Circuit Structure and Control Method to Reduce Size and Harmonic Distortion of Interleaved Dual Buck Inverter

A new circuit structure and control method for a high power interleaved dual-buck inverter are proposed. The proposed inverter consists of six switches, four diodes and two inductors, uses a dual-buck structure to eliminate zero-cross distortion, and operates in an interleaved mode to reduce the current stress of switch. To reduce the total harmonic distortion at low output power, the inverter is controlled using discontinuous-current-mode control combined with continuous-current-mode control. The experimental inverter had a power-conversion efficiency of 98.5% at output power = 1300 W and 98.3% at output power = 2 kW, when the inverter was operated at an input voltage of 400 V-DC, output voltage of 220 V-AC/60 Hz, and switching frequency of 20 kHz. The total harmonic distortion was < 0.66%, which demonstrates that the inverter is suitable for high-power dc-ac power conversion.11Ysciescopu

Effects of a Passive Back-Support Exosuit on Postural Control and Cognitive Performance During a Fatigue-Inducing Posture Maintenance

Objective To evaluate the effectiveness of passive back-support exosuit on postural control and cognitive performance during a fatigue-inducing posture maintenance task. Background Wearable support systems (exoskeletons/exosuits) reduce physical demands but may also influence postural control and cognitive performance by reducing muscular fatigue. Method Eighteen participants visited on two different days to test an exosuit system and performed dual-task cognitive assessments based on human information processing (information acquisition, information integration, and action implementation) while maintaining a 35° trunk flexion posture for 16 minutes. Center-of-pressure (CoP), cognitive performance, and perceived workload were recorded, while erector spinae muscle activity was captured to quantify muscle fatigue. Results The exosuit was effective in reducing erector spinae muscle fatigue during the static posture maintenance task (61% less in Δmedian frequency: −9.5 Hz (EXO-Off) versus −3.7 Hz (EXO-On)). The fatigue-inducing task increased CoP velocity as a function of time (29% greater: 9.3 mm/sec (pre) versus 12.0 mm/sec (post)), and exosuit use decreased CoP velocity (23% less: 12.1 mm/sec (EXO-Off) versus 9.4 mm/sec (EXO-On)). The exosuit was also effective at mitigating cognitive degradation, as evidenced by a higher hit-to-signal ratio (8% greater: 81.3 (EXO-Off) versus 87.9 (EXO-On)) in the information integration task and reducing perceived workload in all stages of human information processing. Conclusion Exosuit provided benefits of postural control and information integration processing during a 16-min static posture maintenance task.This is a manuscript of the article Published as Kim, Jiwon, Sang Hyeon Kang, Jinfeng Li, Gary A. Mirka, and Michael C. Dorneich. "Effects of a Passive Back-Support Exosuit on Postural Control and Cognitive Performance During a Fatigue-Inducing Posture Maintenance Task." Human Factors (2024): 00187208231221890. doi: https://doi.org/10.1177/00187208231221890. Posted with Permission. © 2024 Human Factors and Ergonomics Society

High-efficiency Bidirectional Buck-Boost Converter for Residential Energy Storage System

This paper proposes a bidirectional dc-dc converter for residential micro-grid applications. The proposed converter can operate over an input voltage range that overlaps the output voltage range. This converter uses two snubber capacitors to reduce the switch turn-off losses, a dc-blocking capacitor to reduce the input/output filter size, and a 1:1 transformer to reduce core loss. The windings of the transformer are connected in parallel and in reverse-coupled configuration to suppress magnetic flux swing in the core. Zero-voltage turn-on of the switch is achieved by operating the converter in discontinuous conduction mode. The experimental converter was designed to operate at a switching frequency of 40-210 kHz, an input voltage of 48 V, an output voltage of 36-60 V, and an output power of 50-500 W. The power conversion efficiency for boost conversion to 60 V was >= 98.3% in the entire power range. The efficiency for buck conversion to 36 V was >= 98.4% in the entire power range. The output voltage ripple at full load was <3.59 V-p.p for boost conversion (60 V) and 1.35 V-p.p for buck conversion (36 V) with the reduced input/output filter. The experimental results indicate that the proposed converter is well-suited to smart-grid energy storage systems that require high efficiency, small size, and overlapping input and output voltage ranges.11Ysciescopu

Evaluation of the transporter-mediated herb-drug interaction potential of DA-9801, a standardized dioscorea extract for diabetic neuropathy, in human in vitro and rat in vivo

