13 research outputs found
(Photo)physical properties of new molecular glasses end-capped with thiophene rings composed of diimide and imine units
New symmetrical arylene bisimide derivatives formed by using electron-donating-electron-accepting systems were synthesized. They consist of a phthalic diimide or naphthalenediimide core and imine linkages and are end-capped with thiophene, bithiophene, and (ethylenedioxy)thiophene units. Moreover, polymers were obtained from a new diamine, N,NâČ-bis(5- aminonaphthalenyl)naphthalene-1,4,5,8-dicarboximide and 2,5- thiophenedicarboxaldehyde or 2,2âČ-bithiophene-5,5âČ-dicarboxaldehyde. The prepared azomethine diimides exhibited glass-forming properties. The obtained compounds emitted blue light with the emission maximum at 470 nm. The value of the absorption coefficient was determined as a function of the photon energy using spectroscopic ellipsometry. All compounds are electrochemically active and undergo reversible electrochemical reduction and irreversible oxidation processes as was found in cyclic voltammetry and differential pulse voltammetry (DPV) studies. They exhibited a low electrochemically (DPV) calculated energy band gap (Eg) from 1.14 to 1.70 eV. The highest occupied molecular orbital and lowest unoccupied molecular orbital levels and Eg were additionally calculated theoretically by density functional theory at the B3LYP/6-31G(d,p) level. The photovoltaic properties of two model compounds as the active layer in organic solar cells in the configuration indium tin oxide/poly(3,4-(ethylenedioxy)thiophene):poly(styrenesulfonate)/active layer/Al under an illumination of 1.3 mW/cm2 were studied. The device comprising poly(3-hexylthiophene) with the compound end-capped with bithiophene rings showed the highest value of Voc (above 1 V). The conversion efficiency of the fabricated solar cell was in the range of 0.69-0.90%
CuO/TiO2 and Cu2O/TiO2 nanoparticles influence on parameters of bulk heterojunction organic solar cells
This publication presents a study conducted for related pyrazoloquinoline doped nanoparticles CuO/TiO2 and Cu2O/TiO2. The mixtures were used as the active material for the construction of photovoltaic cells
Thermal Dependence of Optical Parameters of Thin Polythiophene Films Blended with PCBM
The main purpose of this work is to show the thermal dependence of the refractive and extinction indices of conjugated polymer films used in optoelectronics devices. Herein, we present the results of optical investigations performed for the following polymers: poly(3-hexylthiophene) (P3HT), poly(3-octylthiophene) (P3OT), and their blends with [6,6]-phenyl C61 butyric acid methyl ester (PCBM). For our analysis, we chose well-known polythiophenes such P3HT and P3OT, often used in photovoltaic cells. Our addition of PCMB to the polythiophenes allows their conversion efficiency to be increased. This paper presents the results of our investigation determining the spectral dispersion of optical constants in a wavelength range of 190–1700 nm by using spectroscopic ellipsometry (SE). Furthermore, we show the temperature dependence of the refractive indices of polythiophene films for a heating and a cooling process in the temperature range 25–130 °C. Additionally, thermo-optic coefficients and an optical gap were established and are presented in the paper, followed by a discussion on the conditions of the thermal stability of polythiophene blends and reversibility issues in thermal processes. Our paper presents a new and fresh analysis of depolarization beams after their reflection from the studied films. The paper presents the results of thermo-optical studies of polymer blends which have not been included in previously published works
Photo- and Electroluminescent Properties of Polymethacrylates with Carbazolyl and Fluorescent Pendant Groups
Dicyanovinyl End-Capped 9,10-Bis (Phenylethynyl) Anthracenes for Organic Solar Cells
A series of 9,10-bis(phenylethynyl)anthracene dicyanovinyl end-capped derivatives have been used in bulk heterojunction (BHJ) photovoltaic cells prepared by the solution process. The compounds were excessively decorated with moieties enhancing solubility to avoid spontaneous crystallisations in the blends. The topology of the dyes is of the acceptor-donor-acceptor (A-D-A) type. The quantum chemical calculations were done at the B3LYP/6-31G(d) level of theory and HOMO-LUMO levels were calculated. The solar cellsâ configuration was as follows: ITO/PEDOT:PSS/P3HT(P3OT)dyes/Al and parameters characterising them, open-circuit voltage (Voc), short-circuit current density (Jsc), fill factor (FF) and power conversion efficiency (PCE) are presented. Anthracene based A-D-A molecules showed photovoltaic activity with an average power conversion efficiencies (PCE) of 2.7%
Bisphenol A based pyrazoloquinoline dimers as dopants for electroluminescent applications
Investigations of the Optical and Thermal Properties of the Pyrazoloquinoline Derivatives and Their Application for OLED Design
In this study, the photo-optical properties of the series of new 1H-pyrazolo[3,4-b]quinoline derivatives were investigated. Pyrazoloquinoline studies were conducted to explain the electroluminescent effect in organic LEDs. Absorption and photoluminescence spectra for the materials under consideration were examined, and quantum chemical calculations were made. Differential scanning calorimetric and thermogravimetric measurements were carried out for the manufactured materials. The phase situation of the materials was determined, and glassy transitions were detected for three of the investigated materials. Degradation temperatures were obtained. Single-layer luminescent diodes based on the ITO/PEDOT:PSS/active layer/Al scheme were fabricated. Current–voltage and brightness–voltage characteristics of the diodes were determined, ignition voltage was calculated, and electroluminescence types were determined
Investigation of Dye Dopant Influence on Electrooptical and Morphology Properties of Polymeric Acceptor Matrix Dedicated for Ternary Organic Solar Cells
The publication presents the results of investigations of the influence of dye dopant on the electrooptical and morphology properties of a polymeric donor:acceptor mixture. Ternary thin films (polymer:dye:fullerene) were investigated for potential application as an active layer in organic solar cells. The aim of the research is to determine the effect of selected dye materials (dye D131, dye D149, dye D205, dye D358) on the three-component layer and their potential usefulness as an additional donor in ternary cells, based on P3HT donor and PC71BM acceptor. UV–vis spectroscopy studies were performed, and absorption and luminescence spectra were determined. Ellipsometry parameters for single dye and ternary layers have been measured. The analyses were performed using the Raman spectroscopy method, and the Raman spectra of the mixtures and single components have been determined. Organic layers were prepared and studied using scanning electron microscope and atomic force microscope. For dyes, ultraviolet photoelectron spectroscopy and X-ray photoelectron spectroscopy studies were carried out and the ternary system was presented and analyzed in terms of energy bands