Effect of sodium hypochlorite and edta irrigation, individually and in alternation, on dentin microhardness at the furcation area of mandibular molars

The aim of this study was to evaluate the effect of irrigation regimens on dentin microhardness at the furcation area of mandibular molars, using sodium hypochlorite and ethylenediaminetetraacetic acid (EDTA), individually and in alternation. The occlusal surface and the roots of 20 non-carious extracted human permanent mandibular molars were cut transversally and discarded. The tooth blocks were embedded in acrylic resin and randomly assigned to 4 groups (n=5) according to the irrigating regimens: 1% NaOCl solution, 17% EDTA solution, 1% NaOCl and 17% EDTA and distilled water (control). Knoop microhardness of dentin at the furcation area was evaluated. Data were analyzed using one-way ANOVA and Tukey's multiple comparison tests (&#945;=0.05). The results of this study indicated that all irrigation solutions, except for distilled water (control), decreased dentin microhardness. EDTA did not show a significant difference with NaOCl/EDTA (p&gt;0.05), but showed a significant difference with NaOCl (p<0.01). EDTA and NaOCl/EDTA showed a maximum decrease in microhardness. The 17% EDTA solution, either alone or in combination with 1% NaOCl reduced significantly dentin microhardness at the furcation area of mandibular molars

Effect of repeated disinfections by microwave energy on the physical and mechanical properties of denture base acrylic resins

The present study evaluated the effect of repeated simulated microwave disinfection on physical and mechanical properties of Clássico, Onda-Cryl and QC-20 denture base acrylic resins. Aluminum patterns were included in metallic or plastic flasks with dental stone following the traditional packing method. The powder/liquid mixing ratio was established according to the manufacturer's instructions. After water-bath polymerization at 74ºC for 9 h, boiling water for 20 min or microwave energy at 900 W for 10 min, the specimens were deflasked after flask cooling and finished. Each specimen was immersed in 150 mL of distilled water and underwent 5 disinfection cycles in a microwave oven set at 650 W for 3 min. Non-disinfected and disinfected specimens were subjected to the following tets: Knoop hardness test was performed with 25 g load for 10 s, impact strength test was done using the Charpy system with 40 kpcm, and 3-point bending test (flexural strength) was performed at a crosshead speed of 0.5 mm/min until fracture. Data were analyzed statistically by ANOVA and Tukey's test (&#945;= 0.05%). Repeated simulated microwave disinfections decreased the Knoop hardness of Clássico and Onda-Cryl resins and had no effect on the impact strength of QC-20. The flexural strength was similar for all tested resins.Este estudo verificou o efeito de repetidas desinfecções por microondas sobre a dureza, impacto e resistência à flexão das resinas acrílicas Clássico, Onda-Cryl e QC-20. Matrizes de alumínio foram incluídas em muflas metálica ou plástica com gesso pedra tipo III, de acordo com a técnica de inclusão tradicional. A proporção polímero/monômero usada foi de acordo com as recomendações dos fabricantes. Depois da polimerização em água à temperatura de 74ºC por 9 h, água em ebulição por 20 min ou por energia de microondas a 900 W por 3 min, os corpos-de-prova foram demuflados após esfriamento da mufla em temperatura ambiente e submetidos ao polimento convencional. Testes de dureza, impacto e resistência à flexão foram feitos nos corpos-de-prova controle e experimentais. Cada corpo-de-prova foi submetido individualmente a 5 desinfecções por microondas em forno doméstico com 900 W de energia por 3 min, imersos em 150 mL de água destilada. O teste de dureza Knoop foi realizado com carga de 25 g por 10 s, de resistência ao impacto pelo sistema Charpy com 40 kpcm e de resistência à flexão por três pontos com velocidade de 0,5 mm/min até fratura. Os dados obtidos foram submetidos à análise de variância e ao teste de Tukey (&#945;=0,05%). Repetidas desinfecções por microondas diminuíram a dureza das resinas Clássico e Onda-Cryl, não promoveram nenhum efeito sobre a resistência ao impacto da resina QC-20. A resistência à flexão foi similar para todas as resinas.CNP

