Flexibility of industrial product service systems: An assessment based on concept modelling

--

Extracorporeal immune therapy with immobilized agonistic anti-Fas antibodies leads to transient reduction of circulating neutrophil numbers and limits tissue damage after hemorrhagic shock/resuscitation in a porcine model

Background: Hemorrhagic shock/resuscitation is associated with aberrant neutrophil activation and organ failure. This experimental porcine study was done to evaluate the effects of Fas-directed extracorporeal immune therapy with a leukocyte inhibition module (LIM) on hemodynamics, neutrophil tissue infiltration, and tissue damage after hemorrhagic shock/resuscitation. Methods: In a prospective controlled double-armed animal trial 24 Munich Mini Pigs (30.3 +/- 3.3 kg) were rapidly haemorrhaged to reach a mean arterial pressure (MAP) of 35 +/- 5 mmHg, maintained hypotensive for 45 minutes, and then were resuscitated with Ringer's solution to baseline MAP. With beginning of resuscitation 12 pigs underwent extracorporeal immune therapy for 3 hours (LIM group) and 12 pigs were resuscitated according to standard medical care (SMC). Haemodynamics, haematologic, metabolic, and organ specific damage parameters were monitored. Neutrophil infiltration was analyzed histologically after 48 and 72 hours. Lipid peroxidation, and apoptosis were specifically determined in lung, bowel, and liver. Results: In the LIM group, neutrophil counts were reduced versus SMC during extracorporeal immune therapy. After 72 hours, the haemodynamic parameters MAP and cardiac output (CO) were significantly better in the LIM group. Histological analyses showed reduction of shock-related neutrophil tissue infiltration in the LIM group, especially in the lungs. Lower amounts of apoptotic cells and lipid peroxidation were found in organs after LIM treatment. Conclusions: Transient Fas-directed extracorporeal immune therapy may protect from posthemorrhagic neutrophil tissue infiltration and tissue damage

The UK resuscitative endovascular balloon occlusion of the aorta in trauma patients with life-threatening torso haemorrhage : The (UK-REBOA) multicentre RCT

Peer reviewe

The UK resuscitative endovascular balloon occlusion of the aorta in trauma patients with life-threatening torso haemorrhage: the (UK-REBOA) multicentre RCT

Background The most common cause of preventable death after injury is haemorrhage. Resuscitative endovascular balloon occlusion of the aorta is intended to provide earlier, temporary haemorrhage control, to facilitate transfer to an operating theatre or interventional radiology suite for definitive haemostasis. Objective To compare standard care plus resuscitative endovascular balloon occlusion of the aorta versus standard care in patients with exsanguinating haemorrhage in the emergency department. Design Pragmatic, multicentre, Bayesian, group-sequential, registry-enabled, open-label, parallel-group randomised controlled trial to determine the clinical and cost-effectiveness of standard care plus resuscitative endovascular balloon occlusion of the aorta, compared to standard care alone. Setting United Kingdom Major Trauma Centres. Participants Trauma patients aged 16 years or older with confirmed or suspected life-threatening torso haemorrhage deemed amenable to adjunctive treatment with resuscitative endovascular balloon occlusion of the aorta. Interventions Participants were randomly assigned 1 : 1 to: standard care, as expected in a major trauma centre standard care plus resuscitative endovascular balloon occlusion of the aorta. Main outcome measures Primary: Mortality at 90 days. Secondary: Mortality at 6 months, while in hospital, and within 24, 6 and 3 hours; need for haemorrhage control procedures, time to commencement of haemorrhage procedure, complications, length of stay (hospital and intensive care unit-free days), blood product use. Health economic: Expected United Kingdom National Health Service perspective costs, life-years and quality-adjusted life-years, modelled over a lifetime horizon. Data sources Case report forms, Trauma Audit and Research Network registry, NHS Digital (Hospital Episode Statistics and Office of National Statistics data). Results Ninety patients were enrolled: 46 were randomised to standard care plus resuscitative endovascular balloon occlusion of the aorta and 44 to standard care. Mortality at 90 days was higher in the standard care plus resuscitative endovascular balloon occlusion of the aorta group (54%) compared to the standard care group (42%). The odds ratio was 1.58 (95% credible interval 0.72 to 3.52). The posterior probability of an odds ratio > 1 (indicating increased odds of death with resuscitative endovascular balloon occlusion of the aorta) was 86.9%. The overall effect did not change when an enthusiastic prior was used or when the estimate was adjusted for baseline characteristics. For the secondary outcomes (3, 6 and 24 hours mortality), the posterior probability that standard care plus resuscitative endovascular balloon occlusion of the aorta was harmful was higher than for the primary outcome. Additional analyses to account for intercurrent events did not change the direction of the estimate for mortality at any time point. Death due to haemorrhage was more common in the standard care plus resuscitative endovascular balloon occlusion of the aorta group than in the standard care group. There were no serious adverse device effects. Resuscitative endovascular balloon occlusion of the aorta is less costly (probability 99%), due to the competing mortality risk but also substantially less effective in terms of lifetime quality-adjusted life-years (probability 91%). Limitations The size of the study reflects the relative infrequency of exsanguinating traumatic haemorrhage in the United Kingdom. There were some baseline imbalances between groups, but adjusted analyses had little effect on the estimates. Conclusions This is the first randomised trial of the addition of resuscitative endovascular balloon occlusion of the aorta to standard care in the management of exsanguinating haemorrhage. All the analyses suggest that a strategy of standard care plus resuscitative endovascular balloon occlusion of the aorta is potentially harmful. Future work The role (if any) of resuscitative endovascular balloon occlusion of the aorta in the pre-hospital setting remains unclear. Further research to clarify its potential (or not) may be required. Trial registration This trial is registered as ISRCTN16184981. Funding This award was funded by the National Institute for Health and Care Research (NIHR) Health Technology Assessment programme (NIHR award ref: 14/199/09) and is published in full in Health Technology Assessment; Vol. 28, No. 54. See the NIHR Funding and Awards website for further award information