BACKGROUND: Drug transporters play important roles in the absorption, distribution, and elimination of drugs and thereby, modulate drug efficacy and toxicity. With a growing use of poly pharmacy, concurrent administration of herbal extracts that modulate transporter activities with drugs can cause serious adverse reactions. Therefore, prediction and evaluation of drug-drug interaction potential is important in the clinic and in the drug development process. DA-9801, comprising a mixed extract of Dioscoreae rhizoma and Dioscorea nipponica Makino, is a new standardized extract currently being evaluated for diabetic peripheral neuropathy in a phase II clinical study. METHOD: The inhibitory effects of DA-9801 on the transport functions of organic cation transporter (OCT)1, OCT2, organic anion transporter (OAT)1, OAT3, organic anion transporting polypeptide (OATP)1B1, OATP1B3, P-glycoprotein (P-gp), and breast cancer resistance protein (BCRP) were investigated in HEK293 or LLC-PK1 cells. The effects of DA-9801 on the pharmacokinetics of relevant substrate drugs of these transporters were also examined in vivo in rats. RESULTS: DA-9801 inhibited the in vitro transport activities of OCT1, OCT2, OAT3, and OATP1B1, with IC(50) values of 106, 174, 48.1, and 273 μg/mL, respectively, while the other transporters were not inhibited by 300 μg/mL DA-9801. To investigate whether this inhibitory effect of DA-9801 on OCT1, OCT2, and OAT3 could change the pharmacokinetics of their substrates in vivo, we measured the pharmacokinetics of cimetidine, a substrate for OCT1, OCT2, and OAT3, and of furosemide, a substrate for OAT1 and OAT3, by co-administration of DA-9801 at a single oral dose of 1,000 mg/kg. Pre-dose of DA-9801 5 min or 2 h prior to cimetidine administration decreased the C(max) of cimetidine in rats. However, DA-9801 did not affect the elimination parameters such as half-life, clearance, or amount excreted in the urine, suggesting that it did not inhibit elimination process of cimetidine, which is governed by OCT1, OCT2, and OAT3. Moreover, DA-9801 did not affect the pharmacokinetic characteristics of furosemide, as evidenced by its unchanged pharmacokinetic parameters. CONCLUSION: Inhibitory effects of DA-9801 on OCT1, OCT2, and OAT3 observed in vitro may not necessarily translate into in vivo herb-drug interactions in rats even at its maximum effective dose

Association between Obesity and Physical Fitness, and Hemoglobin A1c Level and Metabolic Syndrome in Korean Adults

BACKGROUND: The purpose of the current study was to investigate the association of obesity level, physical fitness level, hemoglobin A1c (HbA1c) level and metabolic syndrome (MetS) risk factors among Korean adults. METHODS: A total of 557 adults (272 males and 285 females) who underwent medical check-up at local hospital were recruited. In addition to regular health check-up, cardiopulmonary fitness, muscular endurance were measured and their association were analyzed. RESULTS: The prevalence of MetS was 31.7% for males and 23.7% for females. Females with the higher muscular endurance had lower waist circumference, triglyceride level, and HbA1c level than those with the lower muscular endurance. Males with the higher level of cardiopulmonary fitness had lower diastolic blood pressure, lower high-sensitivity C-reactive protein level and higher high density lipoprotein cholesterol level than males with the lower level of cardiopulmonary fitness. Females with the higher level of cardiopulmonary fitness had lower body weight, body mass index, systolic blood pressure, and fasting blood glucose level than females with the lower level of cardiopulmonary fitness. Participants with the higher level of adiposity and the lower level of physical fitness were 5.26 times (95% confidence interval [CI], 2.19 to 12.62), 5.71 times (95% CI, 2.23 to 14.60) more likely to have MetS, respectively, in male and female compared to participants who were neither obese nor have the lower level of fitness. CONCLUSION: This study suggests that maintaining a healthy body weight as well as a certain level of fitness is important for the prevention of MetS.ope

Obstructive Fibrinous Tracheal Pseudomembrane After Tracheal Intubation: A Case Report

Obstructive fibrinous tracheal pseudomembrane is a rare, but potentially fatal complication associated with endotracheal intubation. It has been known that the formation of tracheal pseudomembrane is related with intracuff pressure during endotracheal intubation or infectious cause. But in the patient described in this case, pseudomembrane formation in the trachea was associated with subglottic epithelial trauma or caustic injuries to the trachea caused by aspirated gastric contents during intubation rather than tracheal ischemia due to high cuff pressure. We report a patient with obstructive fibrinous tracheal pseudomembrane after endotracheal intubation who presented with dyspnea and stridor and was treated successfully with mechanical removal using rigid bronchoscopy

Comparison of The Genome Profiles Between Head and Body Lice

The body louse (Pediculus humanus humanus) is known to have diverged from the head louse (P. humanus capitis) but genomic differences between these two subspecies still remain unexplored. To compare genomic profiles between head and body lice, whole genome sequences of head lice were determined by next generation sequencing methods based on both Illumina Genome analyzer and Roche GS FLX pyrosequencing and compared with the reference genome sequences of the body louse. Total consensuses generated by mapping to the body louse genome in conjunction with de novo assembly of head louse genome sequences revealed a head louse genome size of 110 Mbp with a 96% coverage of the body louse genome sequences. A total of 12,651 genes were predicted from the head louse genome sequences although more precise assembly and functional annotation of the genome is required for a more accurate gene count. Among the 873 genes that were putatively specific to the head louse, 15 genes were confirmed to be transcribed in both head and body lice, suggesting the previously estimated gene number of the body louse was likely underestimated. The single nucleotide polymorphism analysis showed that the nucleotide diversity of genome between head and body lice was 2.2%, which was larger than that of the transcriptome between head and body lice. An endosymbiont genome analysis showed that the composition of endosymbionts in head lice was similar to that of body lice and Candidatus Riesia pediculicola was the primary endosymbiont in both head and body lice

Electrochemical Properties of Chemically Processed SiO

A SiOx coating material for Si anode in lithium-ion battery was processed by using SiCl4 and ethylene glycol. The produced SiOx particles after heat treatment at 725°C for 1 h were porous and irregularly shaped with amorphous structure. Pitch carbon added to SiOx was found to strongly affect solid electrolyte interphase stabilization and cyclic stability. When mixed with an optimal amount of 30 wt% pitch carbon, the SiOx showed a high charge/discharge cyclic stability of about 97% for the 2nd to the 50th cycle. The initial specific capacity of the SiOx was measured to be 1401 mAh/g. On the basis of the evaluation of the SiOx coating material, the process utilized in this study is considered an efficient method to produce SiOx with high performance in an economical way