Evaluation of growth performance, carcass characteristics, and methane and CO\u3csub\u3e2\u3c/sub\u3e emissions of growing and finishing cattle raised in extensive or partial-intensive cow-calf production systems

An experiment was conducted over 2 yr to measure performance and greenhouse gas (GHG) emissions of weaned calves from two cow-calf production systems. Crossbred steers and heifers (n = 270, initial body weight (BW) = 207 kg, SD = 35) were used in a randomized complete block design, with treatments applied to the cow-calf system. Treatments were: 1) a traditional system consisting of April to June calving with smooth bromegrass pasture and grazed corn residue as forage resources (TRAD); 2) an alternative system consisting of July to September calving utilizing partial-drylot feeding, summer-planted oats, and corn residue grazing (ALT). Calves from both production systems were weaned at the same age and grown (diet NEg = 1.05 Mcal kg–1) for approximately 117 d. The calves then transitioned to a high-grain finishing diet (year 1: NEg = 1.32 Mcal kg–1; year 2: NEg = 1.39 Mcal kg–1) and fed to a targeted 1.52 cm backfat. Growth performance in the grower phase resulted in greater (P \u3c 0.01) average daily gain (1.39 vs. 1.22 ± 0.02 kg), greater gain:feed (P \u3c 0.01; 0.157 vs. 0.137 ± 0.003) for ALT calves compared to TRAD calves, However, a lower initial BW (P \u3c 0.01; 185 vs. 229 ± 4.9 kg) resulted in a lower ending BW (P \u3c 0.01; 347 vs. 371 ± 2.9 kg) for ALT calves compared to TRAD calves in spite of improved growth performance. In the finisher phase, ALT calves gained less (1.52 vs. 1.81 ± 0.218 kg; P = 0.02), were less efficient (0.139 vs. 173 ± 0.0151; P = 0.01) but exhibited similar hot carcass weights (HCW) (388 vs. 381 ± 3.8 kg; P = 0.14) compared to TRAD calves. Each pen of calves was put into a large pen-scale chamber that continuously measured carbon dioxide (CO2 ) and methane (CH4 ) for 5 d during the grower and finisher phases. The average CH4 and CO2 production per unit of feed intake was used to calculate total GHG emissions over the entire grower and finisher phase. Overall, there were no differences (P ≥ 0.17) between treatments for CH4 per day and per kilogram dry matter intake (DMI). However, ALT calves tended to produce less (P ≤ 0.10) CO2 per day and per kilogram DMI than TRAD calves. Overall, methane emissions were greater in ALT calves (110.7 vs. 92.2 ± 8.3 g CH4 kg–1 HCW; P = 0.04) than TRAD calves. The ALT calves required 27 additional days on feed to market, which resulted in more total CH4 per animal across the entire feeding period (P = 0.02) than TRAD calves. Production systems that reduce days to market to achieve similar HCW may reduce GHG emissions

Feedlot Surface Conditions and Ammonia Emissions

Moisture and urine were applied to a feedlot surface in a 2x2 factorial design. Forced-air wind tunnels were used to determine differences in the net flux of ammonia (NH3) being volatilized. Surface DM, pH and surface temperature were all analyzed within each treatment to determine effect on NH3 net flux. No effects of urine were detected. There were differences detected due to moisture and moisture*time with the dry plots releasing significantly more NH3

Feedlot Surface Conditions and Ammonia Emissions

Moisture and urine were applied to a feedlot surface in a 2x2 factorial design. Forced-air wind tunnels were used to determine differences in the net flux of ammonia (NH3) being volatilized. Surface DM, pH and surface temperature were all analyzed within each treatment to determine effect on NH3 net flux. No effects of urine were detected. There were differences detected due to moisture and moisture*time with the dry plots releasing significantly more NH3

Corn Oil Supplementation on Performance and Methane Production in Finishing Steers

A finishing trial was conducted to evaluate the effects of corn oil on animal performance, carcass characteristics, and methane production in finishing cattle. Corn oil was supplemented at 3% of the diet (dry matterbasis) and led to a decrease in intake, a numerical improvement in average daily gain, and improved feed efficiency compared to the control cattle. Dry matter intake while in the methane barn was not decreased between treatments, although it was numerically similar to what was observed outside of the methane barn. Corn oil did not affect any carcass parameters. Methane production (g/d) was reduced with the inclusion of corn oil compared to the control. Methane (g/lb of gain) was also reduced with the inclusion of corn oil compared to the control. A numerical reduction of methane (g/lb of intake) was observed when corn oil was included in the diet. Corn oil appears to be a viable option for both improving performance as well as decreasing methane production in beef cattle finishing diets

Energy balance and diurnal variation in methane production as affected by feeding frequency in Jersey cows in late lactation

