Stacked analysis of earthquake sequences: statistical space-time definition of clustering and Omori law behavior

The definition of the aftershocks sequence is still a debated topic. We here propose a study of the spatial and temporal variation of the earthquakes clustering and rate decay. We used five different seismic catalogues, characterized by specific spatial and magnitude ranges. They are respectively: world one, for a global analysis, Greek, Japanese, Californian and Italian regional catalogues in order to investigate different seismo-tectonic settings. A stacking procedure has been applied to characterize a typical sequence behavior and allowing the evaluation of changes over time intervals

Earthquake sound perception

Sound is an effect produced by almost all earthquakes. Using a web-based questionnaire on earthquake effects that included questions relating to seismic sound, we collected 77,000 responses for recent shallow Italian earthquakes. An analysis of audibility attenuation indicated that the decrease of the percentage of respondents hearing the sound was proportional to the logarithm of the epicentral distance and linearly dependent on earthquake magnitude, in accordance with the behavior of ground displacement. Even if this result was based on Italian data, qualitative agreement with the results of theoretical displacement, and of a similar study based on French seismicity suggests wider validity. We also found that, given earthquake magnitude, audibility increased together with the observed macroseismic intensity, leading to the possibility of accounting for sound audibility in intensity assessment. Magnitude influenced this behavior, making small events easier to recognize, as suggested by their frequency content

How Observer Conditions Impact Earthquake Perception

Intensity scales define the criteria used to determine different levels of shaking in relation to environmental effects. Objective evaluations of low intensity degrees based on transient effects may be difficult. In particular, estimations for the number of people feeling an earthquake are critical, and are qualitatively described by words such as “few”, “many”, and “most” for determining various intensity levels. In general, such qualitative amounts are converted into specific percentages for each macroseismic scale. Additionally, estimations of macroseismic intensity are influenced by variables that are mentioned in macroseismic scale degree descriptions. For example, the Mercalli-Cancani-Sieberg (MCS; Sieberg, 1930) and the Modified Mercalli Intensity (MMI) scales (Wood and Neumann, 1931) describe the intensity II as “Felt only by a few people, extremely susceptible, in perfectly quiet situations, almost always on the upper floors of buildings”. Another example is the European Macroseismic Scale (EMS) (Grunthal, 1998) that describes the intensity V as “felt indoors by most, outdoors by few. Many sleeping people awake”. In this work, we focus on two variables referred to as people’s physical “situation” (what were you doing?), here categorized as “sleeping”, “at rest”, or “in motion”; and the observer’s “location”, here categorized as “higher floors”, “lower floors”, and “outdoors”. Both variables have a partial influence on intensity assessments because they condition vibration perception. However, it is important to study, using an experimental method, the weights of these variables in the quantification of felt effects. Musson (2005a) also recognized the influence of such conditions on the number of people feeling an earthquake, stating that the proportion of people in different conditions “are generally difficult to quantify in any case”. Today, we have a large amount of data available through the macroseismic web site “haisentitoilterremoto” associated with specific observer conditions. Using this data, a study of these effects is possible. For this analysis, we placed attention on transitory effects that, in the past, could not be easily studied due to the intrinsic difficulty in collecting this type of data. The aim of this work was to specifically analyze and quantify how the observer’s “situation” and “location” influence earthquake perception suggesting a new scale description that can be easily used for low intensity estimation

Web-based macroseismic survey in Italy: method validation and results

A new method of macroseismic surveys, based on voluntary collaboration through the Internet, has been running at the Istituto Nazionale di Geofisica e Vulcanologia (INGV) since July 2007. The macroseismic questionnaire is addressed to a single non-specialist; reported effects are statistically analysed to extrapolate a probabilistic estimate of Mercalli Cancani Sieberg and European Macroseismic Scale intensities for that observer. Maps of macroseismic intensity are displayed online in almost real time and are continuously updated when new data are made available. For densely inhabited zones, we have received reports of felt effects for even very small events (M=2). Six earthquakes are presented here, showing the ability of the method to give fast and interesting results. The effects reported in questionnaires coming from three towns are carefully analysed and assigned intensities are compared with those derived from traditional macroseismic surveys, showing the reliability of our web-based method

Influence of observation floor and building height on macroseismic intensity

The perception of an earthquake depends on whether the observer is located on a lower or upper floor within a building. Macroseismic scales propose only a qualitative description of the varying effects felt that are dependent on the floor the observer is on. To quantify these effects, in this study, we analyze 45,000 macroseismic questionnaires collected in Italy reporting on transitory effects. The questionnaires pertain to buildings no more than 10 stories high and are derived from municipalities experiencing a Mercalli-Cancani-Sieberg (MCS) intensity less than or equal to VII with the majority being III and IV. We find that the intensity variation caused by the increased shaking on upper floors can be quantified. The upper floor intensity increases by 0.4 MCS compared with ground and underground levels. After correcting for an average floor-dependence factor, we find a further building height effect evident in short buildings that are probably exposed to less intense shaking. This effect displays a variation with the hypocentral distance reaching an MCS intensity of -0.3 at distances on the order of 200 km

