11 research outputs found
Towards long term sustainability of c-Si solar panels: the environmental benefits of glass sheet recovery
The cover glass in a silicon solar panel accounts for about 2/3 of the
device's weight. Recycling these devices at their end-of-life is fundamental to
reducing the industry's environmental impact. Here we investigate the recovery
of these glass sheets by a heat-assisted mechanical process. A panel was
delaminated, and we have utilized Fourier-transform infrared, Raman, and
energy-dispersive spectroscopies to confirm the composition of the remaining
components and identify aging signals. The results demonstrate that the panel's
design was similar to most Silicon solar panels in the market, and we concluded
that it would be feasible to recover the glass in most of these devices. Due to
its chemical and mechanical strength, this glass would be ready to be reused
without the need to melt it again, bringing substantial savings in its energy
content and carbon emission related to its production. The glass sheet would be
ready to be used as cover glass in another solar panel or architecture
material. Our estimates showed that this could be a pathway to reducing the
photovoltaic industry's carbon emissions by more than 2 million tonnes per
year.Comment: 11 pages, 5 figure
Estudo e determina o de rela es estrutura propriedades do composto TbMnO3 Study and determination of structure properties relationships of TbMnO3 compound
Magnetic Nanorings for Biomedical Applications
In this work we investigate the characteristics and feasibility of a new class of magnetic particles that are optimized for possible biological applications as magnetic hyperthermia. These new nanostructures have the nanoring shape, being composed of iron oxides (magnetite or hematite). Such morphology gives the nanoparticles a peculiar magnetic behavior due to their magnetic vortex state. The iron oxide nanorings were obtained using hydrothermal synthesis. X-ray Diffraction confirmed the existence of the desired crystal structure and Scanning Electron Microscopy shows that the magnetite particles had nanometric dimensions with annular morphology (diameter ~250 nm). The nanorings also show intensified magnetic properties and a transition to a vortex state. This study showed that it is possible to obtain magnetic nanorings with properties that can be used in nanotechnological applications (mainly biotechnological ones aimed at the treatment and diagnosis of cancer), in large quantities in a simple synthesis route
Magnetic Nanorings for Biomedical Applications
In this work we investigate the characteristics and feasibility of a new class of magnetic particles that are optimized for possible biological applications as magnetic hyperthermia. These new nanostructures have the nanoring shape, being composed of iron oxides (magnetite or hematite). Such morphology gives the nanoparticles a peculiar magnetic behavior due to their magnetic vortex state. The iron oxide nanorings were obtained using hydrothermal synthesis. X-ray Diffraction confirmed the existence of the desired crystal structure and Scanning Electron Microscopy shows that the magnetite particles had nanometric dimensions with annular morphology (diameter ~250 nm). The nanorings also show intensified magnetic properties and a transition to a vortex state. This study showed that it is possible to obtain magnetic nanorings with properties that can be used in nanotechnological applications (mainly biotechnological ones aimed at the treatment and diagnosis of cancer), in large quantities in a simple synthesis route
Magnetic Nanorings for Biomedical Applications
In this work we investigate the characteristics and feasibility of a new class of magnetic particles that are optimized for possible biological applications as magnetic hyperthermia. These new nanostructures have the nanoring shape, being composed of iron oxides (magnetite or hematite). Such morphology gives the nanoparticles a peculiar magnetic behavior due to their magnetic vortex state. The iron oxide nanorings were obtained using hydrothermal synthesis. X-ray Diffraction confirmed the existence of the desired crystal structure and Scanning Electron Microscopy shows that the magnetite particles had nanometric dimensions with annular morphology (diameter ~250 nm). The nanorings also show intensified magnetic properties and a transition to a vortex state. This study showed that it is possible to obtain magnetic nanorings with properties that can be used in nanotechnological applications (mainly biotechnological ones aimed at the treatment and diagnosis of cancer), in large quantities in a simple synthesis route
On the Distribution of Magnetic Moments in a System of Magnetic Nanoparticles
Particle size distribution carries out a substantial role in the magnetic behavior of nanostructured magnetic systems. In fact, a vast literature on superparamagnetism has been reported, suggesting that the particle size distribution in a system of magnetic nanoparticles (MNPs) corresponds to a lognormal probability density function, and several works have properly considered their magnetic moments following a similar distribution, as a universal rule. In this manuscript, it is demonstrated that alternative probability distribution functions, such as the gamma and Weibull ones, can be used to obtain useful parameters from the analysis of the magnetization curves, indicating there is no universal model to represent the actual magnetic moment distribution in a system of magnetic nanoparticles. Inspired by this observation, a reliable method to properly identify the actual magnetic moment distribution in a given nanostructured magnetic system is proposed and discussed
Fungus-Based Magnetic Nanobiocomposites for Environmental Remediation