Methane (CH4) production of ruminants typically increases with increased dry matter intake (DMI). However, few studies have observed the effects of feeding multiple times a day and its effects on diurnal variation in CH4 production and energy balance in late-lactation dairy cattle. A study using headbox-style indirect calorimetry and 12 multiparous (225 ± 16.2 d in milk; mean ± SD) lactating Jersey cows was conducted to determine the effects of feeding twice daily on diurnal variation in CH4 production and total energy balance. A crossover design with 14-d periods (10 d of adaption and 4 d of collection) was used to compare 2 treatments. Treatments consisted of either once a day feeding (1×; 100% of feed given at 1000 h) or twice a day feeding (2×; 50% of feed given at 1000 h and the final 50% at 2000 h) with a common diet fed in both treatments. Dry matter intake was not different between treatments, with a mean of 16.9 ± 0.88 kg/d. Once a day feeding tended to have greater milk yield compared with twice a day feeding (21.2 vs. 20.4 ± 1.59 kg/d, respectively). Milk fat and milk protein percentage were not different, with means of 6.18 ± 0.20% and 3.98 ± 0.08%, respectively. Total CH4 production did not differ between treatments, with a mean of 402.1 ± 20.8 L/d. Similarly, CH4 per unit of milk yield and DMI was not different between treatments, with means of 20.5 ± 1.81 and 23.8 ± 1.21 L/kg, respectively. Feeding frequency did not affect diurnal variation of hourly CH4 production, with a mean of 17.1 ± 0.74 L/h. A trend was observed for a treatment × hour interaction. Methane production per hour increased after the second feeding for cattle fed twice versus once daily. Gross energy, digestible energy, metabolizable energy, and balance (milk plus tissue) per kilogram of DMI did not differ by feeding frequency, with means of 4.41 ± 0.01, 3.05 ± 0.03, 2.63 ± 0.03, and 1.32 ± 0.08 Mcal/ kg of DM, respectively. Metabolizable energy for maintenance was 146 kcal/kg of metabolic body weight, with an efficiency of converting metabolizable energy to net energy balance (milk plus tissue) of 76%. Nitrogen balance did not differ among treatments, with a mean balance of 17.3 ± 13.0 g/d. Therefore, total CH4 production and energy maintenance were not affected by feeding frequency. However, CH4 was variable throughout the day, and caution should be exercised when collecting CH4 samples at a limited number of time points because this may under- or overestimate total production

Reducing methane production with corn oil and calcium sulfate: Responses on whole-animal energy and nitrogen balance in dairy cattle

The addition of fat and calcium sulfate to diets fed to ruminants has resulted in a reduction in methane production, but the effects on energy balance have not been studied. A study using indirect calorimetry and 16 multiparous (8 Holstein and 8 Jersey; 78 ± 15 d in milk; mean ± standard deviation) lactating dairy cows was conducted to determine how mitigating methane production by adding corn oil or calcium sulfate to diets containing reduced-fat distillers grains affects energy and nitrogen balance. A replicated 4 × 4 Latin square design with 35-d periods (28 d of adaption and 4 d of collections) was used to compare 4 different dietary treatments. Treatments were composed of a control (CON) diet, which did not contain reduced-fat distillers grain and solubles (DDGS), and treatment diets containing 20% (dry matter basis) DDGS (DG), 20% DDGS with 1.38% (dry matter basis) added corn oil (CO), and 20% DDGS with 0.93% (dry matter basis) added calcium sulfate (CaS). Compared with CON, dry matter intake was not affected by treatment, averaging 29.6 ± 0.67 kg/d. Milk production was increased for diets containing DDGS compared with CON (26.3 vs. 27.8 ± 0.47 kg/d for CON vs. DDGS, respectively), likely supported by increased energy intake. Compared with CON, energy-corrected milk was greater in DG and CO (30.1 vs. 31.4, 31.7, and 31.0 ± 0.67 kg/d for CON, DG, CO, and CaS, respectively). Compared with CON, the addition of calcium sulfate and corn oil to diets containing DDGS reduced methane production per kg of dry matter intake (22.3, 19.9, and 19.6 ± 0.75 L/kg per d for CON, CO, and CaS, respectively). Similarly, methane production per kilogram of energy-corrected milk was reduced with the addition of calcium sulfate and corn oil to diets containing DDGS (14.2, 12.5, and 12.4 ± 0.50 L/kg per d for CON, CO, and CaS, respectively). Compared with CON and CaS, the intake of digestible energy was greater for DG and CO treatments (57.7, 62.1, 62.0, and 59.0 ± 1.38 Mcal/d for CON, DG, CO, and CaS, respectively). Intake of metabolizable energy was greater in all treatments containing DDGS compared with CON (50.5 vs. 54.0 ± 1.08 Mcal/d for CON vs. DDGS, respectively). Net balance (milk plus tissue energy) per unit of dry matter was greater in CO (containing DDGS and oil) than CON (1.55 vs. 1.35 ± 0.06 Mcal/kg for CO vs. CON, respectively). Tissue energy was greater in DG and CO compared with CON (6.08, 7.04, and 3.16 ± 0.99 Mcal/d for DG, CO, and CON, respectively. Results of this study suggest that the addition of oil and calcium sulfate to diets containing DDGS may be a viable option to reduce methane production and in the case of oil also improve net energy balance in lactating dairy cows

