Generation of propagating spin waves from regions of increased dynamic demagnetising field near magnetic antidots

Journal article and accompanying data and mediaThe article appeared in Applied Physics Letters 107, 162401 (2015); doi: 10.1063/1.4933263 and may be found at http://dx.doi.org/10.1063/1.4933263We have used Brillouin Light Scattering and micromagnetic simulations to demonstrate a point-like source of spin waves created by the inherently nonuniform internal magnetic field in the vicinity of an isolated antidot formed in a continuous film of yttrium-iron-garnet. The field nonuniformity ensures that only well-defined regions near the antidot respond in resonance to a continuous excitation of the entire sample with a harmonic microwave field. The resonantly excited parts of the sample then served as reconfigurable sources of spin waves propagating (across the considered sample) in the form of caustic beams. Our findings are relevant to further development of magnonic circuits, in which point-like spin wave stimuli could be required, and as a building block for interpretation of spin wave behavior in magnonic crystals formed by antidot arrays.Engineering and Physical Sciences Research Council (EPSRC)Russian Foundation for Basic ResearchRussian Science FoundationScholarship of the President of Russian Federatio

Field-Controlled Phase-Rectified Magnonic Multiplexer

This is the author accepted manuscript. The final version is available from IEEE via the DOI in this record.The article plus associated .mif files is in ORE: http://hdl.handle.net/10871/18265The mechanism used to alter the features of propagating spin waves is a key component underpinning the functionality of high-frequency magnonic devices. Here, using experiment and micromagnetic simulations, we demonstrate the feasibility of a magnonic multiplexer in which the spin-wave beam is toggled between device output branches by the polarity of a small global bias magnetic field. Due to the anisotropy inherent in the dispersion of magnetostatic spin waves, the phase fronts of the output spin waves are asymmetrically tilted relative to the direction of the beam propagation (group velocity). We show how the phase tilts could be (partly) rectified in the magnonic waveguides of variable widths.This work was supported in part by the U.K. Engineering and Physical Sciences Research Council under Project EP/L019876/1 and Project EP/P505526/1, in part by the Russian Science Foundation under Project 14–19-00760, in part by the Scholarship of the President of Russian Federation (SP-313.2015.5), and in part by the Russian Foundation under Projects 14-07-00273 and 15-37-51253

Erratum: Towards graded-index magnonics: Steering spin waves in magnonic networks [Phys. Rev. B 92, 020408(R) (2015)]

This is the final version of the article. Available from the American Physical Societ via the DOI in this record.This is the erratum to 'Towards graded-index magnonics: Steering spin waves in magnonic networks'. Physical Review B 92, 020408(R), 20 July 2015. DOI: https://doi.org/10.1103/PhysRevB.92.020408The article for which this is the erratum is in ORE: http://hdl.handle.net/10871/26167-The research leading to these results has received funding from the European Community's Seventh Framework Programme (FP7/2007-2013) under Grant Agreement No. 247556 (NoWaPhen), from the Engineering and Physical Sciences Research Council of the United Kingdom under Projects No. EP/L019876/1 and No. EP/L020696/1, from Russian Science Foundation (Project No. 14-19-00760), and the Scholarship of the President of Russian Federation (SP-313.2015.5)

Magnonic beam splitter: The building block of parallel magnonic circuitry

We demonstrate a magnonic beam splitter that works by inter-converting magnetostatic surface and backward-volume spin waves propagating in orthogonal sections of a T-shaped yttrium iron garnet structure. The inter-conversion is enabled by the overlap of the surface and volume spin wave bands. This overlap results from the demagnetising field induced along the transversely magnetised section(-s) of the structure and the quantization of the transverse wave number of the propagating spin waves (which are therefore better described as waveguide modes). In agreement with numerical micromagnetic simulations, our Brillouin light scattering imaging experiments reveal that, depending on the frequency, the incident fundamental waveguide magnonic modes may also be converted into higher order waveguide modes. The magnonic beam splitter demonstrated here is an important step towards the development of parallel logic circuitry of magnonics.The research leading to these results has received funding from the Russian Foundation for Basic Research (Project No. 14-07-00273), the Grant from Russian Science Foundation (Project No. 14-19-00760), the Scholarship of the President of Russian Federation (SP-313.2015.5), and from the Engineering and Physical Sciences Research Council of the United Kingdom (Project Nos. EP/L019876/1 and EP/P505526/1)

Imaging with therapeutic acoustic wavelets–short pulses enable acoustic localization when time of arrival is combined with delay and sum

—Passive acoustic mapping (PAM) is an algorithm that reconstructs the location of acoustic sources using an array of receivers. This technique can monitor therapeutic ultrasound procedures to confirm the spatial distribution and amount of microbubble activity induced. Current PAM algorithms have an excellentlateral resolution but have a poor axial resolution, making it difficult to distinguish acoustic sources within the ultrasound beams. With recent studies demonstrating that short-length and low-pressure pulses—acoustic wavelets—have the therapeutic function, we hypothesizedthat the axial resolution could be improved with a quasi-pulse-echo approach and that the resolution improvement would depend on the wavelet’s pulse length. This article describes an algorithm that resolves acoustic sources axially using time of flight and laterally using delayand-sum beamforming, which we named axial temporal position PAM (ATP-PAM). The algorithm accommodates a rapid short pulse (RaSP) sequence that can safely deliver drugs across the blood–brain barrier. We developed our algorithm with simulations (k-wave) and in vitro experiments for one-, two-, and five-cycle pulses, comparing our resolution against that of two current PAM algorithms. We then tested ATP-PAM in vivo and evaluated whether the reconstructed acoustic sources mapped to drug deliver

