Super-Hydrophobic Multi-Walled Carbon Nanotube Coatings for Stainless Steel

We have taken advantage of the native surface roughness and the iron content of AISI 316 stainless steel to direct grow multi-walled carbon nanotube (MWCNT) random networks by chemical vapor deposition (CVD) at low-temperature ($< 1000^{\circ}$C), without the addition of any external catalysts or time-consuming pre-treatments. In this way, super-hydrophobic MWCNT films on stainless steel sheets were obtained, exhibiting high contact angle values ($154^{\circ}$) and high adhesion force (high contact angle hysteresis). Furthermore, the investigation of MWCNT films at scanning electron microscopy (SEM) reveals a two-fold hierarchical morphology of the MWCNT random networks made of hydrophilic carbonaceous nanostructures on the tip of hydrophobic MWCNTs. Owing to the Salvinia effect, the hydrophobic and hydrophilic composite surface of the MWCNT films supplies a stationary super-hydrophobic coating for conductive stainless steel. This biomimetical inspired surface not only may prevent corrosion and fouling but also could provide low-friction and drag-reduction.Comment: 6 pages, 3 figure

Exploiting the Hierarchical Morphology of Single-Walled and Multi-Walled Carbon Nanotube Films for Highly Hydrophobic Coatings

Self-assembled hierarchical solid surfaces are very interesting for wetting phenomena, as observed in a variety of natural and artificial surfaces. Here, we report single-walled (SWCNT) and multi-walled carbon nanotube (MWCNT) thin films realized by a simple, rapid, reproducible, and inexpensive filtration process from an aqueous dispersion, that was deposited at room temperature by a dry-transfer printing method on glass. Furthermore, the investigation of carbon nanotube films through scanning electron microscopy (SEM) reveals the multi-scale hierarchical morphology of the self-assembled carbon nanotube random networks. Moreover, contact angle measurements show that hierarchical SWCNT/MWCNT composite surfaces exhibit a higher hydrophobicity (contact angles of up to 137{\deg}) than bare SWCNT (110{\deg}) and MWCNT (97{\deg}) coatings, thereby confirming the enhancement produced by the surface hierarchical morphology.Comment: 7 pages, 5 figures, This article is part of the Thematic Series "Self-assembly of nanostructures and nanomaterials

Le microscopie a scansione di sonda

Le Nanoscienze e lo studio della materia sulla scala nano, tramite moderne tecniche di microscopia, dal punto di vista didattico formativo rappresentano uno strumento estremamente utile e potente per introdurre concetti della meccanica quantistica. Abbiamo illustrato i principi base delle microscopie a scansione di sonda più utilizzate nei laboratori di ricerca e dalle industrie: la microscopia ad effetto tunnel e quella a forza atomica, entrambe in grado di misurare le proprietà fisiche ed elettroniche della materia su scala atomica ed in tempo reale. Interessante il dibattito con i docenti

Heavy metal accumulation capacity of Axinella damicornis (Esper, 1794) (Porifera, Demospongiae): a tool for bioremediation of polluted seawaters

A wide range of contaminants are continuously introduced into the aquatic environment and among these, heavy metals con- stitute one of the most dangerous groups because of their persistent nature, toxicity, tendency to accumulate in organisms and more still, they are non-degradable. Marine organisms such as sponges represent target species for the monitoring of heavy metal contamination due their filtering activity. This study aims to evaluate the retention capacity of lead and cadmium by the sponge Axinella damicornis under laboratory conditions. The sponges were exposed for 144 h to seawaters artificially polluted with lead (Pb) and cadmium (Cd) separately and with a mixture of the two metals. The final goal of the experiments was to evaluate the met- al uptake in the sponge body and efficiency of the sponge in removing the metals from seawater. In particular, the highest values of metal concentration in the sponges were recorded for Pb: this metal was found to be 6 times and 9 times more concentrated than Cd, respectively in the case of exposure to the single metal and to the combination of both metals. The metal concentrations found, especially for Pb, were much higher in A. damicornis than in other organisms investigated in the sea. Remarkable signs of stress and necrosis were recorded in the specimens when exposed to the combination of Pb and Cd, evidencing a synergistic effect of the metals mixture. This study paves adds knowledge on the contamination effects by heavy metals on the marine organisms and on the contribution from A. damicornis as efficient tool for bioremediation of polluted seawaters

Functional rewiring across spinal injuries via biomimetic nanofiber scaffolds

The regrowth of severed axons is fundamental to reestablish motor control after spinal-cord injury (SCI). Ongoing efforts to promote axonal regeneration after SCI have involved multiple strategies that have been only partially successful. Our study introduces an artificial carbon-nanotube based scaffold that, once implanted in SCI rats, improves motor function recovery. Confocal microscopy analysis plus fiber tracking by magnetic resonance imaging and neurotracer labeling of long-distance corticospinal axons suggest that recovery might be partly attributable to successful crossing of the lesion site by regenerating fibers. Since manipulating SCI microenvironment properties, such as mechanical and electrical ones, may promote biological responses, we propose this artificial scaffold as a prototype to exploit the physics governing spinal regenerative plasticity

Magnetic carbon spheres and their derivatives combined with printed electrochemical sensors

Herein, we report the synthesis of several magnetic carbon structures starting from spheres (CSs) to more elongated structures to get tubes and fibers by customizing chemical vapour deposition parameters. These CSs-based products, ranging from nano-to micro-size, were investigated by morphological point of view using scanning electron microscopy, energy dispersive x-ray spectroscopy, and Raman spectroscopy. These carbon structures were combined with screen-printed electrodes highlighting their electrochemical effectiveness towards the detection of several species, i.e. ferricyanide, ascorbic acid, dopamine, cysteine, serotonin, and NADH. The presence of iron nuclei within the carbonaceous lattices, besides having improved the electrochemical performances at the printed electrodes, might confer these CSs-based structures a future application in the field of remediation/sensing. Herein, some preliminary applications were provided showing that these materials can be easily employed to collect species and, successively, coupled with printed electrochemical sensors

Poly(3-hexyl-thiophene) coil-wrapped single wall carbon nanotube investigated by scanning tunneling spectroscopy

Scanning Tunneling Spectroscopy was performed on a (15,0) single wall carbon nanotube partially wrapped by Poly(3-hexyl-thiophene). On the bare nanotube section, the local density of states is in good agreement with the theoretical model based on local density approximation and remarkably is not perturbed by the polymer wrapping. On the coiled section, a rectifying current-voltage characteristic has been observed along with the charge transfer from the polymer to the nanotube. The electron transfer from Poly(3-hexyl-thiophene) to metallic nanotube was previously theoretically proposed and contributes to the presence of the Schottky barrier at the interface responsible for the rectifying behavior

Regioregular poly(3-hexl-thiophene) helical self-organisation on carbon nanotubes

Mixtures of Regioregular Poly(3-hexyl-thiophene) (rrP3HT) and multi wall carbon nanotubes have been investigated by Scanning Tunneling Microscopy in Ultra High Vacuum. Carbon nanotubes covered by rrP3HT have been imaged and analyzed, providing a clear evidence that this polymer self assembles on the nanotube surface following geometrical constraints and adapting its equilibrium chain-to-chain distance. Largely spaced covered nanotubes have been analyzed to investigate the role played by nanotube chirality in the polymer wrapping, evidencing strong rrP3HT interactions along well defined directions