Agreeability of ActiGraph and activPal 4™ Measures of Vigorous Activity

Key Words: Accelerometry, activPal 4™, ActiGraph, RPE, HR Introduction: Wearable technologies are consistently used in research to track physical activity and study how it can improve overall health. ActiGraph and activPal are research-grade accelerometers that track activity levels of all intensities in humans. ActivPal has recently improved its technology to measure vigorous activity more accurately to be consistent with the gold standard Actigraph measures. The purpose of this study is to test the agreeability between the vigorous activity measures of the ActiGraph and activPal 4™ devices. Methods: Regular exercisers are being recruited from the KSU Department of Exercise Science and Sports Management to participate. They are fitted with one activPal 4™ on the thigh which will be compared with two ActiGraphs: one worn on the waist and the other worn on the right wrist for three days. Participants record their exercise sessions in an activity diary. Rate of perceived exertion (RPE) and heart rate are also recorded to determine exercise intensity. Exercise is considered vigorous if RPE is 5 or more and if the heart rate is 76% of age-predicted heart rate max or higher. Statistics will include paired t-tests to determine the differences between the means, correlations to determine strength of agreement, and Bland Altman plots for inter-device agreement. Results: Data collection is currently underway, and findings will be presented at the KSU Symposium for Student Scholars. Conclusions: This study will determine the level of agreeability between the ActiGraph and activPal 4™ measures during vigorous activity. It will provide information about whether ActivPal 4 is acceptable to use for measuring vigorous activity in humans

The JWST Resolved Stellar Populations Early Release Science Program VI. Identifying Evolved Stars in Nearby Galaxies

We present an investigation of evolved stars in the nearby star-forming galaxy WLM, using NIRCam imaging from the JWST resolved stellar populations early-release science (ERS) program. We find that various combinations of the F090W, F150W, F250M, and F430M filters can effectively isolate red supergiants (RSGs) and thermally-pulsing asymptotic giant branch (TP-AGB) stars from one another, while also providing a reasonable separation of the primary TP-AGB subtypes: carbon-rich C-type stars and oxygen-rich M-type stars. The classification scheme we present here agrees very well with the well-established Hubble Space Telescope (HST) medium-band filter technique. The ratio of C to M-type stars (C/M) is 0.8$\pm$0.1 for both the new JWST and the HST classifications, which is within one sigma of empirical predictions from optical narrow-band CN and TiO filters. The evolved star colors show good agreement with the predictions from the PARSEC$+$COLIBRI stellar evolutionary models, and the models indicate a strong metallicity dependence that makes stellar identification even more effective at higher metallicity. However, the models also indicate that evolved star identification with NIRCam may be more difficult at lower metallicies. We test every combination of NIRCam filters using the models and present additional filters that are also useful for evolved star studies. We also find that $\approx$90\% of the dusty evolved stars are carbon-rich, suggesting that carbonaceous dust dominates the present-day dust production in WLM, similar to the findings in the Magellanic Clouds. These results demonstrate the usefulness of NIRCam in identifying and classifying dust-producing stars without the need for mid-infrared data.Comment: 15 page, 12 figures, submitted to AAS Journal

The JWST Resolved Stellar Populations Early Release Science Program. II. Survey Overview

We present the JWST Resolved Stellar Populations Early Release Science (ERS) program. We obtained 27.5 hr of NIRCam and NIRISS imaging of three targets in the Local Group (Milky Way globular cluster M92, ultrafaint dwarf galaxy Draco II, and star-forming dwarf galaxy WLM), which span factors of similar to 10(5) in luminosity, similar to 10(4) in distance, and similar to 10(5) in surface brightness. We describe the survey strategy, scientific and technical goals, implementation details, present select NIRCam color-magnitude diagrams (CMDs), and validate the NIRCam exposure time calculator (ETC). Our CMDs are among the deepest in existence for each class of target. They touch the theoretical hydrogen-burning limit in M92 (<0.08 M-circle dot; M-F090W similar to +13.6), include the lowest-mass stars observed outside the Milky Way in Draco II (0.09M(circle dot); M-F090W similar to +12.1), and reach similar to 1.5 mag below the oldest main-sequence turnoff in WLM (M-F090W similar to +4.6). The PARSEC stellar models provide a good qualitative match to the NIRCam CMDs, though they are similar to 0.05 mag too blue compared to M92 F090W - F150W data. Our CMDs show detector-dependent color offsets ranging from similar to 0.02 mag in F090W - F150W to similar to 0.1 mag in F277W - F444W; these appear to be due to differences in the zero-point calibrations among the detectors. The NIRCam ETC (v2.0) matches the signal-to-noise ratios based on photon noise in uncrowded fields, but the ETC may not be accurate in more crowded fields, similar to what is known for the Hubble Space Telescope. We release the point-source photometry package DOLPHOT, optimized for NIRCam and NIRISS, for the community

