Schottky barriers measurements through Arrhenius plots in gas sensors based on semiconductor films

The oxygen adsorption effects on the Schottky barriers height measurements for thick films gas sensors prepared with undoped nanometric SnO2 particles were studied. From electrical measurements, the characteristics of the intergranular potential barriers developed at intergrains were deduced. It is shown that the determination of effective activation energies from conduction vs. 1/temperature curves is not generally a correct manner to estimate barrier heights. This is due to gas adsorption/desorption during the heating and cooling processes, the assumption of emission over the barrier as the dominant conduction mechanism, and the possible oxygen diffusion into or out of the grains.Fil: Schipani, Federico. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación En Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingeniería; ArgentinaFil: Aldao, Celso Manuel. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación En Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingeniería; ArgentinaFil: Ponce, Miguel Adolfo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación En Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingeniería; Argentin

Study of the oxygen vacancies changes in SnO2 polycrystalline thick films using impedance and photoemission spectroscopies

Changes in the concentration of oxygen vacancies within the grains of polycrystalline SnO2, due to different atmosphere exposures, were detected using impedance and photoemission spectroscopies. From measured capacitance values, variations of the potential barrier widths could be determined. It is shown that under the presence of an oxygen rich atmosphere, at relatively low temperature, the width of intergranular potential barriers increase to the point that grains become completely depleted of carriers. With subsequent exposure to vacuum, capacitance adopts a higher value, indicative of intergranular barriers and quasi-neutral regions at the center of the grains. X-ray and ultraviolet photoemission spectroscopy measurements showed that SnO2 samples treated in oxidizing or reducing environments have similar barrier heights and different work functions. Results are especially relevant in the study of mechanisms responsible for metal oxide gas sensingFil: Schipani, Federico. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación En Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingeniería; ArgentinaFil: Ponce, Miguel Adolfo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación En Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingeniería; ArgentinaFil: Joanni, Ednan. CTI Renato Archer. Sao Paulo; BrasilFil: Williams, Federico Jose. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Química, Física de los Materiales, Medioambiente y Energía; ArgentinaFil: Aldao, Celso Manuel. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación En Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingeniería; Argentin

Modification of sensitivity of BaSnO3 sensor due to parameters of synthesis and formation of the device

Powders of BaSnO3 were synthesized to obtain gas sensor thick films (using the screen printing technique) for the detection of O2 and CO. Impedance spectroscopy was used at different atmospheres and temperatures. In the presence of O2, the films showed a maximum value of sensitivity at 300 °C, with the powders formed by Pechini presenting greater reproducibility and sensitivity (with an order of magnitude greater than that for the powders formed by precipitation). Results showed that the films formed with powders obtained using the Pechini method presented a better response to CO, with a maximum sensitivity at 450 °C. In addition, in the presence of CO and for T > 250 °C, these films showed an anomalous behavior regarding their sensitivity as a function of time when platinum electrodes were used: a great increase in the electrical resistance value for exposure times greater than 10 min.Fil: Ochoa, Yasser H.. Universidad del Cauca; ColombiaFil: Schipani, Federico. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Aldao, Celso Manuel. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Rodriguez Paez, Jorge Enrique. Universidad del Cauca; ColombiaFil: Ponce, Miguel Adolfo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentin

Conductance model for single-crystalline/compact metal oxide gas-sensing layers in the nondegenerate limit: Example of epitaxial SnO2(101)

Semiconducting metal oxide (SMOX)-based gas sensors are indispensable for safety and health applications, for example, explosive, toxic gas alarms, controls for intake into car cabins, and monitor for industrial processes. In the past, the sensor community has been studying polycrystalline materials as sensors where the porous and random microstructure of the SMOX does not allow a separation of the phenomena involved in the sensing process. This led to conduction models that can model and predict the behavior of the overall response, but they were not capable of giving fundamental information regarding the basic mechanisms taking place. The study of epitaxial layers is a definite improvement, allowing clarifying the different aspects and contributions of the sensing mechanisms. A detailed analytical model of the transduction function for n-A nd p-type single-crystalline/compact metal oxide gas sensors was developed that directly relates the conductance of the sample with changes in the surface electrostatic potential. Combined dc resistance and work function measurements were used in a compact SnO2(101) layer in operando conditions that allowed us to check the validity of our model in the region where Boltzmann approximation holds to determine the surface and bulk properties of the material.Fil: Simion, Cristian Eugen. Institut de Physique Des Matériaux, Bucarest-magurele; RumaniaFil: Schipani, Federico. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Papadogianni, Alexandra. Paul Drude Institut Fur Festkorperelektronik; AlemaniaFil: Stanoiu, Adelina. Institut de Physique Des Matériaux, Bucarest-magurele; RumaniaFil: Budde, Melanie. Paul Drude Institut Fur Festkorperelektronik; AlemaniaFil: Oprea, Alexandru. Universität Tübingen; AlemaniaFil: Weimar, Udo. Universität Tübingen; AlemaniaFil: Bierwagen, Oliver. Paul Drude Institut Fur Festkorperelektronik; AlemaniaFil: Barsan, Nicolae. Universität Tübingen; Alemani

Experimental and ab Initio Studies of Deep-Bulk Traps in Doped Rare-Earth Oxide Thick Films

