Investigation of anti-nociceptive, anti-inflammatory potential and ADMET studies of pure compounds isolated from Isodon rugosus Wall. ex Benth

The strong ethnopharmacological utilization of Isodon rugosus Wall. Ex. Benth is evident in the treatment of several types of pain and inflammation, including toothache, earache, abdominal pain, gastric pain, and generalized body pain and inflammation. Based on this background, the antinociceptive effects of the crude extract, various fractions, and essential oil have been reported previously. In this research work, we isolate and characterize pure bioactive compounds from I. rugosus and evaluate possible mechanisms using various in vivo and in vitro models. The pure compounds were analyzed for analgesic and anti-inflammatory activities through various assays. The column chromatography of the chloroform fraction of I. rugosus led to the identification of two pure compounds, i.e., 1 and 2. Compound 1 demonstrated notable inhibition (62% writhing inhibition, 72.77% COX-2 inhibition, and 76.97% 5-LOX inhibition) and anti-inflammatory potential (>50% paw edema inhibition at various intervals). The possible mechanism involved in antinociception was considered primarily, a concept that has already been elucidated through the application of naloxone (an antagonist of opioid receptors). The involvement of adrenergic receptors was investigated using a hot plate model (an adrenergic receptor antagonist). The strong ethnomedicinal analgesic background of I. rugosus, supported by previous reports and current observations, leads to the conclusion that I. rugosus is a potential source of antinociceptive and anti-inflammatory bioactive compounds. It may be concluded from the results that the isolated analgesic compounds of I. rugosus may be a possible alternative remedy for pain and inflammation management with admirable efficacy and safety profiles

Assessment and Management of Scabies in Primary Care Settings

Scabies is an overlooked tropical illness that yet has significant worldwide effects and lasting health repercussions. The condition is caused by the mite Sarcoptes scabei var. hominis, which is a parasitic organism that dwells on the outer layer of the human skin. Scabies is prevalent in impoverished neighborhoods as a result of the high population density in locations such as nursing homes, correctional facilities, and among homeless and displaced children. Nevertheless, modern nations are also prone to scabies infestations, particularly in cases of institutional outbreaks or mini epidemics occurring after conflict or natural calamities. Scabies diagnosis can be aided by both invasive and noninvasive techniques. This paper reviews assessment diagnosis, and management of scabies in primary health care settings

Effects of Myopathy-causing Mutations on Tropomyosin Structure and Function

Tropomyosin determinants for actin binding have not been identified completely and the nature and position of residues involved in thin filament dynamics has not been established. To date a number of Tropomyosin mutations have been linked to several muscle diseases including cardiomyopathies and skeletal muscle myopathies. In this thesis, we aimed to investigate the following tropomyosin mutations R90G, E163K, R167G, E240K, R244G and M2811 which have been shown to cause several severe skeletal muscle myopathies. We used various structural, biochemical and kinetic methods to assess the impact of these mutations on tropomyosin structure and biochemical properties. Fluorescence emission spectroscopy, and transient kinetics were used to assess the effect of these mutations on the equilibrium distribution and kinetics of transitions between different thin filament regulatory states. Overall the data demonstrated that: 1) all tropomyosin mutations except (E163K, E240K, M2811 and R90GR167G) affected the thermal stability of tropomyosin but not the a-helical coiled coil structure. 2) The size of the cooperative unit n was reduced by all tropomyosin mutations. 3) Tropomyosin mutations did not affect the proportion of thin filaments in the blocked state (at low Ca2+). 4) Tropomyosin mutations did affect the maximum observed rate constant of thin filament transition between the ON and OFF states. 5) Several tropomyosin mutations have affected tropomyosin-troponin binding affinity but none of the mutations had any effect on the actin binding affinity. Overall these results provide insight into the mechanism by which tropomyosin bind actin and troponin, tropomyosin related thin filament cooperativity and allosteric transitions

Numerical Study on the Effect of Deposit Layer on the Minimum Wall Thickness of Boiler Water Tube under Different Operating Conditions

