shifting electric field peaks (Kirk effect [2], [3]) and as such different avalanche behavior, resulting in (gate oxide) reliability issues unlike those of conventional CMOS

Complex Scalar DM in a B-L Model

In this work, we implement a complex scalar Dark Matter (DM) candidate in a $U(1)_{B-L}$ gauge extension of the Standard Model. The model contains three right handed neutrinos with different quantum numbers and a rich scalar sector, with extra doublets and singlets. In principle, these extra scalars can have VEVs ($V_{\Phi}$ and $V_{\phi}$ for the extra doublets and singlets, respectively) belonging to different energy scales. In the context of $\zeta\equiv\frac{V_{\Phi}}{V_{\phi}}\ll1$, which allows to obtain naturally light active neutrino masses and mixing compatible with neutrino experiments, the DM candidate arises by imposing a $Z_{2}$ symmetry on a given complex singlet, $\phi_{2}$, in order to make it stable. After doing a study of the scalar potential and the gauge sector, we obtain all the DM dominant processes concerning the relic abundance and direct detection. Then, for a representative set of parameters, we found that a complex DM with mass around $200$ GeV, for example, is compatible with the current experimental constraints without resorting to resonances. However, additional compatible solutions with heavier masses can be found in vicinities of resonances. Finally, we address the issue of having a light CP-odd scalar in the model showing that it is safe concerning the Higgs and the $Z_{\mu}$ boson invisible decay widths, and also the energy loss in stars astrophysical constraints.Comment: 20 pages, 3 figure

Dose-dependent new bone formation by extracorporeal shock wave application on the intact femur of rabbits

Background: Whereas various molecular working mechanisms of shock waves have been demonstrated, no study has assessed in detail the influence of varying energy flux densities (EFD) on new bone formation in vivo. Methods: Thirty Chinchilla bastard rabbits were randomly assigned to 5 groups (EFD 0.0, 0.35, 0.5, 0.9 and 1.2 mJ/mm(2)) and treated with extracorporeal shock waves at the distal femoral region (1,500 pulses; 1 Hz frequency). To investigate new bone formation, animals were injected with oxytetracycline at days 5-9 after shock wave application and sacrificed on day 10. Histological sections of all animals were examined using broad-band epifluorescent illumination, contact microradiography and Giemsa-Eosin staining. Results: Application of shock waves induced new bone formation beginning with 0.5 mJ/mm(2) EFD and increasing with 0.9 mJ/mm(2) and 1.2 mJ/mm(2). The latter EFD resulted in new bone formation also on the dorsal cortical bone; cortical fractures and periosteal detachment also occurred. Conclusion: Here, for the first time, a threshold level is presented for new bone formation after applying shock waves to intact bone in vivo. The findings of this study are of considerable significance for preventing unwanted side effects in new approaches in the clinical application of shock waves. Copyright (c) 2008 S. Karger AG, Basel

Kinetic Vlasov Simulations of collisionless magnetic Reconnection

A fully kinetic Vlasov simulation of the Geospace Environment Modeling (GEM) Magnetic Reconnection Challenge is presented. Good agreement is found with previous kinetic simulations using particle in cell (PIC) codes, confirming both the PIC and the Vlasov code. In the latter the complete distribution functions $f_k$ ($k=i,e$) are discretised on a numerical grid in phase space. In contrast to PIC simulations, the Vlasov code does not suffer from numerical noise and allows a more detailed investigation of the distribution functions. The role of the different contributions of Ohm's law are compared by calculating each of the terms from the moments of the $f_k$. The important role of the off--diagonal elements of the electron pressure tensor could be confirmed. The inductive electric field at the X--Line is found to be dominated by the non--gyrotropic electron pressure, while the bulk electron inertia is of minor importance. Detailed analysis of the electron distribution function within the diffusion region reveals the kinetic origin of the non--gyrotropic terms

Metal contacts to lowly doped Si and ultra thin SOI

We present our investigations on the fabrication of ohmic and Schottky contacts of several metals on lowly doped bulk Si and SOI wafers. Through this paper we evaluate the fabrication of rectifying devices in which no doping is intentionally introduced

Design of small Stirling dynamic isotope power system for robotic space missions

Design of a multihundred-watt Dynamic Isotope Power System (DIPS) based on the U.S. Department of Energy (DOE) General Purpose Heat Source (GPHS) and small (multihundred-watt) free-piston Stirling engine (FPSE) technology is being pursued as a potential lower cost alternative to radioisotope thermoelectric generators (RTG's). The design is targeted at the power needs of future unmanned deep space and planetary surface exploration missions ranging from scientific probes to Space Exploration Initiative precursor missions. Power level for these missions is less than a kilowatt. Unlike previous DIPS designs which were based on turbomachinery conversion (e.g. Brayton), this small Stirling DIPS can be advantageously scaled down to multihundred-watt unit size while preserving size and mass competitiveness with RTG's. Preliminary characterization of units in the output power ranges 200-600 We indicate that on an electrical watt basis the GPHS/small Stirling DIPS will be roughly equivalent to an advanced RTG in size and mass but require less than a third of the isotope inventory