International audienceThe use of a variety of microorganisms for the degradation of chemicals is a green solution to the problem of environmental pollution. In this work, fungi–magnetic nanoparticles were studied as systems with the potential to be applied in environmental remediation and pest control in agriculture. High food demand puts significant pressure on increasing the use of herbicides, insecticides, fungicides, pesticides, and fertilizers. The global problem of water pollution also demands new remediation solutions. As a sustainable alternative to commercial chemical products, nanobiocomposites were obtained from the interaction between the fungus M. anisopliae and two different types of magnetic nanoparticles. Fourier transform infrared spectroscopy, optical and electron microscopy, and energy dispersive spectroscopy were used to study the interaction between the fungus and nanoparticles, and the morphology of individual components and the final nanobiocomposites. Analyses show that the nanobiocomposites kept the same morphology as that of the fungus in natura. Magnetic measurements attest the magnetic properties of the nanobiocomposites. In summary, these nanobiocomposites possess both fungal and nanoparticle properties, i.e., nanobiocomposites were obtained with magnetic properties that provide a low-cost approach benefiting the environment (nanobiocomposites are retrievable) with more efficiency than that of the application of the fungus in natura
Fungus-Based Magnetic Nanobiocomposites for Environmental Remediation
The use of a variety of microorganisms for the degradation of chemicals is a green solution to the problem of environmental pollution. In this work, fungi–magnetic nanoparticles were studied as systems with the potential to be applied in environmental remediation and pest control in agriculture. High food demand puts significant pressure on increasing the use of herbicides, insecticides, fungicides, pesticides, and fertilizers. The global problem of water pollution also demands new remediation solutions. As a sustainable alternative to commercial chemical products, nanobiocomposites were obtained from the interaction between the fungus M. anisopliae and two different types of magnetic nanoparticles. Fourier transform infrared spectroscopy, optical and electron microscopy, and energy dispersive spectroscopy were used to study the interaction between the fungus and nanoparticles, and the morphology of individual components and the final nanobiocomposites. Analyses show that the nanobiocomposites kept the same morphology as that of the fungus in natura. Magnetic measurements attest the magnetic properties of the nanobiocomposites. In summary, these nanobiocomposites possess both fungal and nanoparticle properties, i.e., nanobiocomposites were obtained with magnetic properties that provide a low-cost approach benefiting the environment (nanobiocomposites are retrievable) with more efficiency than that of the application of the fungus in natura
Doxorubicin-Loaded Magnetic Nanoparticles: Enhancement of Doxorubicin’s Effect on Breast Cancer Cells (MCF-7)
The incidence of female breast cancer has increased; it is the most commonly diagnosed cancer, at 11.7% of the total, and has the fourth highest cancer-related mortality. Magnetic nanoparticles have been used as carriers to improve selectivity and to decrease the side effects on healthy tissues in cancer treatment. Iron oxide (mainly magnetite, Fe3O4), which presents a low toxicity profile and superparamagnetic behavior, has attractive characteristics for this type of application in biological systems. In this article, synthesis and characterization of magnetite (NP-Fe3O4) and silica-coated magnetite (NP-Fe3O4/SiO2) nanoparticles, as well as their biocompatibility via cellular toxicity tests in terms of cell viability, are carefully investigated. MCF-7 cells, which are commonly applied as a model in cancer research, are used in order to define prognosis and treatment specifics at a molecular level. In addition, HaCaT cells (immortalized human keratinocytes) are tested, as they are normal, healthy cells that have been used extensively to study biocompatibility. The results provide insight into the applicability of these magnetic nanoparticles as a drug carrier system. The cytotoxicity of nanoparticles in breast adenocarcinoma (MCF-7) and HaCat cells was evaluated, and both nanoparticles, NP-Fe3O4/SiO2 and NP-Fe3O4, show high cell viability (non-cytotoxicity). After loading the anti-tumor drug doxorubicin (Dox) on NP-Fe3O4/Dox and NP-Fe3O4/SiO2/Dox, the cytotoxicity against MCF-7 cells increases in a dose-dependent and time-dependent manner at concentrations of 5 and 10 μg/mL. HaCat cells also show a decrease in cell viability; however, cytotoxicity was less than that found in the cancer cell line. This study shows the biocompatibility of NP-Fe3O4/SiO2 and NP-Fe3O4, highlighting the importance of silica coating on magnetic nanoparticles and reinforcing the possibility of their use as a drug carrier system against breast adenocarcinoma cells (MCF-7)
In situ synthesis of Fe 3 O 4 nanoparticles coated by chito-oligosaccharides: physico-chemical characterizations and cytotoxicity evaluation for biomedical applications
International audienceFe 3 O 4 nanoparticles coated with chito-oligosaccharides (COS) were prepared in situ by a simple co-precipitation method through a mixing of iron ions (Fe 3+ and Fe 2+) and COS aqueous solutions followed by precipitation with ammonia. The impact of COS with different degree of polymerization (DP 10, 24 and 45) and degree of Nacetylation (DA) ∼ 24 and 50 % (exhibiting high solubility) on the synthesis and physical properties of the coated magnetic nanoparticles was evaluated. Several advantages were found when the magnetic nanoparticles were prepared in the presence of the studied COSs, such as: preparation of functionalized magnetic nanoparticles with narrower size distributions and, consequently, higher saturation magnetization (an increase of up to 22%); and an expressive increasing in the concentration of COS-coated magnetic nanoparticles (up to twice) in the cell viability test in comparison with pure Fe 3 O 4 nanoparticles. Furthermore, among the analyzed samples, the magnetic nanoparticles coated by COS with DA ∼ 50 % present a higher cytocompatibility. Our results allow envisioning various biomedical applications, valorizing the use of coated-magnetic nanoparticles for magneticfield assisted drug delivery, enzyme or cell immobilization, or as a marker for specific cell tracking, among others