22 research outputs found
Araticum (Annona crassiflora) seed powder (ASP) for the treatment of colored effluents by biosorption
Dyes are widely used in many industrial sectors, many contain harmful substances to human health, and their release into the environment entails several environmental problems, generating a major worldwide concern as water resources are increasingly limited. The development of cheap and efficient biosorbents that remove these pollutants is of utmost importance. In this study, powdered seeds of the araticum fruit (Annona crassiflora) were used in the biosorption of crystal violet (CV) dye from aqueous solutions and simulated textile effluents. Through the characterization techniques, it can be observed that the material presented an amorphous structure, containing an irregular surface composed mainly by groups containing carbon, hydrogen, and oxygen. CV biosorption was favored at the natural pH of the solution (7.5) for a dosage of 0.7 g Lâ»Âč of araticum seed powder. The pseudo-second-order model was the most suitable to represent the biosorption kinetics in the removal of the CV. Biosorption capacity reached equilibrium in the first minutes at the lowest concentrations, and, at the highest, after 120 min. The equilibrium data were well represented by the Langmuir model, with a maximum biosorption capacity of 300.96 mg gâ»Âč at 328 K. Biosorption had a spontaneous and endothermic nature. In the treatment of a simulated effluent, the biosorbent removed 87.8% of the color, proving to be efficient. Therefore, the araticum seeds powder (ASP) can be used as a low-cost material for the treatment of colored effluents containing the crystal violet (CV) dye
Treatment of water containing methylene by biosorption using Brazilian berry seeds (Eugenia uniflora)
Brazilian berry seeds (Eugenia uniflora) were used as an eco-friendly and low-cost biosorbent for the treatment of textile effluents containing methylene blue. Characterization techniques indicated that Brazilian berry seeds are constituted of irregular particles, mainly composed of lignin and holocellulose groups, distributed in an amorphous structure. Methylene blue biosorption was favorable at pH of 8, using a biosorbent dosage of 0.8 g Lâ1. The equilibrium was reached in the first 20 min for lower M methylene blue concentrations and 120 min for higher methylene blue concentrations. Furthermore, the general and pseudo-second-order models were suitable for describing the kinetic data. Langmuir was the most adequate model for describing the isotherm curves, predicting a biosorption capacity of 189.6 mg gâ1 at 328 K. Biosorption was spontaneous (ââ9.54ââ€âÎG0 â€ââ8.06 kJ molâ1) and endothermic, with standard enthalpy change of 6.11 kJ molâ1. Brazilian berry seeds were successfully used to remove the color of two different simulated textile effluents, achieving 92.2% and 73.5% of removal. Last, the fixed-bed experiment showed that a column packed with Brazilian berry seeds can operate during 840 min, attaining biosorption capacity of 88.7 mg gâ1. The data here presented indicates that textile effluents containing methylene blue can be easily and successfully treated by an eco-friendly and low-cost biosorbent like Brazilian berry seeds
An overview of geological originated materials as a trend for adsorption in wastewater treatment
Adsorption is a unit operation widely used for the tertiary treatment of the most diverse effluents, whose mechanism is based on removing recalcitrant compounds from the organic and inorganic origin. In this process, choosing a suitable adsorbent is a fundamental point. This review article focuses on the adsorbents with natural geological origin: minerals, clays, geopolymers, and even wastes resulted from mining activity. Therefore, over 450 articles and research papers were explored. These materials' main sources are described, and their characteristics, composition, and intrinsic properties are related to adsorption. Herein, we discuss the effects of several process parameters, such as pH, temperature, pollutant, and adsorbent concentration. Furthermore, equilibrium, kinetics, and thermodynamic aspects are also addressed, and relevant regeneration prospects and final disposal. Finally, some suggestions and perspectives on applying these adsorbents in wastewater treatment are presented as future trends
Evaluation of Ocotea puberula bark powder (OPBP) as an effective adsorbent to uptake crystal violet from colored effluents: alternative kinetic approaches