Layered Structures of Ti-6Al-4V Alloy and Metal Matrix Composites on Its Base Joint by Diffusion Bonding and Friction Welding

Metallic layered structures demonstrate an advanced set of characteristics that combine different properties not found within homogenous bulk materials. Powder metallurgy (PM) is proven to be the most efficient way of fabrication of layered structures, including highly rated structures of Ti alloys. Residual porosity, however, remains one of the biggest problems of titanium-based PM products and this can adversely affect the mechanical properties and performance of the structural parts. Post-sintering hot deformation is a common way to control the porosity of metallic materials. Traditional thermomechanical processing like hot rolling, however, could not be applied on multi-layered structures due to the disparity of the different layers’ plastic flow. Separate processing of high performance individual layers to reach their best parameters, followed by post processing bonding of the mating subcomponents is a credible pathway for fabrication of the layered materials with highly optimized properties of each individual layer. In this study we used diffusion bonding (DB) and friction welding to join the parts made of Ti-6Al-4V alloy and metal matrix composites on the base of this alloy reinforced with 10% of either TiB or TiC. Parts were fabricated using blended elemental PM. Different protocols were used to join the materials: DB welding via rotational friction (RFW) and linear friction (LFW) as well as different geometries of mating subcomponents were tested. Structure characterization of the joints using light optical microscopy, SEM, EDS, EBSD as well as mechanical tests were performed. All used protocols were generally successful in bonding the parts made of Ti-64 alloy and composites on its base. The potential of DB, RFW and LFW of Ti-6Al-4V alloy and its MMC are discussed

Phenotypic and molecular assessment of seven patients with 6p25 deletion syndrome: Relevance to ocular dysgenesis and hearing impairment

BACKGROUND: Thirty-nine patients have been described with deletions involving chromosome 6p25. However, relatively few of these deletions have had molecular characterization. Common phenotypes of 6p25 deletion syndrome patients include hydrocephalus, hearing loss, and ocular, craniofacial, skeletal, cardiac, and renal malformations. Molecular characterization of deletions can identify genes that are responsible for these phenotypes. METHODS: We report the clinical phenotype of seven patients with terminal deletions of chromosome 6p25 and compare them to previously reported patients. Molecular characterization of the deletions was performed using polymorphic marker analysis to determine the extents of the deletions in these seven 6p25 deletion syndrome patients. RESULTS: Our results, and previous data, show that ocular dysgenesis and hearing impairment are the two most highly penetrant phenotypes of the 6p25 deletion syndrome. While deletion of the forkhead box C1 gene (FOXC1) probably underlies the ocular dysgenesis, no gene in this region is known to be involved in hearing impairment. CONCLUSIONS: Ocular dysgenesis and hearing impairment are the two most common phenotypes of 6p25 deletion syndrome. We conclude that a locus for dominant hearing loss is present at 6p25 and that this locus is restricted to a region distal to D6S1617. Molecular characterization of more 6p25 deletion patients will aid in refinement of this locus and the identification of a gene involved in dominant hearing loss

The Dynamics of Health and Return Migration

In the final article in a six-part PLoS Medicine; series on Migration & Health, Anita Davies and colleagues from the International Organization for Migration (IOM) discuss the specific health risks and policy needs associated with return migratio

Prevalence and Predictors of Vitamin D Insufficiency in Children: A Great Britain Population Based Study

Objectives To evaluate the prevalence and predictors of vitamin D insufficiency (VDI) in children In Great Britain. Design A nationally representative cross-sectional study survey of children (1102) aged 4–18 years (999 white, 570 male) living in private households (January 1997–1998). Interventions provided information about dietary habits, physical activity, socio-demographics, and blood sample. Outcome measures were vitamin D insufficiency (<50 nmol/L). Results Vitamin D levels (mean = 62.1 nmol/L, 95%CI 60.4–63.7) were insufficient in 35%, and decreased with age in both sexes (p<0.001). Young People living between 53–59 degrees latitude had lower levels (compared with 50–53 degrees, p = 0.045). Dietary intake and gender had no effect on vitamin D status. A logistic regression model showed increased risk of VDI in the following: adolescents (14–18 years old), odds ratio (OR) = 3.6 (95%CI 1.8–7.2) compared with younger children (4–8 years); non white children (OR = 37 [95%CI 15–90]); blood levels taken December-May (OR = 6.5 [95%CI 4.3–10.1]); on income support (OR = 2.2 [95%CI 1.3–3.9]); not taking vitamin D supplementation (OR = 3.7 [95%CI 1.4–9.8]); being overweight (OR 1.6 [95%CI 1.0–2.5]); <1/2 hour outdoor exercise/day/week (OR = 1.5 [95%CI 1.0–2.3]); watched >2.5 hours of TV/day/week (OR = 1.6[95%CI 1.0–2.4]). Conclusion We confirm a previously under-recognised risk of VDI in adolescents. The marked higher risk for VDI in non-white children suggests they should be targeted in any preventative strategies. The association of higher risk of VDI among children who exercised less outdoors, watched more TV and were overweight highlights potentially modifiable risk factors. Clearer guidelines and an increased awareness especially in adolescents are needed, as there are no recommendations for vitamin D supplementation in older children