Imaging Flaws under Insulation Using a Squid Magnetometer

Superconducting QUantum Interference Devices (SQUID) are the most sensitive instruments known for the measurement of magnetic fields. An all niobium two-hole homemade SQUID can easily achieve sensitivities of 10-4 Ф0/√Hz (Ф0 = 2.07 × 10-15 Wb). Our complete system has a sensitivity of 50 × 10-15 Tesla √Hz, and more sophisticated systems can reach sensitivities one order of magnitude higher. Due to its high sensitivity, and to the advent of high temperature superconductivity, SQUID systems presents new opportunities for its use in nondestructive evaluation of electrically conducting and ferromagnetic structures, mainly when the area to be inspected is difficult to be reached

Charge identification of fragments with the emulsion spectrometer of the FOOT experiment

The FOOT (FragmentatiOn Of Target) experiment is an international project designed to carry out the fragmentation cross-sectional measurements relevant for charged particle therapy (CPT), a technique based on the use of charged particle beams for the treatment of deep-seated tumors. The FOOT detector consists of an electronic setup for the identification of Z ≥ 3 fragments and an emulsion spectrometer for Z ≤ 3 fragments. The first data taking was performed in 2019 at the GSI facility (Darmstadt, Germany). In this study, the charge identification of fragments induced by exposing an emulsion detector, embedding a C2 H4 target, to an oxygen ion beam of 200 MeV/n is discussed. The charge identification is based on the controlled fading of nuclear emulsions in order to extend their dynamic range in the ionization response

Performance of the ToF detectors in the foot experiment

The FOOT (FragmentatiOn Of Target) experiment aims to deter- mine the fragmentation cross-sections of nuclei of interest for particle therapy and radioprotection in space. The apparatus is composed of several detectors that allow fragment identification in terms of charge, mass, energy and direction. The frag- ment time of flight (ToF) along a lever arm of ∼2 m is used for particle ID, requiring a resolution below 100ps to achieve a sufficient resolution in the fragment atomic mass identification. The timing performance of the ToF system evaluated with 12C and 16O beams is reviewed in this contribution

Charge identification of fragments with the emulsion spectrometer of the FOOT experiment

The FOOT (FragmentatiOn Of Target) experi- ment is an international project designed to carry out the fragmentation cross-sectional measurements relevant for charged particle therapy (CPT), a technique based on the use of charged particle beams for the treatment of deep-seated tumors. The FOOT detector consists of an electronic setup for the identification of Z >= 3 fragments and an emulsion spectrometer for Z <= 3 fragments. The first data taking was performed in 2019 at the GSI facility(Darmstadt, Germany). In this study, the charge identifi-cation of fragments induced by exposing an emulsion detector, embedding a C2H4 target, to an oxygen ion beam of 200 MeV/n is discussed. The charge identifica-tion is based on the controlled fading of nuclear emulsions in order to extend their dynamic range in the ionization response

Elemental fragmentation cross sections for a O-16 beam of 400 MeV/u kinetic energy interacting with a graphite target using the FOOT Delta E-TOF detectors

The study of nuclear fragmentation plays a central role in many important applications: from the study of Particle Therapy (PT) up to radiation protection for space (RPS) missions and the design of shielding for nuclear reactors. The FragmentatiOn Of Target (FOOT) collaboration aims to study the nuclear reactions that describe the interactions with matter of different light ions (like H-1, He-4, C-12, O-16) of interest for such applications, performing double differential fragmentation cross section measurements in the energy range of interest for PT and RPS. In this manuscript, we present the analysis of the data collected in the interactions of an oxygen ion beam of 400 MeV/u with a graphite target using a partial FOOT setup, at the GSI Helmholtz Center for Heavy Ion Research facility in Darmstadt. During the data taking the magnets, the silicon trackers and the calorimeter foreseen in the final FOOT setup were not yet available, and hence precise measurements of the fragments kinetic energy, momentum and mass were not possible. However, using the FOOT scintillator detectors for the time of flight (TOF) and energy loss (Delta E) measurements together with a drift chamber, used as beam monitor, it was possible to measure the elemental fragmentation cross sections. The reduced detector set-up and the limited available statistics allowed anyway to obtain relevant results, providing statistically significant measurements of cross sections eagerly needed for PT and RPS applications. Whenever possible the obtained results have been compared with existing measurements helping in discriminating between conflicting results in the literature and demonstrating at the same time the proper functioning of the FOOT Delta E-TOF system. Finally, the obtained fragmentation cross sections are compared to the Monte Carlo predictions obtained with the FLUKA software