The Ocotea puberula bark powder (OPBP) was evaluated as an effective adsorbent for the removal of crystal violet (CV) from colored effluents. OPBP was characterized and presented a surface with large cavities, organized as a honeycomb. The main functional groups of OPBP were O-H, N-H, C=O, and C-O-C. The adsorption of CV on OPBP was favorable at pH 9 with a dosage of 0.75 g Lâ1. The Avrami model was the most suitable to represent the adsorption kinetic profile, being the estimated equilibrium concentration value of 3.37 mg Lâ1 for an initial concentration of 50 mg Lâ1 (CV removal of 93.3%). The equilibrium was reached within 90 min. The data were better described by the Langmuir isotherm, reaching a maximum adsorption capacity of 444.34 mg gâ1 at 328 K. The Gibbs free energy ranged from ââ26.3554 to ââ27.8055 kJ molâ1, and the enthalpy variation was ââ11.1519 kJ molâ1. The external mass transfer was the rate-limiting step, with Biot numbers ranging from 0.0011 to 0.25. Lastly, OPBP application for the treatment of two different simulated effluents was effective, achieving a removal percentage of 90%
Transforming shrub waste into a high-efficiency adsorbent: Application of Physalis peruvian chalice treated with strong acid to remove the 2,4-dichlorophenoxyacetic acid herbicide
In this study, the chalice generated from the production of the Physalis peruviana fruit was subjected to a treatment with sulfuric acid and applied in the adsorption of 2,4-Dichlorophenoxyacetic acid (2,4-D). The precursor, and the treated material before and after the adsorption, were analyzed by different techniques. After the acid treatment, it was found that the surface was changed from a smooth to an irregular surface with the presence of cavities with irregular size. The adsorption was favored at pH = 2 and with a dosage of 0.8 g Lâ1. The pseudo-second-order model was the best to represent kinetic data. The isothermal experiments were well represented by the Langmuir and TĂłth models, reaching a high capacity of 244 and 320 mg gâ1, respectively. The computed thermodynamic values show that the 2,4-D adsorption was spontaneous and exothermic. Overall, this study indicates that the Physalis peruviana chalice treated with strong acid presents great potential as an alternative material for the adsorption/removal of 2,4-D herbicide from liquid effluents
An eco-friendly and low-cost strategy for groundwater defluorination: adsorption of fluoride onto calcinated sludge
The excess of fluoride ions (Fâ) in water for human supply is a serious public health. The recommended concentration of Fâ ions by the World Health Organization (WHO) is 1.5âmgâL-1. Several groundwater sources around the world contain high Fâ concentrations, and require treatment before human consumption. It was developed an eco-friendly and low-cost strategy for groundwater defluorination, i.e., adsorption onto calcinated sludge. This strategy was efficient at pH of 5.5 and using 5âg L-1 of calcinated sludge. The groundwater attained the WHO standard within 60âmin. The kinetic model of pseudo-second-order obtained a better adjustment to the experimental data. The equilibrium curve at 25â°C was better represented by the TĂłth model. The maximum adsorption capacity was 2.04âmgâg-1. Therefore, adsorption using calcinated sludge can be considered as an eco-friendly and low-cost strategy for groundwater defluorination
Biosorption of Neodymium (Nd) from Aqueous Solutions Using Spirulina platensis sp. Strains
Rare earth elements such as neodymium (Nd) are important elements used mainly in developing new technologies. Although they are found in low concentrations in nature, they can be obtained by extracting solid samples such as phosphogypsum. Among the techniques, adsorption has been used successfully with several adsorbent materials. In this work, two strains of Spirulina platensis (LEB-18 and LEB-52) were employed as biosorbents for efficiently removing the Nd element from the aqueous media. Biosorption tests were carried out in a batch system, and the results of the biosorption kinetics showed that for both materials, the biosorption of Nd was better described by the Avrami model. Moreover, it could be considered that 80 min would be necessary to attain the equilibrium of Nd(III) using both biosorbents. The result of the biosorption isotherms showed that for both strains, the best-fitted model was the Liu model, having a maximum biosorption capacity of 72.5 mg g(-1) for LEB-18 and 48.2 mg g(-1) for LEB-52 at a temperature of 298 K. Thermodynamics of adsorption showed that for both LEB-18 and LEB-52 the process was favorable ( increment G degrees < 0) and exothermic ( increment H degrees -23.2 for LEB-18 and increment H degrees -19.9 for LEB-52). Finally, both strains were suitable to uptake Nd, and the better result of LEB-18 could be attributed to the high amount of P and S groups in this biomass. Based on the results, a mechanism of electrostatic attraction of Nd3+ and phosphate and sulfate groups of both strains of Spirulina platensis was proposed