Web based macroseismic survey of 2009 L’Aquila earthquakes sequence

A new method of macroseismic surveys, based on voluntary collaboration through the Internet, has been running at the Istituto Nazionale di Geofisica e Vulcanologia (INGV) since July 2007. The macroseismic questionnaire is addressed to a single non-specialist; reported effects are statistically analysed to extrapolate a probabilistic estimate of Mercalli Cancani Sieberg and European Macroseismic Scale intensities for that observer. Maps of macroseismic intensity are displayed online in almost real time and are continuously updated when new data are made available. For densely inhabited zones, we have received reports of felt effects for even very small events (M=2). Six earthquakes are presented here, showing the ability of the method to give fast and interesting results. The effects reported in questionnaires coming from three towns are carefully analysed and assigned intensities are compared with those derived from traditional macroseismic surveys, showing the reliability of our web-based metho

Review of works combining GNSS and insar in Europe

The Global Navigation Satellite System (GNSS) and Synthetic Aperture Radar Interferometry (InSAR) can be combined to achieve different goals, owing to their main principles. Both enable the collection of information about ground deformation due to the differences of two consequent acquisitions. Their variable applications, even if strictly related to ground deformation and water vapor determination, have encouraged the scientific community to combine GNSS and InSAR data and their derivable products. In this work, more than 190 scientific contributions were collected spanning the whole European continent. The spatial and temporal distribution of such studies, as well as the distinction in different fields of application, were analyzed. Research in Italy, as the most represented nation, with 47 scientific contributions, has been dedicated to the spatial and temporal distribution of its studied phenomena. The state-of-the-art of the various applications of these two combined techniques can improve the knowledge of the scientific community and help in the further development of new approaches or additional applications in different fields. The demonstrated usefulness and versability of the combination of GNSS and InSAR remote sensing techniques for different purposes, as well as the availability of free data, EUREF and GMS (Ground Motion Service), and the possibility of overcoming some limitations of these techniques through their combination suggest an increasingly widespread approach

The AMS-02 Time of Flight System. Final Design

The AMS-02 detector is a superconducting magnetic spectrometer that will operate on the International Space Station. The time of flight (TOF) system of AMS-02 is composed by four scintillator planes with 8, 8, 10, 8 counters each, read at both ends by a total of 144 phototubes. This paper describes the new design, the expected performances, and shows preliminary results of the ion beam test carried on at CERN on October 2002.Comment: 4 pages, 6 EPS figures. Proc. of the 28th ICRC (2003

Building an Integrated Enhanced Virtual Research Environment Metadata Catalogue

Purpose The purpose of this paper is to boost multidisciplinary research by the building of an integrated catalogue or research assets metadata. Such an integrated catalogue should enable researchers to solve problems or analyse phenomena that require a view across several scientific domains. Design/methodology/approach There are two main approaches for integrating metadata catalogues provided by different e-science research infrastructures (e-RIs): centralised and distributed. The authors decided to implement a central metadata catalogue that describes, provides access to and records actions on the assets of a number of e-RIs participating in the system. The authors chose the CERIF data model for description of assets available via the integrated catalogue. Analysis of popular metadata formats used in e-RIs has been conducted, and mappings between popular formats and the CERIF data model have been defined using an XML-based tool for description and automatic execution of mappings. Findings An integrated catalogue of research assets metadata has been created. Metadata from e-RIs supporting Dublin Core, ISO 19139, DCAT-AP, EPOS-DCAT-AP, OIL-E and CKAN formats can be integrated into the catalogue. Metadata are stored in CERIF RDF in the integrated catalogue. A web portal for searching this catalogue has been implemented. Research limitations/implications Only five formats are supported at this moment. However, description of mappings between other source formats and the target CERIF format can be defined in the future using the 3M tool, an XML-based tool for describing X3ML mappings that can then be automatically executed on XML metadata records. The approach and best practices described in this paper can thus be applied in future mappings between other metadata formats. Practical implications The integrated catalogue is a part of the eVRE prototype, which is a result of the VRE4EIC H2020 project. Social implications The integrated catalogue should boost the performance of multi-disciplinary research; thus it has the potential to enhance the practice of data science and so contribute to an increasingly knowledge-based society. Originality/value A novel approach for creation of the integrated catalogue has been defined and implemented. The approach includes definition of mappings between various formats. Defined mappings are effective and shareable.Published929-9514IT. Banche datiJCR Journa