88 research outputs found
Isostaticity, auxetic response, surface modes, and conformal invariance in twisted kagome lattices
Model lattices consisting of balls connected by central-force springs provide
much of our understanding of mechanical response and phonon structure of real
materials. Their stability depends critically on their coordination number .
-dimensional lattices with are at the threshold of mechanical
stability and are isostatic. Lattices with exhibit zero-frequency
"floppy" modes that provide avenues for lattice collapse. The physics of
systems as diverse as architectural structures, network glasses, randomly
packed spheres, and biopolymer networks is strongly influenced by a nearby
isostatic lattice. We explore elasticity and phonons of a special class of
two-dimensional isostatic lattices constructed by distorting the kagome
lattice. We show that the phonon structure of these lattices, characterized by
vanishing bulk moduli and thus negative Poisson ratios and auxetic elasticity,
depends sensitively on boundary conditions and on the nature of the kagome
distortions. We construct lattices that under free boundary conditions exhibit
surface floppy modes only or a combination of both surface and bulk floppy
modes; and we show that bulk floppy modes present under free boundary
conditions are also present under periodic boundary conditions but that surface
modes are not. In the the long-wavelength limit, the elastic theory of all
these lattices is a conformally invariant field theory with holographic
properties, and the surface waves are Rayleigh waves. We discuss our results in
relation to recent work on jammed systems. Our results highlight the importance
of network architecture in determining floppy-mode structure.Comment: 12 pages, 7 figure
The steric influence of extra-framework cations on framework flexibility:An LTA case study
The theoretical extent of framework flexibility of Zeolite A (LTA) in response to the steric and geometric effects of different Si/Al compositions and extra-framework cation content has been explored using GASP software. Flexibility windows and compression mechanisms for siliceous LTA and aluminosilicate Na-LTA, Ca-LTA and K-LTA have been modelled. As expected, relatively small cations in the zeolite pores have little effect on the range of flexibility observed. Aluminosilicate LTA, Na-LTA and Ca-LTA frameworks exhibit identical flexibility windows and these frameworks also follow the same compression mechanisms. The introduction of larger K+ ions, however, results in greater steric hindrance. This restricts the flexibility of the framework and alters the compression mechanism to accommodate these larger cations. It is shown that the limits of the flexibility window of Zeolite A are dependent on framework aluminium content and extra-framework cation size.</p
Flexibility windows in faujasite with explicit water and methanol extra-framework content
Geometric simulations reveal limits on flexibility in a zeolite framework (faujasite) with extra-framework methanol and water contents explicitly present.</p
Zeolite Y supported nickel phosphide catalysts for the hydrodenitrogenation of quinoline as a proxy for crude bio-oils from hydrothermal liquefaction of microalgae
This work demonstrates the potential of zeolite Y supported nickel phosphide materials as
highly active catalysts for the upgrading of bio-oil as improved alternative to noble metal and
transition metal sulphide systems. Our systematic work studied the effect of using different
counterions (NH4
+
, H+
, K+ and Na+
) and Si/Al ratios (2.56 and 15) of the zeolite Y. It
demonstrates that whilst the zeolite counterion itself has little impact on the catalytic activity
of the bare Y-zeolite, it has a strong influence on the activity of the resulting nickel
phosphide catalysts. This effect is related to the nature of the nickel phases formed during the
synthesis process Zeolites containing K+
and Na+
favour the formation of a mixed
Ni12P5/Ni2P phase, H+ Y produces both Ni2P and metallic Ni, whereas NH4
+ Y produces pure
Ni2P, which can be attributed to the strength of the phosphorus-aluminium interaction and the
metal reduction temperature. Using quinoline as a model for the nitrogen-containing
compounds in bio-oils, it is shown that the hydrodenitrogenation activity increases in the
order Ni2P > Ni0 > Ni12P5. While significant research has been dedicated to the development of bio-oils produced by thermal liquefaction of biomass, surprisingly little work has been
conducted on the subsequent catalytic upgrading of these oils to reduce their heteroatom
content and enable processing in conventional petrochemical refineries. This work provides
important insights for the design and deployment of novel active transition metal catalysts to
enable the incorporation of bio-oils into refineries
Intrinsic flexibility of the EMT zeolite framework under pressure