Energy balance and diurnal variation in methane production as affected by feeding frequency in Jersey cows in late lactation

Methane (CH4) production of ruminants typically increases with increased dry matter intake (DMI). However, few studies have observed the effects of feeding multiple times a day and its effects on diurnal variation in CH4 production and energy balance in late-lactation dairy cattle. A study using headbox-style indirect calorimetry and 12 multiparous (225 ± 16.2 d in milk; mean ± SD) lactating Jersey cows was conducted to determine the effects of feeding twice daily on diurnal variation in CH4 production and total energy balance. A crossover design with 14-d periods (10 d of adaption and 4 d of collection) was used to compare 2 treatments. Treatments consisted of either once a day feeding (1×; 100% of feed given at 1000 h) or twice a day feeding (2×; 50% of feed given at 1000 h and the final 50% at 2000 h) with a common diet fed in both treatments. Dry matter intake was not different between treatments, with a mean of 16.9 ± 0.88 kg/d. Once a day feeding tended to have greater milk yield compared with twice a day feeding (21.2 vs. 20.4 ± 1.59 kg/d, respectively). Milk fat and milk protein percentage were not different, with means of 6.18 ± 0.20% and 3.98 ± 0.08%, respectively. Total CH4 production did not differ between treatments, with a mean of 402.1 ± 20.8 L/d. Similarly, CH4 per unit of milk yield and DMI was not different between treatments, with means of 20.5 ± 1.81 and 23.8 ± 1.21 L/kg, respectively. Feeding frequency did not affect diurnal variation of hourly CH4 production, with a mean of 17.1 ± 0.74 L/h. A trend was observed for a treatment × hour interaction. Methane production per hour increased after the second feeding for cattle fed twice versus once daily. Gross energy, digestible energy, metabolizable energy, and balance (milk plus tissue) per kilogram of DMI did not differ by feeding frequency, with means of 4.41 ± 0.01, 3.05 ± 0.03, 2.63 ± 0.03, and 1.32 ± 0.08 Mcal/ kg of DM, respectively. Metabolizable energy for maintenance was 146 kcal/kg of metabolic body weight, with an efficiency of converting metabolizable energy to net energy balance (milk plus tissue) of 76%. Nitrogen balance did not differ among treatments, with a mean balance of 17.3 ± 13.0 g/d. Therefore, total CH4 production and energy maintenance were not affected by feeding frequency. However, CH4 was variable throughout the day, and caution should be exercised when collecting CH4 samples at a limited number of time points because this may under- or overestimate total production

PEArL: a systems approach to demonstrating authenticity in information systems design

The process of information systems (IS) design has been dominated by the demands inherent in providing a technical solution to a perceived problem or need. Engineering IS design methods applied in order to satisfy the problem situation tend to have a preoccupation with verifying specifications as being mathematically correct. Diffculties arise when the ideas underpinning verification are extended in an attempt to ‘prove’ the validity of a proposed design for an IS. A pure engineering approach does not facilitate a response to the subjective elements within social situations, which experience has shown to be essential in demonstrating the pertinence of new designs to those concerned. We suggest that, by applying interpretivist systems ideas, it is possible to support concerned individuals in reflecting upon crucial aspects of the inquiry, enabling those individuals to judge the relevance or ‘authenticity’ of the learning, according to their own values and beliefs. The elements of participants, engagement, authority, relationships and learning are suggested as being crucial. These make up the mnemonic PEArL, which is offered as an aide-mémoire for those concerned with IS design

Case Study: Producer concerns and perceptions regarding the effect of methane on cattle production and the environment: A survey of Nebraska producers

Enteric methane production from cattle and its effect on climate change has been a topic of debate. Multiple studies have explored methods to reduce cattle enteric methane production while simultaneously improving performance. However, most strategies developed have not been widely implemented by cattle producers. Knowledge of producer concerns and perceptions on methane production from cattle and its effect on the environment may be limited. Therefore, the objectives of this survey were to determine what Nebraska producers know about methane production by cattle and how it affects performance and to determine whether different age groups, regions of Nebraska, and production size and type affects producer opinions on enteric methane production and climate change. The survey had a response rate of 22%. Regarding climate change, approximately 39% of producers disagreed, 33% were neutral, and 28% agreed they were concerned. However, producers in central and eastern Nebraska were closer to neutral than producers in western Nebraska (P \u3c 0.05). Younger producers perceived cattle to have a more positive effect on the environment and reported that they were more likely to adopt new management techniques that have been shown to improve animal performance than older producers (P \u3c 0.05). Most producers reported receiving production-related information from veterinarians (47.6%), followed by the “other” category (34.9%), the University of Nebraska (15.6%), and state and federal governments, which were the lowest (1.4 and 0.6%, respectively). In the last 3 yr, approximately 57% of producers attended one or fewer extension meetings, but 37% had not attended any extension meetings