Intrinsic innervation and dopaminergic markers after experimental denervation in rat thymus

The aim of this study was to examine rat thymus innervation using denervation techniques and to explore the related micro-anatomical localization of dopamine, D1, D2 receptors and dopamine membrane transporter (DAT). In the thymus subcapsular region, the parenchymal cholinergic fibers belong exclusively to phrenic nerve branching. No somatic phrenic nerve branching was detected in any other analysed thymus lobule regions. In rats subjected to sympathetic or parasympathetic ablation, it was observed that catecholaminergic and cholinergic nerve fibers respectively contributed to forming plexuses along vessel walls. In the subcapsular and septal region, no parenchymal nerve branching, belonging to sympathetic or parasympathetic nervous system was noted. Instead, in the deep cortical region, cortico-medullary junction (CM-j) and medulla, catecholaminergic and cholinergic nerve fibers were detected along the vessels and parenchyma. Dopamine and dopamine receptors were widely diffused in the lobular cortico-medullary junction region and in the medulla, where the final steps of thymocyte maturation and their trafficking take place. No variation in dopamine and DAT immune reaction was observed following total or partial parasympathectomy or phrenic nerve cutting. After chemical or surgical sympathectomy however, neither dopamine nor DAT immune reaction was noted again. Instead, D1 and D2 dopamine receptor expression was not affected by thymus denervation. In rats subjected to specific denervation, it was observed the direct intraparenchymal branching of the phrenic nerve and sympathetic and parasympathetic fibers into thymus parenchyma along vessels. These findings on the dopaminergic system highlight the importance of neurotransmitter receptor expression in the homeostasis of neuroimmune modulation

3D Bioprinting of Gelatin–Xanthan Gum Composite Hydrogels for Growth of Human Skin Cells

In recent years, bioprinting has attracted much attention as a potential tool for generating complex 3D biological constructs capable of mimicking the native tissue microenvironment and promoting physiologically relevant cell–cell and cell–matrix interactions. The aim of the present study was to develop a crosslinked 3D printable hydrogel based on biocompatible natural polymers, gelatin and xanthan gum at different percentages to be used both as a scaffold for cell growth and as a wound dressing. The CellInk Inkredible 3D printer was used for the 3D printing of hydrogels, and a glutaraldehyde solution was tested for the crosslinking process. We were able to obtain two kinds of printable hydrogels with different porosity, swelling and degradation time. Subsequently, the printed hydrogels were characterized from the point of view of biocompatibility. Our results showed that gelatin/xanthan-gum bioprinted hydrogels were biocompatible materials, as they allowed both human keratinocyte and fibroblast in vitro growth for 14 days. These two bioprintable hydrogels could be also used as a helpful dressing material

Migraine and cluster headache show impaired neurosteroids patterns

Background: Perturbation of neuronal excitability contributes to migraine. Neurosteroids modulate the activity of γ-aminobutyric acid A and N-methyl-d-aspartate receptors, and might be involved in the pathogenesis of migraine. Here, we measured plasma levels of four neurosteroids, i.e., allopregnanolone, epiallopregnanolone, dehydroepiandrosterone and deydroepiandrosterone sulfate, in patients affected by episodic migraine, chronic migraine, or cluster headache. Methods: Nineteen female patients affected by episodic migraine, 51 female patients affected by chronic migraine, and 18 male patients affected by cluster headache were recruited to the study. Sex- and age-matched healthy control subjects (31 females and 16 males) were also recruited. Patients were clinically characterized by using validated questionnaires. Plasma neurosteroid levels were measured by liquid chromatography-tandem mass spectrometry. Results: We found disease-specific changes in neurosteroid levels in our study groups. For example, allopregnanolone levels were significantly increased in episodic migraine and chronic migraine patients than in control subjects, whereas they were reduced in patients affected by cluster headache. Dehydroepiandrosterone and dehydroepiandrosterone sulfate levels were reduced in patients affected by chronic migraine, but did not change in patients affected by cluster headache. Conclusion: We have shown for the first time that large and disease-specific changes in circulating neurosteroid levels are associated with chronic headache disorders, raising the interesting possibility that fluctuations of neurosteroids at their site of action might shape the natural course of migraine and cluster headache. Whether the observed changes in neurosteroids are genetically determined or rather result from exposure to environmental or intrinsic stressors is unknown. This might also be matter for further investigation because stress is a known triggering factor for headache attacks in both migraineurs and cluster headache patients

Conceptual design of electron beam diagnostics for high brightness plasma accelerator

A design study of the diagnostics of a high brightness linac, based on X-band structures, and a plasma accelerator stage, has been delivered in the framework of the EuPRAXIA@SPARC_LAB project. In this paper, we present a conceptual design of the proposed diagnostics, using state of the art systems and new and under development devices. Single shot measurements are preferable for plasma accelerated beams, including emittance, while $\mu$m level and fs scale beam size and bunch length respectively are requested. The needed to separate the driver pulse (both laser or beam) from the witness accelerated bunch imposes additional constrains for the diagnostics. We plan to use betatron radiation for the emittance measurement just at the end of the plasma booster, while other single-shot methods must be proven before to be implemented. Longitudinal measurements, being in any case not trivial for the fs level bunch length, seem to have already a wider range of possibilities