The roles of organic additives in the assembly and crystallisation of zeolites are still not fully understood. This is important when attempting to prepare novel frameworks to produce new zeolites. We consider 18-crown-6 ether (18C6) as an additive, which has previously been shown to differentiate between the zeolite EMC-2 (EMT) and faujasite (FAU) frameworks. However, it is unclear whether this distinction is dictated by influences on the metastable free-energy landscape or geometric templating. Using high-pressure synchrotron X-ray diffraction, we have observed that the presence of 18C6 does not impact the EMT framework flexibility—agreeing with our previous geometric simulations and suggesting that 18C6 does not behave as a geometric template. This was further studied by computational modelling using solid-state density-functional theory and lattice dynamics calculations. It is shown that the lattice energy of FAU is lower than EMT, but is strongly impacted by the presence of solvent/guest molecules in the framework. Furthermore, the EMT topology possesses a greater vibrational entropy and is stabilised by free energy at a finite temperature. Overall, these findings demonstrate that the role of the 18C6 additive is to influence the free energy of crystallisation to assemble the EMT framework as opposed to FAU
Pressure-induced symmetry changes in body-centred cubic zeolites
Previous work has shown a strong correlation between zeolite framework flexibility and the nature of structural symmetry and phase transitions. However, there is little experimental data regarding this relationship, in addition to how flexibility can be connected to the synthesis of these open framework materials. This is of interest for the synthesis of novel zeolites, which require organic additives to permutate the resulting geometry and symmetry of the framework. Here, we have used high pressure powder X-ray diffraction to study the three zeolites: Na-X, RHO and ZK-5, which can all be prepared using 18-crown-6 ether as an organic additive. We observe significant differences in how the occluded 18-crown-6 ether influences the framework flexibility – this being dependant on the geometry of the framework. We use these differences as an indicator to define the role of 18-crown-6 ether during zeolite crystallisation. Furthermore, in conjunction with previous work we predict that pressure-induced symmetry transitions are intrinsic to body-centred cubic zeolites. The high symmetry yields fewer degrees of freedom, meaning it is energetically favourable to lower the symmetry to facilitate further compression.Dataset for the article "Pressure-induced symmetry changes in body-centred cubic zeolites"This repository contains the data included in the article "Pressure-induced symmetry changes in body-centred cubic zeolites". The data consists of high pressure powder X-ray diffraction data collected at the ID15B beamline at the European Synchrotron Radiation Facility (ESRF).Cubic High-Pressure Repository.zi
Recommended from our members
Ensilicated tetanus antigen retains immunogenicity: in vivo study and time-resolved SAXS characterization.
Our recently developed ensilication approach can physically stabilize proteins in silica without use of a pre-formed particle matrix. Stabilisation is done by tailor fitting individual proteins with a silica coat using a modified sol-gel process. Biopharmaceuticals, e.g. liquid-formulated vaccines with adjuvants, frequently have poor thermal stability; heating and/or freezing impairs their potency. As a result, there is an increase in the prevalence of vaccine-preventable diseases in low-income countries even when there are means to combat them. One of the root causes lies in the problematic vaccine 'cold chain' distribution. We believe that ensilication can improve vaccine availability by enabling transportation without refrigeration. Here, we show that ensilication stabilizes tetanus toxin C fragment (TTCF), a component of the tetanus toxoid present in the diphtheria, tetanus and pertussis (DTP) vaccine. Experimental in vivo immunization data show that the ensilicated material can be stored, transported at ambient temperatures, and even heat-treated without compromising the immunogenic properties of TTCF. To further our understanding of the ensilication process and its protective effect on proteins, we have also studied the formation of TTCF-silica nanoparticles via time-resolved Small Angle X-ray Scattering (SAXS). Our results reveal ensilication to be a staged diffusion-limited cluster aggregation (DLCA) type reaction. An early stage (tens of seconds) in which individual proteins are coated with silica is followed by a subsequent stage (several minutes) in which the protein-containing silica nanoparticles aggregate into larger clusters. Our results suggest that we could utilize this technology for vaccines, therapeutics or other biopharmaceuticals that are not compatible with lyophilization
- …