Finite-temperature relativistic Landau problem and the relativistic quantum Hall effect

This paper presents a study of the free energy and particle density of the relativistic Landau problem, and their relevance to the quantum Hall effect. We study first the zero temperature Casimir energy and fermion number for Dirac fields in a 2+1-dimensional Minkowski space-time, in the presence of a uniform magnetic field perpendicular to the spatial manifold. Then, we go to the finite-temperature problem, with a chemical potential, introduced as a uniform zero component of the gauge potential. By performing a Lorentz boost, we obtain Hall's conductivity in the case of crossed electric and magnetic fields.Comment: Final version, to appear in Journal of Physics A: Mathematical and Genera

Hybrid cellulose–Basalt polypropylene composites with enhanced compatibility. The role of coupling agent

This study deals with the development and optimization of hybrid composites integrating microcrystalline cellulose and short basalt fibers in a polypropylene (PP) matrix to maximize the mechanical properties of resulting composites. To this aim, the effects of two different coupling agents, endowed with maleic anhydride (MA-g(grafted)-PP) and acrylic acid (AA-g-PP) functionalities, on the composite properties were investigated as a function of their amount. Tensile, flexural, impact and heat deflection temperature tests highlighted the lower reactivity and effectiveness of AA-g-PP, regardless of reinforcement type. Hybrid formulations with basalt/cellulose (15/15) and with 5 wt. % of MA-g-PP displayed remarkable increases in tensile strength and modulus, flexural strength and modulus, and notched Charpy impact strength, of 45% and 284%, 97% and 263%, and 13%, in comparison with neat PP, respectively. At the same time, the thermo-mechanical stability was enhanced by 65% compared to neat PP. The results of this study, if compared with the ones available in the literature, reveal the ability of such a combination of reinforcements to provide materials suitable for automotive applications with environmental benefits

Correlation between mechanical properties and processing conditions in rubber-toughened wood polymer composites

The use of wood fibers is a deeply investigated topic in current scientific research and one of their most common applications is as filler for thermoplastic polymers. The resulting material is a biocomposite, known as a Wood Polymer Composite (WPC). For increasing the sustainability and reducing the cost, it is convenient to increase the wood fiber content as much as possible, so that the polymeric fraction within the composite is thereby reduced. On the other hand, this is often thwarted by a sharp decrease in toughness and processability-a disadvantage that could be overcome by compounding the material with a toughening agent. This work deals with the mechanical properties in tension and impact of polypropylene filled with 50 wt.% wood flour, toughened with different amounts (0%, 10%, and 20%) of a polypropylene-based thermoplastic vulcanizate (TPV). Such properties are also investigated as a function of extrusion processing variables, such as the feeding mode (i.e., starve vs. flood feeding) and screw speed. It is found that the mechanical properties do depend on the processing conditions: the best properties are obtained either in starve feeding conditions, or in flood feeding conditions, but at a low screw speed. The toughening effect of TPV is significant when its content reaches 20 wt.%. For this percentage, the processing conditions are less relevant in governing the final properties of the composites in terms of the stiffness and strength

Experimental characterization and numerical modelling of the impact behavior of PVC foams

Background Polyvinyl chloride (PVC) foams are widely used in crashworthiness and energy absorption applications due to their low density and the capability of crushing up to large deformations with limited loads. This property is due to their particular constitutive behavior: the stress-strain curve is characterized, after an initial yield or peak stress, by a relevant plateau region followed by a steep increase due to foam densification. Furthermore, the mechanical response of PVC foam is strongly strain rate dependent. Objective This work aims to characterize the mechanical behavior of PVC foams and to develop a complete constitutive model for impact and energy absorption applications. Methods Compressive tests are carried out at different speeds on PVC foam samples having different relative densities. Quasi-static and intermediate strain rate tests are performed by a pneumatic machine, while high strain rate tests are conducted by means of a Split Hopkinson Pressure Bar. The uniaxial stress-strain curves are used to calibrate the visco-elastic and visco-plastic constitutive model. In particular, the material behavior is divided into two parallel branches: the former describes the elasto-plastic behavior, while the latter accounts for the visco-elastic one; the plastic branch also includes a multiplicative term accounting for the strain rate sensitivity of the base material. Results The tests highlight a strong compressibility of the foam with negligible lateral expansion. The energy absorption efficiency, as well as the densification strain, is evaluated. The material model is also implemented in Finite Element (FE) simulations of puncture impact tests, validating the results of the calibration procedure. Conclusions The calibration of the visco-elasto-plastic material model offers a physically consistent identification of the constitutive response of the PVC foams, showing an effective characterization of the impact behavior of the material