Highly effective adsorption of synthetic phenol effluent by a novel activated carbon prepared from fruit wastes of the Ceiba speciosa forest species
Fruit wastes of the Ceiba speciosa forest species were employed as raw material for preparing activated carbon towards removing phenol from water. Concave cavities spread over the entire material surface were observed from characterization results, resulting in a high surface area, 842 m2 gâ1. Adsorption isotherm and kinetic studies were performed under the best conditions of pH (7) and adsorbent dosage (0.83 g Lâ1). An increase in temperature from 298 K to 328 K disfavored the phenol adsorption, decreasing from 156.7 to 145 mg gâ1 for the best-fit model, Langmuir. The thermodynamic results indicated that the phenol adsorption was spontaneous, favorable, and exothermic. The phenol concentration decay shows that the equilibrium is reached at 120 min. The pore volume and surface diffusion model (PVSDM) was employed satisfactorily to describe the phenol decay behavior. The surface diffusion coefficient values were in the range of 10â9 cm2 sâ1. The external and the internal mass transfer were the rate-controlling mechanisms. Therefore, the application of fruit wastes from Ceiba speciosa as raw material for preparing activated carbon proved very efficient towards removing phenol from an aqueous medium. The activated carbon is an alternative material to suppress water contamination due to phenol-derived species
Adsorbents for glyphosate removal in contaminated waters: a review
Glyphosate is an herbicide used to control weeds and optimize agricultural production. However, since glyphosate is an emerging pollutant claimed to be potentially carcinogenic, glyphosate pollution of soils and water is a health issue. There is therefore a need for advanced techniques to remove glyphosate from the environment. Here, we review glyphosate properties and materials for glyphosate adsorption such as biochar and graphene, which display high glyphosate adsorption capacities
Utilization of Pacara Earpod tree (Enterolobium contortisilquum) and Ironwood (Caesalpinia leiostachya) seeds as low-cost biosorbents for removal of basic fuchsin
Wastes from the Pacara Earpod tree (Enterolobium contortisilquum) and Ironwood (Caesalpinia leiostachya) seeds were studied as biosorbents for the removal of basic fuchsin from waters. Both biosorbents were prepared and characterized by different analytical methods. The characterization data showed that both materials were mainly composed of lignin, cellulose, and hemicellulose. Both biosorbents exhibited roughened surfaces and surface functional groups such as C-H, C=O, C=C, C-O, C-N, and OH bonds. Furthermore, the XRD pattern shows an amorphous phase with a wide peak from 10 to 30° due to the lignin. In terms of dosage and pH, the use of 1 g Lâ1 and 9.0, respectively, is recommended. The initial concentrations for the biosorption kinetics ranged from 50 to 500 mg Lâ1, where the Pacara ear and the Ironwood reached an adsorption capacity of 145.62 and 100.743 mg gâ1 for the 500 mg Lâ1. The pseudo-second-order was found to be the proper model for describing biosorption of basic fuchsin onto Pacara Earpod tree and Ironwood, respectively. For the isotherm experiments, the maximum experimental biosorption capacity was found to be 166.858 and 110.317 mg gâ1 for the Pacara Earpod and Ironwood for the initial concentration of 500 mg Lâ1 at 328 K. The Langmuir and the TĂłth models were the best for representing the equilibrium curves for the basic fuchsin on the Pacara Earpod and the Ironwood, respectively. Maximum adsorption capacities of 177.084 mg gâ1 and 136.526 mg gâ1 were achieved for the Pacara Earpod tree and Ironwood, respectively. The biosorption process was spontaneous, endothermic, and favorable for both biosorbents. The biosorbents were also applied for coloration removal of simulated textile effluents, reaching 66% and 54% for the Pacara Earpod and Ironwood, respectively. For the final application, the materials were used in fixed-bed biosorption, with an initial concentration of 200 mg Lâ1, reaching breakthrough times of 710 and 415 min, leading to biosorption capacities of the column of 124.5 and 76.5 mg gâ1, for the Pacara Earpod and Ironwood, respectively