Influência dos cones de guta-percha na obturação de canais laterais artificiais

The aim of this study was to investigate, in vitro, the percentage of filling of simulated lateral canals in teeth obturated with TP medium and standardized gutta-percha points. Twenty human mandibular canines were prepared with LA Axxess (SybronEndo) and K³ Endo rotary system (SybronEndo) up to a #50 file, according to the Free Tip Preparation Technique. During instrumentation, the root canals were alternately irrigated with 1% sodium hypochlorite and 17% EDTA. Six artificial lateral canals were prepared at the apical third of each tooth. Then, the teeth were assigned to two groups (n=10): Group 1 - filled with TP medium master gutta-percha points (Dentsply, Mailleffer); Group 2 - filled with standardized master gutta-percha points (Dentsply, Mailleffer). Root canal filling was complemented with AH Plus sealer (Dentsply, Mailleffer) and accessory gutta-percha points (Dentsply, Mailleffer), according to the classic technique. The teeth were radiographed and the images obtained were digitized. Linear measurements of the percentage of filling of the artificial lateral canals in each group were accomplished on the Image Tool 2.02 software. Statistical analysis of the data using Mann-Whitney U non-parametric test evidenced significant difference (pO objetivo deste estudo foi avaliar in vitro o percentual de preenchimento de canais laterais artificiais em dentes obturados com cones de guta-percha TP medium e estandardizados. Vinte caninos inferiores humanos foram preparados com os instrumentos LA Axxess (SybronEndo) e o sistema rotatório K³ Endo (SybronEndo) até a lima #50, de acordo com a técnica Free Tip Preparation. Durante a instrumentação, os canais radiculares foram alternadamente irrigados com solução de hipoclorito de sódio a 1% e EDTA a 17%. Seis canais laterais artificiais foram confeccionados no terço apical de cada dente. Os dentes foram então divididos em dois grupos (n=10): Grupo 1 - obturados com cones de guta-percha principais TP médium (Dentsply, Mailleffer), Grupo 2 - obturados com cones de guta-percha principais estandardizados (Dentsply, Mailleffer). A obturação do canal radicular foi complementada com o cimento obturador AH Plus (Dentsply, Mailleffer) e cones de guta-percha acessórios (Dentsply, Mailleffer), de acordo com a técnica clássica. Os dentes foram radiografados e as imagens digitalizadas. Realizou-se a mensuração do percentual de obturação dos canais laterais em cada grupo por meio do software Image Tool 2.02. A análise estatística dos dados por meio do teste não paramétrico Mann-Whitney U evidenciou diferença significante (

Effectiveness of different final irrigation protocols in removing debris in flattened root canals