Cms gem detector material study for the hl-lhc

A study on the Gaseous Electron Multiplier (GEM) foil material is performed to determine the moisture diffusion rate, moisture saturation level and the effects on its mechanical properties. The study is focused on the foil contact with ambient air and moisture to determine the value of the diffusion coefficient of water in the foil material. The presence of water inside the detector foil can determine the changes in its mechanical and electrical properties. A simulated model is developed with COMSOL Multiphysics v. 4.3 [1] by taking into account the real GEM foil (hole dimensions, shapes and material), which describes the adsorption of water. This work describes the model, its experimental verification, the water diffusion within the entire sheet geometry of the GEM foil, thus gaining concentration profiles and the time required to saturate the system and the effects on the mechanical properties

Surface modification of basalt fibres with ZnO nanorods and its effect on thermal and mechanical properties of pla-based composites

The composites based on basalt fibres and poly(lactic acid) (PLA) show promising applications in biomedical and automotive fields, but their mechanical performance is still largely hindered by poor interfacial properties. Zinc oxide nanorods have been successfully used to tune the PLA/basalt fibre interface by growing them on commercially available basalt fabrics. The hierarchical fibres significantly enhanced the mechanical properties of PLA-based composites, especially their flexural strength and stiffness. These values are 26% and 22% higher than those of unmodified basalt/PLA composites, and 24% and 34% higher than those of glass/PLA composites used as a baseline. The increase in tensile and flexural properties hinges on the mechanical interlocking action promoted by ZnO nanorods and on the creation of a compact transcrystallinity structure. A degradation of PLA matrix was detected but it was positively counteracted by the better interfacial stress transfer. This study offers a novel approach for modifying the fibre–matrix interface of biocomposites intended for high-performance applications

Chemical regeneration of thermally conditioned basalt fibres

The disposal of fibre reinforced composite materials is a problem widely debated in the literature. This work explores the ability to restore the mechanical properties of thermally conditioned basalt fibres through chemical treatments. Inorganic acid (HF) and alkaline (NaOH) treatments proved to be effective in regenerating the mechanical strength of recycled basalt fibres, with up to 94% recovery of the strength on treatment with NaOH. In particular, HF treatment proved to be less effective compared to NaOH, therefore pointing towards a more environmentally sustainable approach considering the disposal issues linked to the use of HF. Moreover, the strength regeneration was found to be dependent on the level of temperature experienced during the thermal treatment process, with decreasing effectiveness as a function of increasing temperature. SEM analysis of the fibres' lateral surfaces suggests that surface defects removal induced by the etching reaction is the mechanism controlling recovery of fibre mechanical properties. In addition, studies on the fracture toughness of the regenerated single fibres were carried out, using focussed ion beam (FIB) milling technique, to investigate whether any structural change in the bulk fibre occurred after thermal exposure and chemical regeneration. A significant increase in the fracture toughness for the regenerated fibres, in comparison with the as-received and heat-treated basalt ones, was measured

Miscarriage following dengue virus 3 infection in the first six weeks of pregnancy of a dengue virus-naive traveller returning from Bali to Italy, April 2016

We report miscarriage following dengue virus (DENV)-3 infection in a pregnant woman returning from Bali to Italy in April 2016. On her arrival, the woman had fever, rash, asthenia and headache. DENV RNA was detected in plasma and urine samples collected the following day. Six days after symptom onset, she had a miscarriage. DENV RNA was detected in fetal material, but in utero fetal infection cannot be demonstrated due to possible contamination by maternal blood

Surface modification of flax yarns by enzymatic treatment and their interfacial adhesion with thermoset matrices

The aim of this study was to assess the effects of commercially available and relatively inexpensive enzyme preparations based on endo 1,4-β-xylanase, pectinase and xyloglucanase on the thermal (TGA), morphological (SEM), chemical (FT-IR) and mechanical (single yarn tensile tests) properties of flax yarns. The preparation based on pectinase and xyloglucanase provided the best results, resulting in the effective removal of hydrophilic components such as hemicellulose and pectin, the individualization of yarns and increased thermal stability at the expense of a reduction in mechanical properties, depending on the treatment parameters. Single yarn fragmentation tests pointed out an improved interfacial adhesion after enzymatic treatment, with reduced debonding length values of 18% for an epoxy matrix and up to 36% for a vinylester resin compared to untreated flax yarns