Water wall tube temperature is a major parameter in the steam generator design which has a significant role in keeping the steam generator available. Thus, knowing the tube average temperature in different operating conditions is very important to avoid the causes of tube failures. High temperatures are a major cause of various types of failures, such as overheating, hydrogen damage, thermal stress, etc. Furthermore, deposits on the inner tube wall contribute to such failure by changing the thermal resistance of the tube wall, which causes a significant increase in the tube wall’s average temperature, consequently lowering the allowable stress. Therefore, the model was created by using ANSYS FLUENT (Canonsburg, PA, USA) to determine the wall average water tube wall temperature considering the deposit layer thickness (magnetite). Furthermore, this model was verified. It was found that increasing tube thickness can increase the average tube temperature but combining it with increasing deposit thickness leads to higher temperatures. In other words, the effect of the deposit on the tube with higher thickness is higher than on the tube with lower thickness. By discussing the minimum thickness of the water wall tube, the suitable selection of the tube thickness and courses of action concerning the operating conditions that minimize the potential overheating of water tubes in the furnace section of the boiler can be determined

Quality Perceptions, Expectations, and Individual Characteristics among Adult Patients Visiting Primary Healthcare Centers in Saudi Arabia: A Cross-Sectional Study

Quality is a main concern of primary healthcare centers, and pursuing quality can lead to service improvement as well as affordable healthcare. The purpose of this cross-sectional study was to describe patients’ healthcare quality perceptions and expectations and determine the relationships between them and associated factors. The study was conducted on a convenience sample of 470 patients visiting primary healthcare centers. Data were collected between April and July 2022 using an anonymous questionnaire. Bivariate and multivariate analyses were conducted. Most participants reported high levels of quality perceptions and expectations. Bivariate analyses showed a significant correlation between quality perceptions and expectations. Both being single and having a higher level of education were statistically different in terms of quality perception and expectations, respectively. Further, being single, highly educated, and employed had significant differences in terms of expectations. In regression, primary education and expectations influenced quality perceptions. Marital status, profession, and perception were the only variables that significantly influenced participants’ expectations. Patients’ healthcare quality perceptions and expectations are important for ensuring the efficiency of healthcare services. Primary healthcare centers are the key avenue for disease prevention and early detection. The optimization of primary healthcare centers’ quality and addressing its potential issues should be performed through interdisciplinary teamwork

Using Functionalized Micron-Sized Glass Fibres for the Synergistic Effect of Glass Ionomer on Luting Material

This laboratory experiment was conducted with the objective of augmenting the mechanical properties of glass ionomer cement (GIC) via altering the composition of GIC luting powder through the introduction of micron-sized silanized glass fibres (GFs). Experimental GICs were prepared through the addition of two concentrations of GFs (0.5% and 1.0% by weight) to the powder of commercially available GIC luting materials. The effect of GF in set GIC was internally evaluated using micro-CT while the mechanical attributes such as nano hardness (nH), elastic modulus (EM), compressive strength (CS), and diametral tensile strength (DTS) were gauged. Additionally, the physical properties such as water solubility and sorption, contact angle (CA), and film thickness were evaluated. Reinforced Ketac Cem Radiopaque (KCR) GIC with 0.5 wt.% GF achieved improved nH, EM, CS, and DTS without affecting the film thickness, CA or internal porosity of the set GIC cement. In contrast, both GF-GIC formulations of Medicem (MC) GIC showed the detrimental effect of the GF incorporation. Reinforcing KCR GIC with 0.5 wt.% silanized GFs could improve the physical and mechanical attributes of luting material. Silanized GF, with optimal concentration within the GIC powder, can be used as a functional additive in KCR GIC with promising results

Temperature gradient measurements by using thermoelectric effect in CNTs-silicone adhesive composite.

This work presents the fabrication and investigation of thermoelectric cells based on composite of carbon nanotubes (CNT) and silicone adhesive. The composite contains CNT and silicon adhesive 1∶1 by weight. The current-voltage characteristics and dependences of voltage, current and Seebeck coefficient on the temperature gradient of cell were studied. It was observed that with increase in temperature gradient the open circuit voltage, short circuit current and the Seebeck coefficient of the cells increase. Approximately 7 times increase in temperature gradient increases the open circuit voltage and short circuit current up to 40 and 5 times, respectively. The simulation of experimental results is also carried out; the simulated results are well matched with experimental results

Design, Physical Characterizations, and Biocompatibility of Cationic Solid Lipid Nanoparticles in HCT-116 and 16-HBE Cells: A Preliminary Study