This study evaluated in vitro the capacity of debris removal from the apical third of flattened root canals, using different final irrigation protocols. Thirty human mandibular central incisors with a mesiodistal flattened root were prepared using rotary instrumentation by Endo-Flare 25.12 and Hero 642 30.06, 35.02, 40.02 files, irrigated with 2 mL of 1% NaOCl after each file. The specimens were randomly distributed into 5 groups according to the final irrigation of root canals: Group I: 10 mL of distilled water (control), Group II: 10 mL of 1% NaOCl for 8 min, Group III: 2 mL of 1% NaOCl for 2 min (repeated 4 times), Group IV: 10 mL of 2.5% NaOCl for 8 min, and Group V: 10 mL of 2.5% NaOCl for 2 min (repeated 4 times). The apical thirds of the specimens were subjected to histological processing and 6-&#956;m cross-sections were obtained and stained with hematoxylin-eosin. The specimens were examined under optical microscopy at ×40 magnification and the images were subjected to morphometric analysis using the Scion image-analysis software. The total area of root canal and the area with debris were measured in square millimeters. Analysis of variance showed no statistically significant difference (p>0.05) among the groups GI (2.39 ± 3.59), GII (2.91 ± 2.21), GIII (0.73 ± 1.36), GIV (0.95 ± 0.84) and GV (0.51 ± 0.22). In conclusion, the final irrigation protocols evaluated in this study using the Luer syringe presented similar performance in the removal of debris from the apical third of flattened root canals.Este estudo avaliou, in vitro, a capacidade de remoção de debris do terço apical de canais radiculares achatados, usando diferentes protocolos de irrigação final. Trinta incisivos centrais mandibulares humanos com a raiz mésio-distal achatada foram preparados usando instrumento rotatório Endo-Flare 25.12 e limas Hero 642 30.06, 35.02, 40.02, irrigadas com 2ml de NaOCl 1% após cada lima. Os espécimes foram aleatoriamente distribuídos em cinco grupos de acordo com a irrigação final dos canais radiculares: Grupo I: 10 mL de água destilada (controle), Grupo II: 10 mL de NaOCl a 1% por 8 min, Grupo III: 2 mL de NaOCl a 1% por 2 min (repetidos 4 vezes), Grupo IV: 10 mL de NaOCl 2,5% por 8 min e Grupo V: 10 mL de NaOCl 2,5% por 2 min (repetido 4 vezes). Os terços apicais dos espécimes foram submetidos a processamento histológico de rotina e cortes transversais com 6 &#956;m de espessura foram obtidos e corados com hematoxilina e eosina. Os espécimes foram analisados em microscopia óptica com aumento final de 40 X e as imagens submetidas à análise morfométrica com a utilização do software Scion Image. A análise de variância evidenciou não haver diferença estatística (p>0,05) entre os grupos GI (2,39 ± 3,59), GII (2,91 ± 2,21), GIII (0,73 ± 1,36), GIV (0,95 ± 0,84) e GV (0,51 ± 0,22). Conclui-se que os protocolos de irrigação final utilizando a seringa Luer apresentaram comportamentos semelhantes na remoção de debris do terço apical de canais radiculares achatados

Avaliação comparativa clínico-radiográfica e histopatológica de lesões periapicais inflamatórias crônicas

O objetivo deste estudo foi realizar uma avaliação comparativa entre os aspectos clínico-radiográficos e histopatológicos das lesões periapicais inflamatórias crônicas. Através deste, foram avaliadas 164 lesões inflamatórias crônicas periapicais provenientes de dentes de indivíduos, independendo de idade, raça e sexo. Foram encaminhados casos condizentes com periodontite apical crônica e processo cístico inflamatório avaliados através do exame clínico-radiográfico. Após procedimento cirúrgico, a análise histopatológica foi realizada. Os resultados clínico-laboratoriais foram submetidos à análise estatística. Os resultados mostraram que há constância de fatores de interferência na evolução do processo reparatório periapical representados com ênfase pelo biofilme microbiano apical e/ou por corpos estranhos tanto endógenos como os critais de colesterol quanto exógenos como os materiais endodônticos extravasados indigeríveis ou de difícil digestão; e que alguns processos císticos são passíveis de reversão com o tratamento endodôntico. Nesta pesquisa pode-se observar que é difícil para o clínico ajustar parâmetros definindo a hipótese diagnóstica das lesões periapicais inflamatórias crônicas.The aim of the present study was to comparatively evaluate the clinical, radiographic and histological aspects of chronic inflammatory periapical lesions. One hundred and sixty-four lesions of human teeth, independent of age, race and sex, were evaluated by clinical, radiographic and histological analyses conducted after surgical endodontic treatment. Our results showed that there was uniformity in the interference factors on the evolution of periapical healing such as the apical biofilm and/or endogenous (cholesterol crystals) or exogenous (extruded endodontic materials that are indigestible or of difficult digestion) foreign bodies and that some cysts are reversible with endodontic treatment. We conclude that it is difficult for the clinician to adjust parameters defining a diagnosis of chronic inflammatory periapical lesions

