Study of noise reduction characteristics of composite fiber-reinforced panels, interior panel configurations, and the application of the tuned damper concept

The application of fiber reinforced composite materials, such as graphite epoxy and Kevlar, for secondary or primary structures developing in the commercial airplane industry was investigated. A composite panel program was initiated to study the effects of some of the parameters that affect noise reduction of these panels. The fiber materials and the ply orientation were chosen to be variables in the test program. It was found that increasing the damping characteristics of a structural panel will reduce the vibration amplitudes at resonant frequencies with attendant reductions in sound reduction. Test results for a dynamic absorber, a tuned damper, are presented and evaluated

Colour image processing and texture analysis on images of porterhouse steak meat

This paper outlines two colour image processing and texture analysis techniques applied to meat images and assessment of error due to the use of JPEG compression at image capture. JPEG error analysis was performed by capturing TIFF and JPEG images, then calculating the RMS difference and applying a calibration between block boundary features and subjective visual JPEG scores. Both scores indicated high JPEG quality. Correction of JPEG blocking error was trialled and found to produce minimal improvement in the RMS difference. The texture analysis methods used were singular value decomposition over pixel blocks and complex cell analysis. The block singular values were classified as meat or non- meat by Fisher linear discriminant analysis with the colour image processing result used as ‘truth.’ Using receiver operator characteristic (ROC) analysis, an area under the ROC curve of 0.996 was obtained, demonstrating good correspondence between the colour image processing and the singular values. The complex cell analysis indicated a ‘texture angle’ expected from human inspection

Optical full Hadamard matrix multiplexing and noise effects: errata

The model for Poisson random noise under Hadamard multiplexing is revised. The new model accounts for the variation of the Hadamard multiplexed measurements, as well as the previously considered variation due to Poisson fluctuations. A numerical simulation matches the model prediction within uncertainty

Optical full Hadamard matrix multiplexing and noise effects

Hadamard multiplexing provides a considerable SNR boost over additive random noise but Poisson noise such as photon noise reduces the boost. We develop the theory for full H-matrix Hadamard transform imaging under additive and Poisson noise effects. We show that H-matrix encoding results in no effect on average on the noise level due to Poisson noise sources while preferentially reducing additive noise. We use this result to explain the wavelength-dependent varying SNR boost in a Hadamard hyperspectral imager and argue that such a preferential boost is useful when the main noise source is indeterminant or varying

PRICE VERSUS STOCK EFFECT POLICIES FOR REDUCING EXCESS MILK PRODUCTION

This article presents a comparative dynamic analysis of the market impact of alternative U.S. policies designed to reduce excess capacity in milk production. Two policy options are examined based on an econometric model of the dairy industry and a dynamic simulation of the system. The stock effect policy relies on voluntary reductions in cow numbers to reduce milk supplies, while the price effect policy makes use of reductions in the support price levels to achieve the same goal. The simulation results are used to evaluate equilibrium prices and quantities for the farm and retail markets, government costs, and consumer and producer surpluses from 1986 to 1995 for each policy alternative. The analysis shows that farmers are better off under a voluntary supply control program, while consumers are better off under a support price reduction policy.Agricultural and Food Policy, Livestock Production/Industries,

Weak approximation for del Pezzo surfaces of low degree

We prove, via an “arithmetic surjectivity” approach inspired by work of Denef, that weak weak approximation holds for surfaces with two conic fibrations satisfying a general assumption. In particular, weak weak approximation holds for general del Pezzo surfaces of degrees 1 or 2 with a conic fibration

The circulatory impact of dust from dust profile assimilation

We present results from a reanalysis of temperatures, dust columns and dust vertical profiles focussing on the assimilation, distribution and transport of dust in the martian atmosphere. The assimilation of dust vertical information in particular is a valuable technique which has been shown to be of vital importance to a successful assimilation of the martian atmosphere, with the vertical representation of the dust distribution having a critical effect on assimilation results generally. Atmospheric dust is a key driver of the martian circulation. Dust-induced heating and cooling is a potential feedback mechanism for dust lifting, for example, and can modify the circulation to either enhance or suppress dust storm activity. Accurately representing its complex spatial and temporal distribution is therefore crucial for understanding Mars’ atmospheric dynamics and transport

Separating true range measurements from multi-path and scattering interference in commercial range cameras

Time-of-flight range cameras acquire a three-dimensional image of a scene simultaneously for all pixels from a single viewing location. Attempts to use range cameras for metrology applications have been hampered by the multi-path problem, which causes range distortions when stray light interferes with the range measurement in a given pixel. Correcting multi-path distortions by post-processing the three-dimensional measurement data has been investigated, but enjoys limited success because the interference is highly scene dependent. An alternative approach based on separating the strongest and weaker sources of light returned to each pixel, prior to range decoding, is more successful, but has only been demonstrated on custom built range cameras, and has not been suitable for general metrology applications. In this paper we demonstrate an algorithm applied to both the Mesa Imaging SR-4000 and Canesta Inc. XZ-422 Demonstrator unmodified off-the-shelf range cameras. Additional raw images are acquired and processed using an optimization approach, rather than relying on the processing provided by the manufacturer, to determine the individual component returns in each pixel. Substantial improvements in accuracy are observed, especially in the darker regions of the scene