Lanthanum-doped CeO2 is a promising semiconductor for gas sensing. A combined study applying impedance spectroscopy and first-principles calculations was performed for pure and lanthanum-doped samples. The results showed a strong influence of the localized Ce 4f states on the electrical conduction processes and an electrical resistance increase as a function of the exposure to vacuum and air atmospheres. After its modification with a rare-earth element along with exposure to reducing and oxidizing atmospheres, the observed behavior suggested the presence of multitraps, which depended on the described equilibrium between the oxygen vacancies (Vo x ↔ VO· ↔ VO· ) in a disordered deep-bulk trap location. According to the DFT results, the multitraps were formed with the creation of an oxygen vacancy far from the doping atom. They were considered to be responsible for the phenomena modifying the Debye-like response. The transfer of electrons from Ce(III) to the adsorbed oxygen species, decreasing the number of electrons in the 4f state, reduced the electrical conductivity by the hopping frequency dependence of the total resistance and capacitances. This was probably due to the interactions between defective oxygen and metallic species.Fil: Silva Rosa Rocha, Leandro. Universidade Federal do São Carlos; BrasilFil: Schipani, Federico. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Aldao, Celso Manuel. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Cabral, Luís A.. Universidade Federal do São Carlos; BrasilFil: Simoes, Alexandre Z.. Faculdade de Engenharia de Guaratinguetá, Unesp; BrasilFil: Macchi, Carlos Eugenio. Universidad Nacional del Centro de la Provincia de Buenos Aires.. Facultad de Ciencias Exactas. Departamento de Física; Argentina. Consejo Nacional de Investigaciones Cientificas y Tecnicas. Centro Cientifico Tecnologico Conicet - Tandil. Sede Tandil del Centro de Investigaciones En Fisica E Ingenieria del Centro de la Provincia de Buenos Aires.; ArgentinaFil: Marques, Gilmar Eugenio. Universidade Federal do São Carlos; BrasilFil: Ponce, Miguel Adolfo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Longo, Elson. Universidade Federal do São Carlos; Brasi

MITS: the Multi-Imaging Transient Spectrograph for SOXS

The Son Of X-Shooter (SOXS) is a medium resolution spectrograph R~4500 proposed for the ESO 3.6 m NTT. We present the optical design of the UV-VIS arm of SOXS which employs high efficiency ion-etched gratings used in first order (m=1) as the main dispersers. The spectral band is split into four channels which are directed to individual gratings, and imaged simultaneously by a single three-element catadioptric camera. The expected throughput of our design is >60% including contingency. The SOXS collaboration expects first light in early 2021. This paper is one of several papers presented in these proceedings describing the full SOXS instrument

The VIS detector system of SOXS

SOXS will be a unique spectroscopic facility for the ESO NTT telescope able to cover the optical and NIR bands thanks to two different arms: the UV-VIS (350-850 nm), and the NIR (800-1800 nm). In this article, we describe the design of the visible camera cryostat and the architecture of the acquisition system. The UV-VIS detector system is based on a e2v CCD 44-82, a custom detector head coupled with the ESO continuous ow cryostats (CFC) cooling system and the NGC CCD controller developed by ESO. This paper outlines the status of the system and describes the design of the different parts that made up the UV-VIS arm and is accompanied by a series of contributions describing the SOXS design solutions.Comment: 9 pages, 13 figures, to be published in SPIE Proceedings 1070

Optical design of the SOXS spectrograph for ESO NTT

An overview of the optical design for the SOXS spectrograph is presented. SOXS (Son Of X-Shooter) is the new wideband, medium resolution (R>4500) spectrograph for the ESO 3.58m NTT telescope expected to start observations in 2021 at La Silla. The spectroscopic capabilities of SOXS are assured by two different arms. The UV-VIS (350-850 nm) arm is based on a novel concept that adopts the use of 4 ion-etched high efficiency transmission gratings. The NIR (800- 2000 nm) arm adopts the '4C' design (Collimator Correction of Camera Chromatism) successfully applied in X-Shooter. Other optical sub-systems are the imaging Acquisition Camera, the Calibration Unit and a pre-slit Common Path. We describe the optical design of the five sub-systems and report their performance in terms of spectral format, throughput and optical quality. This work is part of a series of contributions describing the SOXS design and properties as it is about to face the Final Design Review.Comment: 9 pages, 9 figures, published in SPIE Proceedings 1070

The Acquisition Camera System for SOXS at NTT

SOXS (Son of X-Shooter) will be the new medium resolution (R$\sim$4500 for a 1 arcsec slit), high-efficiency, wide band spectrograph for the ESO-NTT telescope on La Silla. It will be able to cover simultaneously optical and NIR bands (350-2000nm) using two different arms and a pre-slit Common Path feeding system. SOXS will provide an unique facility to follow up any kind of transient event with the best possible response time in addition to high efficiency and availability. Furthermore, a Calibration Unit and an Acquisition Camera System with all the necessary relay optics will be connected to the Common Path sub-system. The Acquisition Camera, working in optical regime, will be primarily focused on target acquisition and secondary guiding, but will also provide an imaging mode for scientific photometry. In this work we give an overview of the Acquisition Camera System for SOXS with all the different functionalities. The optical and mechanical design of the system are also presented together with the preliminary performances in terms of optical quality, throughput, magnitude limits and photometric properties.Comment: 9 pages, 7 figures, SPIE conferenc