Measuring the Impact of Nuclear Interaction in Particle Therapy and in Radio Protection in Space: the FOOT Experiment

In Charged Particle Therapy (PT) proton or 12C beams are used to treat deep-seated solid tumors exploiting the advantageous characteristics of charged particles energy deposition in matter. For such projectiles, the maximum of the dose is released at the end of the beam range, in the Bragg peak region, where the tumour is located. However, the nuclear interactions of the beam nuclei with the patient tissues can induce the fragmentation of projectiles and/or target nuclei and needs to be carefully taken into account when planning the treatment. In proton treatments, the target fragmentation produces low energy, short range fragments along all the beam path, that deposit a non-negligible dose especially in the first crossed tissues. On the other hand, in treatments performed using 12C, or other (4He or 16O) ions of interest, the main concern is related to the production of long range fragments that can release their dose in the healthy tissues beyond the Bragg peak. Understanding nuclear fragmentation processes is of interest also for radiation protection in human space flight applications, in view of deep space missions. In particular 4He and high-energy charged particles, mainly 12C, 16O, 28Si and 56Fe, provide the main source of absorbed dose in astronauts outside the atmosphere. The nuclear fragmentation properties of the materials used to build the spacecrafts need to be known with high accuracy in order to optimise the shielding against the space radiation. The study of the impact of these processes, which is of interest both for PT and space radioprotection applications, suffers at present from the limited experimental precision achieved on the relevant nuclear cross sections that compromise the reliability of the available computational models. The FOOT (FragmentatiOn Of Target) collaboration, composed of researchers from France, Germany, Italy and Japan, designed an experiment to study these nuclear processes and measure the corresponding fragmentation cross sections. In this work we discuss the physics motivations of FOOT, describing in detail the present detector design and the expected performances, coming from the optimization studies based on accurate FLUKA MC simulations and preliminary beam test results. The measurements planned will be also presented

Manufacturing and Supply Chain Flexibility: Building an Integrative Conceptual Model Through Systematic Literature Review and Bibliometric Analysis

The purpose of this study is twofold: first, to establish the current themes on the topic of manufacturing and supply chain flexibility (MSCF), assess their level of maturity in relation to each other, identify the emerging ones and reflect on how they can inform each other, and second, to develop a conceptual model of MSCF that links different themes connect and highlight future research opportunities. The study builds on a sample of 222 articles published from 1996 to 2018 in international, peer-reviewed journals. The analysis of the sample involves two complementary approaches: the co-word technique to identify the thematic clusters as well as their relative standing and a critical reflection on the papers to explain the intellectual content of these thematic clusters. The results of the co-word analysis show that MSCF is a dynamic topic with a rich and complex structure that comprises five thematic clusters. The value chain, capability and volatility clusters showed research topics that were taking a central role in the discussion on MSCF but were not mature yet. The SC purchasing practices and SC planning clusters involved work that was more focused and could be considered more mature. These clusters were then integrated in a framework that built on the competence–capability perspective and identified the major structural and infrastructural elements of MSCF as well as its antecedents and consequences. This paper proposes an integrative framework helping managers keep track the various decisions they need to make to increase flexibility from the viewpoint of the entire value chain

An optimisation approach for capacity planning: Modelling insights and empirical findings from a tactical perspective

The academic literature presents a research-practice gap on the application of decision support tools to address tactical planning problems in real-world organisations. This paper addresses this gap and extends a previous action research relative to an optimisation model applied for tactical capacity planning in an engineer-to-order industrial setting. The issues discussed herein raise new insights to better understand the practical results that can be achieved through the proposed model. The topics presented include the modelling of objectives, the representation of the production process and the costing approach, as well as findings regarding managerial decisions and the scope of action considered. These insights may inspire ideas to academics and practitioners when developing tools for capacity planning problems in similar contexts. © 2017, Associacao Brasileira de Engenharia de Producao