Mechanical design of the optical modules intended for IceCube-Gen2

IceCube-Gen2 is an expansion of the IceCube neutrino observatory at the South Pole that aims to increase the sensitivity to high-energy neutrinos by an order of magnitude. To this end, about 10,000 new optical modules will be installed, instrumenting a fiducial volume of about 8 km3. Two newly developed optical module types increase IceCube’s current sensitivity per module by a factor of three by integrating 16 and 18 newly developed four-inch PMTs in specially designed 12.5-inch diameter pressure vessels. Both designs use conical silicone gel pads to optically couple the PMTs to the pressure vessel to increase photon collection efficiency. The outside portion of gel pads are pre-cast onto each PMT prior to integration, while the interiors are filled and cast after the PMT assemblies are installed in the pressure vessel via a pushing mechanism. This paper presents both the mechanical design, as well as the performance of prototype modules at high pressure (70 MPa) and low temperature (−40∘C), characteristic of the environment inside the South Pole ice

The next generation neutrino telescope: IceCube-Gen2

The IceCube Neutrino Observatory, a cubic-kilometer-scale neutrino detector at the geographic South Pole, has reached a number of milestones in the field of neutrino astrophysics: the discovery of a high-energy astrophysical neutrino flux, the temporal and directional correlation of neutrinos with a flaring blazar, and a steady emission of neutrinos from the direction of an active galaxy of a Seyfert II type and the Milky Way. The next generation neutrino telescope, IceCube-Gen2, currently under development, will consist of three essential components: an array of about 10,000 optical sensors, embedded within approximately 8 cubic kilometers of ice, for detecting neutrinos with energies of TeV and above, with a sensitivity five times greater than that of IceCube; a surface array with scintillation panels and radio antennas targeting air showers; and buried radio antennas distributed over an area of more than 400 square kilometers to significantly enhance the sensitivity of detecting neutrino sources beyond EeV. This contribution describes the design and status of IceCube-Gen2 and discusses the expected sensitivity from the simulations of the optical, surface, and radio components

Sensitivity of IceCube-Gen2 to measure flavor composition of Astrophysical neutrinos

The observation of an astrophysical neutrino flux in IceCube and its detection capability to separate between the different neutrino flavors has led IceCube to constraint the flavor content of this flux. IceCube-Gen2 is the planned extension of the current IceCube detector, which will be about 8 times larger than the current instrumented volume. In this work, we study the sensitivity of IceCube-Gen2 to the astrophysical neutrino flavor composition and investigate its tau neutrino identification capabilities. We apply the IceCube analysis on a simulated IceCube-Gen2 dataset that mimics the High Energy Starting Event (HESE) classification. Reconstructions are performed using sensors that have 3 times higher quantum efficiency and isotropic angular acceptance compared to the current IceCube optical modules. We present the projected sensitivity for 10 years of data on constraining the flavor ratio of the astrophysical neutrino flux at Earth by IceCube-Gen2

Estimating the coincidence rate between the optical and radio array of IceCube-Gen2

The IceCube-Gen2 Neutrino Observatory is proposed to extend the all-flavour energy range of IceCube beyond PeV energies. It will comprise two key components: I) An enlarged 8km3 in-ice optical Cherenkov array to measure the continuation of the IceCube astrophysical neutrino flux and improve IceCube\u27s point source sensitivity above ∼100TeV; and II) A very large in-ice radio array with a surface area of about 500km2. Radio waves propagate through ice with a kilometer-long attenuation length, hence a sparse radio array allows us to instrument a huge volume of ice to achieve a sufficient sensitivity to detect neutrinos with energies above tens of PeV. The different signal topologies for neutrino-induced events measured by the optical and in-ice radio detector - the radio detector is mostly sensitive to the cascades produced in the neutrino interaction, while the optical detector can detect long-ranging muon and tau leptons with high accuracy - yield highly complementary information. When detected in coincidence, these signals will allow us to reconstruct the neutrino energy and arrival direction with high fidelity. Furthermore, if events are detected in coincidence with a sufficient rate, they resemble the unique opportunity to study systematic uncertainties and to cross-calibrate both detector components