Impact of opioid-free analgesia on pain severity and patient satisfaction after discharge from surgery: multispecialty, prospective cohort study in 25 countries

Background: Balancing opioid stewardship and the need for adequate analgesia following discharge after surgery is challenging. This study aimed to compare the outcomes for patients discharged with opioid versus opioid-free analgesia after common surgical procedures.Methods: This international, multicentre, prospective cohort study collected data from patients undergoing common acute and elective general surgical, urological, gynaecological, and orthopaedic procedures. The primary outcomes were patient-reported time in severe pain measured on a numerical analogue scale from 0 to 100% and patient-reported satisfaction with pain relief during the first week following discharge. Data were collected by in-hospital chart review and patient telephone interview 1 week after discharge.Results: The study recruited 4273 patients from 144 centres in 25 countries; 1311 patients (30.7%) were prescribed opioid analgesia at discharge. Patients reported being in severe pain for 10 (i.q.r. 1-30)% of the first week after discharge and rated satisfaction with analgesia as 90 (i.q.r. 80-100) of 100. After adjustment for confounders, opioid analgesia on discharge was independently associated with increased pain severity (risk ratio 1.52, 95% c.i. 1.31 to 1.76; P < 0.001) and re-presentation to healthcare providers owing to side-effects of medication (OR 2.38, 95% c.i. 1.36 to 4.17; P = 0.004), but not with satisfaction with analgesia (beta coefficient 0.92, 95% c.i. -1.52 to 3.36; P = 0.468) compared with opioid-free analgesia. Although opioid prescribing varied greatly between high-income and low- and middle-income countries, patient-reported outcomes did not.Conclusion: Opioid analgesia prescription on surgical discharge is associated with a higher risk of re-presentation owing to side-effects of medication and increased patient-reported pain, but not with changes in patient-reported satisfaction. Opioid-free discharge analgesia should be adopted routinely

Conceptual Development of Industrial Product-Service Systems - A model-based Approach

The increasing competitiveness of today’s globalised economies and changing customer requirements prompt manufacturers to provide integrated product and service solutions, referred to as Industrial Product-Service Systems (IPS²). An IPS² constitutes a customised solution, whereas providing performance is set above the purchase of a mere technical product. It can comprise any combination of product and service shares. Once such an offer is planned, the IPS² concept development phase generates principle solutions that meet customerspecific requirements. This article presents a model-based methodology to support an IPS² designer during the process of generating IPS² concepts in the early phase of IPS² development. This methodical framework and the modelling approach for conceptual IPS² development has been implemented as a computer-aided tool and has been evaluated by solving a typical IPS² issue

Datentechnische Integration und Visualisierung von Anforderungen innerhalb von CAD-Systemen

Ein wesentliches Ziel der Produktentwicklungsprozesse ist die fortlaufende Reduzierung der Komplexität ohne wichtige Merkmale aus den Augen zu verlieren. Weiterhin zeichnet sich die virtuelle Produktentwicklung durch eine durchgängige Integration verschiedener Produktinformationen und Produktmodelle aus, wobei dem Gestaltmodell in Form von CAD-Daten eine zentrale Bedeutung zukommt. Dabei basieren diese CAD-Systeme jedoch nicht oder nur zum Teil auf den Grundprinzipien der Konstruktionsmethodik, so dass die vor dem Entwurf entstandenen Informationen nur schwer mit dem Gestaltmodell verknüpft werden können. Am Beispiel der Anforderungsentwicklung wird in dieser Arbeit ein CAD-integriertes Werkzeug vorgestellt, dass es dem Konstrukteur ermöglicht, Anforderungen direkt im CAD-System zu erfassen und mit dem Geometrie-Modell zu verknüpfen. Neben der datentechnischen Integration wird auch eine Visualisierung von Anforderungen im CAD-System erstellt. Diese unterstützt den Konstrukteur, um die Vielzahl von abstrakten Informationen zu Baugruppen, Bauteilen und Features zuordnen zu können, was die Qualität und Konsistenz der erzeugten Modelle erhöht