In this study, pEGFP-LUC was used as a model plasmid and three distinct cationic lipids (dioleyloxy-propyl-trimethylammonium chloride [DOTMA], dioleoyl trimethylammonium propane [DOTAP], and cetylpyridinium chloride [CPC]) were tested along with PEG 5000, as a nonionic surfactant, to prepare glyceryl monostearate (GMS)-based cationic solid lipid nanoparticles (cSLNs). Both the type and quantity of surfactant had an impact on the physicochemical characteristics of the cSLNs. Thermal analysis of the greater part of the endothermic peaks of the cSLNs revealed they were noticeably different from the individual pure compounds based on their zeta potential (ZP ranging from +17 to +56 mV) and particle size (PS ranging from 185 to 244 nm). The addition of cationic surfactants was required to produce nanoparticles (NPs) with a positive surface charge. This suggested that the surfactants and extensive entanglement of the lipid matrix GMS provided support for the behavioral diversity of the cSLNs and their capacity to interface with the plasmid DNA. Additionally, hemolytic assays were used to show that the cSLNs were biocompatible with the human colon cancer HCT-116 and human bronchial epithelial 16-HBE cell lines. The DOTMA 6-based cSLN was selected as the lead cSLN for further ex vivo and in vivo investigations. Taken together, these new findings might provide some guidance in selecting surfactants to prepare extremely efficient and non-toxic cSLN-based therapeutic delivery systems (e.g., gene therapy)

Seasonal influenza vaccination among primary health care workers in Southwestern Saudi Arabia

Background: Vaccination of primary healthcare workers (PHCWs) help to prevent the spread of influenza among at-risk patients. Objectives: To assesses seasonal influenza vaccination (SIV) coverage and the factors affecting SIV’s utilization among PHCWs in Abha city, southwestern Saudi Arabia. Methods: A cross-sectional survey was carried out between June 2018 and August 2018 in all primary healthcare centers in Abha city. It targeted physicians, nurses, technicians, and pharmacists. A self-administered questionnaire was used to collect data regarding SIV status during the 2017–2018 season, obtain knowledge regarding SIV and influenza disease, and identify potential motivators for and barriers to SIV. Results: Of 312 PHCWs, the SIV coverage rate was 45.5% in the 2017–2018 vaccination season. A multivariable logistic regression model showed that the risk groups for non-vaccination were PHCWs less than 40 years old (adjusted Odds Ratio (aOR) = 4.07, 95% CI: 1.50–11.03), technicians (aOR = 3.73, 95% CI: 1.20–11.54), single PHCWs (aOR = 2.36, 95% CI:1.20–4.62), and PHCWs lacking adequate influenza vaccine knowledge (aOR = 4.22, 95% CI: 2.13–8.35). Approximately 23% and 32% of PHCWs were found to have inadequate knowledge about SIV and influenza disease, respectively. PHCWs’ awareness about their risk of infection and their need for protection was found to be the most common motivator (77.5%), and a fear of side effects was found to be the most frequent barrier (40%). Conclusion: SIV coverage rate is suboptimal. Knowledge gaps and misconceptions about the influenza vaccine are the main barriers to an adequate coverage

Synthesis, Characterization and Bio-Potential Activities of Co(II) and Ni(II) Complexes with O and N Donor Mixed Ligands

The synthesis and characterization of Co(II) and Ni(II) mixed ligand complexes are derived from isoniazid, 9-fluorenoneandoxalate. The metal complexes were characterized on the basis of elemental analysis, IR, UV-visible, CV, PXRD, and molar conductance analytical data, viz., all the metal complexes were suggested in an octahedral geometry, respectively. The mixed ligand complexes are formed in the 1:1:2:1 (M:L1:L2:L3) ratios, as found from the elemental analyses, and originate to have the formula [M(L1)(L2)2(L3)]. Where M = Co(II), Ni(II), L1 = isoniazid, L2 = 9-fluorenone, and L3 = oxalate. The molar conductance data reveals that the complexes are non-electrolytes. The cyclic voltammogram of the Co(II) complex revealed that the quasi-reversible single electron transfer process and Ni(II) complex corresponding to a one-electron transfer process were observed during controlled potential electrolysis. IR spectra show that the ligands are coordinated to the metal ions through N and O donor sites of isoniazid-N, 9-fluorenone-O and oxalate-O. Magnetic moment values and UV-visible spectra were used to infer the coordinating of the geometrics of these complexes found to be octahedral. The PXRD patterns suggest that all the complexes are crystalline phases. The metal chelates have been screened for antimicrobial, antioxidant and anti-inflammatory activities, and our findings have been reported, explained and compared with some known antibiotics