The pricing behaviour of firms in the euro area : new survey evidence

This study investigates the pricing behaviour of firms in the euro area on the basis of surveys conducted by nine Eurosystem national central banks. Overall, more than 11,000 firms participated in the survey. The results are very robust across countries. Firms operate in monopolistically competitive markets, where prices are mostly set following mark-up rules and where price discrimination is a common practice. Our evidence suggests that both time- and state-dependent pricing strategies are applied by firms in the euro area: around one-third of the companies follow mainly time-dependent pricing rules while two-thirds use pricing rules with some element of state-dependence. Although the majority of firms take into account a wide range of information, including past and expected economic developments, about one-third adopts a purely backward-looking behaviour. The pattern of results lends support to the recent wave of estimations of hybrid versions of the New Keynesian Phillips Curve. Price stickiness arises both at the stage when firms review their prices and again when they actually change prices. The most relevant factors underlying price rigidity are customer relationships - as expressed in the theories about explicit and implicit contracts - and thus, are mainly found at the price changing (second) stage of the price adjustment process. Finally, we provide evidence that firms adjust prices asymmetrically in response to shocks, depending on the direction of the adjustment and the source of the shock: while cost shocks have a greater impact when prices have to be raised than when they have to be reduced, reductions in demand are more likely to induce a price change than increases in demand.price setting, nominal rigidity, real rigidity, inflation persistence, survey data.

A RANDOMIZED, DOUBLE-BLIND, CROSS-OVER STUDY COMPARING A LEVOSULPIRIDE-BASED AND A METOCLOPRAMIDE-BASED COMBINATION IN THE PREVENTION OF PROMECE-CYTABOM-INDUCED EMESIS

Background. To test two different antiemetic regimens for preventing nausea and vomiting in patients with non-Hodgkin's lymphoma (NHL) undergoing systemic chemotherapy (CT) with ProMECE-CytaBOM (P-C). Patients and Methods. Twenty consecutive untreated adult outpatients with histologically confirmed NHL and scheduled to receive P-C chemotherapy were registered in a randomized, double-blind, cross-over study to compare the antiemetic efficacy of a levosulpiride (LS)-based and metoclopramide (MTC)-based regimen. Results. Complete protection from vomiting was recorded in 93% (62/67) of courses with the LS-regimen and in 89% (62/70) with the MTC-regimen (p = 0.428). No nausea was observed in 84% (56/67) of courses with the LS-regimen and in 74% (52/70) with the MTC-regimen (p = 0.183). No differences in prevention of emesis were recorded when patients crossed to the other regimen. Both regimens were well tolerated; however, on day 8 of chemotherapy, when both antiemetic regimens were administered at a higher dose, the LS-based combination showed significantly lower toxicity (p = 0.035). Conclusions. ProMECE-CytaBOM-induced emesis can be prevented in most cases with appropriate, specifically designed antiemetic therapy. Both the LS- and MTC-based combinations resulted in a high percentage of complete protection from emesis, but the higher incidence of side effects observed with MTC makes the LS-based regimen preferable for patients receiving P-C chemotherapy

A first assessment of genetic variability in the longhorn beetle Rosalia alpina (Coleoptera: Cerambycidae) from the Italian Apennines

The Rosalia longicorn (Rosalia alpina) is a strictly protected saproxylic beetle, widely distributed in Central and Southern Europe and mainly associated with ancient beech forests. To improve knowledge about the conservation status of R. alpina in Italy, available molecular markers (microsatellites and mitochondrial cytochrome c oxidase I(COI)) were tested for the first time on Italian populations. The study was performed in four sampling sites distributed in two areas placed in Northern (“Foreste Casentinesi” National Park) and Central Apennines (“Abruzzo, Lazio and Molise” National Park) where populational data about Rosalia longicorn were collected in the framework of the European LIFE MIPP Project. The genetic relationship among Apennine and Central/South-eastern European populations was explored by a comparison with mitochondrial DNA (mtDNA) data from literature. Microsatellite markers were only partially informative when applied to R. alpina Italian individuals, although providing some preliminary indication on an extensive gene flow among populations from the Apennines and local ongoing processes of genetic erosion. Genetic data are consistent with previous ecological data suggesting that the maintenance of variability in this species could be related to both habitat continuity and preservation of large senescent or standing dead trees in forests. Finally, a peculiar origin of the Apennine populations of R. alpina from a putative “Glacial Refugium” in Italy was inferred through COI data. The high genetic distance scored among the analysed populations and those from Central and South-eastern Europe indicates that the R. alpina deme from Apennine Mountains might represent a relevant conservation unit in Europe. Further genetic analyses will allow assessing other possible conservation units of R. alpina and, thus, defining large-scale conservation strategies to protect this endangered longhorn beetle in Europe

An overview of natural polymers as reinforcing agents for 3D printing

Three-dimensional (3D) printing, or additive manufacturing, is a group of innovative technologies that are increasingly employed for the production of 3D objects in different fields, including pharmaceutics, engineering, agri-food and medicines. The most processed materials by 3D printing techniques (e.g., fused deposition modelling, FDM; selective laser sintering, SLS; stereolithography, SLA) are polymeric materials since they offer chemical resistance, are low cost and have easy processability. However, one main drawback of using these materials alone (e.g., polylactic acid, PLA) in the manufacturing process is related to the poor mechanical and tensile properties of the final product. To overcome these limitations, fillers can be added to the polymeric matrix during the manufacturing to act as reinforcing agents. These include inorganic or organic materials such as glass, carbon fibers, silicon, ceramic or metals. One emerging approach is the employment of natural polymers (polysaccharides and proteins) as reinforcing agents, which are extracted from plants or obtained from biomasses or agricultural/industrial wastes. The advantages of using these natural materials as fillers for 3D printing are related to their availability together with the possibility of producing printed specimens with a smaller environmental impact and higher biodegradability. Therefore, they represent a “green option” for 3D printing processing, and many studies have been published in the last year to evaluate their ability to improve the mechanical properties of 3D printed objects. The present review provides an overview of the recent literature regarding natural polymers as reinforcing agents for 3D printing

Double cropping in Vitis vinifera L. cv. Pinot Noir: agronomical and physiological validation

n/