Comparison of different ultrasonic vibration modes for post removal

This in vitro study compared different ultrasonic vibration modes for intraradicular cast post removal. The crowns of 24 maxillary canines were removed, the roots were embedded in acrylic resin blocks, and the canals were treated endodontically. The post holes were prepared and root canal impressions were taken with self-cured resin acrylic. After casting, the posts were cemented with zinc phosphate cement. The samples were randomly distributed into 3 groups (n=8): G1: no ultrasonic vibration (control); G2: tip of the ultrasonic device positioned perpendicularly to core surface and close to the incisal edge; and G3: tip of the ultrasonic device positioned perpendicularly to core surface at cervical region, close to the line of cementation. An Enac OE-5 ultrasound unit with an ST-09 tip was used. All samples were submitted to the tensile test using an universal testing machine at a crosshead speed of 1 mm/min. Data were subjected to one-way ANOVA and Tukey's post-hoc tests (&#945;=0.05). Mean values of the load to dislodge the posts (MPa) were: G1 = 4.6 (± 1.4) A; G2 = 2.8 (± 0.9) B, and G3= 0.9 (± 0.3) C. Therefore, the ultrasonic vibration applied with the tip of device close to the core's cervical area showed higher ability to reduce the retention of cast post to root canal

Dermatite de Contacto au Uso de Luvas de Latex em Consultório Odontologico

Os autores relatam um caso clínico de dermatite de contato, ao uso de luvas, em consultório odontológico. Frazam consideraçoes à respeito dos sinais e sintomas desta doença, comentando aspectos relacionados ao tratamento.Os autores relatam um caso clínico de dermatite de contato, ao uso de luvas, em consultório odontológico. Frazam consideraçoes à respeito dos sinais e sintomas desta doença, comentando aspectos relacionados ao tratamento

Influence of cervical preflaring on determination of apical file size in maxillary premolars: SEM analysis

The purpose of this study was to investigate the influence of cervical preflaring on the determination of the first file that binds at working length (WL) in buccal roots of maxillary premolars. Five groups (n=10) were formed at random and, after standard access cavities, the WL was determined 1 mm short from the apex. In group 1, the initial apical file was inserted without preflaring of cervical and middle thirds of the root canals. In groups 2 to 5, the cervical and middle thirds were enlarged with sizes 90 and 110 Gates-Glidden drills, K³ Orifice Opener instruments, ProTaper instruments and LA Axxess burs, respectively. Canals were sized manually with K-files, starting with #08 K-files inserted passively up to the WL. File sizes were increased until a binding sensation was felt at the WL and the size of the instrument was recorded. Transversal sections of the WL regions were examined under scanning electron microscopy and the discrepancies between the canal diameter and first file to bind at the WL were assessed. Significant differences (p<0.001) were found between the groups. The major discrepancy was found without preflaring (mean 157.8 µm). LA Axxess burs produced the smallest discrepancy (mean 0.8 µm). Gates-Glidden drills and K³ Orifice Opener instruments showed no significant differences (p>0.05) between their results (83.2 µm and 73.6 µm, respectively). The discrepancy for ProTaper instruments was 35.4 µm on average. In conclusion, the instrument binding technique for determination of the anatomical diameter at the WL was not precise. Preflaring of the cervical and middle thirds improved the determination of the anatomical diameter at the WL, and the type of instrument played a major role. Canals preflared with LA Axxess burs showed a more accurate binding of the files to anatomical diameter

Análise morfológica da capacidade de limpeza promovida pela instrumentação rotatória, associada à soluções irrigantes, com limas de níquel-titânio em canais radiculares com achatamento mesio-distal

Variations in the internal anatomy of root canals may interfere with the success of root canal because tissue remnants may remain in the isthmus, re-entrances and ramifications of flattened root canals making instrumentation more difficult. Successful root canal treatment depends fundamentally on shaping, cleaning, disinfection and obturation. This study verified the quality of cleaning of ProFile .04 rotary technique associated with different irrigating solutions: 0.5% sodium hypochlorite, calcium hydroxide + Tergentol and 2% chlorhexidine in canals with mesio-distal flattening. Twelve human mandibular central incisors were randomly divided into 3 groups and instrumented up to ProFile 0.4 #35 file after cervical preparation, and processed histologically. After optical microscopic evaluation, statistical analysis showed that the percentage of cleaning of the three irrigating solutions was statistically different. Two-by-two comparisons classified the irrigating solutions in increasing order of cleaning: calcium hydroxide + Tergentol ; clorexidina >; HCT20