230 research outputs found

    A Microelectronic Sensor Device Powered by a Small Implantable Biofuel Cell

    Full text link
    Biocatalytic buckypaper electrodes modified with pyrroloquinoline quinone (PQQ)‐dependent glucose dehydrogenase and bilirubin oxidase for glucose oxidation and oxygen reduction, respectively, were prepared for their use in a biofuel cell. A small (millimeter‐scale; 2×3×2 mm3) enzyme‐based biofuel cell was tested in a model glucose‐containing aqueous solution, in human serum, and as an implanted device in a living gray garden slug (Deroceras reticulatum), producing electrical power in the range of 2–10 μW (depending on the glucose source). A microelectronic temperature‐sensing device equipped with a rechargeable supercapacitor, internal data memory and wireless data downloading capability was specifically designed for activation by the biofuel cell. The power management circuit in the device allowed the optimized use of the power provided by the biofuel cell dependent on the sensor operation activity. The whole system (power‐producing biofuel cell and power‐consuming sensor) operated autonomously by extracting electrical energy from the available environmental source, as exemplified by extracting power from the glucose‐containing hemolymph (blood substituting biofluid) in the slug to power the complete temperature sensor system and read out data wirelessly. Other sensor systems operating autonomously in remote locations based on the concept illustrated here are envisaged for monitoring different environmental conditions or can be specially designed for homeland security applications, particularly in detecting bioterrorism threats.Sluggish sensor? A microelectronic sensor device was powered by an enzyme biofuel cell implanted in a slug to operate autonomously.Peer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/152860/1/cphc201900700_am.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/152860/2/cphc201900700.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/152860/3/cphc201900700-sup-0001-misc_information.pd

    Potencial de resposta à adubação para N, P, K, Ca e Mg em cupuaçueiros avaliados por diferentes normas DRIS .

    Get PDF
    O potencial de resposta à adubação é uma ferramenta utilizada para a interpretação dos valores dos índices DRIS, de forma que pode ser útil para verificar se diferentes grupos de normas resultam em diagnósticos distintos ou semelhantes entre si. Neste sentido, objetivou-se avaliar o comportamento do diagnóstico nutricional, submetidos a cinco grupos de normas DRIS. Para isto, amostras foliares de cupuaçueiros foram coletadas de pomares comerciais, cuja idade das plantas variou de 5 a 18 anos, sob monocultivo e sistemas agroflorestais (SAF?s), obtendo-se para cada relação nutricional entre os nutrientes N, P, K, Ca, Mg, as normas DRIS bivariadas, as quais foram obtidas para o conjunto das populações monitoradas e para subpopulações específicas. As diferentes normas DRIS resultaram em diagnósticos semelhantes para N, P e Ca, enquanto que para K e Mg os diagnósticos produzidos distinguiram-se entre as normas resultando em desvios nutricionais

    Relações nutricionais log-transformadas para avaliação nutricional de cupuaçuzeiros comerciais.

    Get PDF
    A transformação logarítmica das relações bivariadas no cálculo das normas e dos índices do sistema integrado de diagnose e recomendação de nutrientes (DRIS) tem sido sugerida como uma forma de melhorar a acurácia do sistema, principalmente por diminuir a inconsistência na distribuição de freqüência entre as formas de expressão direta e inversa de uma mesma relação. Neste sentido, o objetivo deste trabalho foi avaliar o uso de relações log-transformadas entre diferentes populações de referência. Amostras foliares de cupuaçu foram coletadas de 153 pomares comerciais, cuja idade das plantas variou de 5 a 18 anos, cultivados em monocultivo ou sistemas agroflorestais, obtendo-se para cada relação nutricional entre os nutrientes N, P, K, Ca, Mg, Fe, Cu, Zn, e Mn as normas DRIS bivariadas log-transformadas e não transformadas, obtidas para o conjunto da população e para condições específicas. Os resultados mostraram que as relações log-transformadas contribuem para uma maior consistência dos resultados entre as formas direta e inversa entre diferentes normas DRIS

    Agregação do solo cultivado com gramíneas e leguminosas solteiras e consorciadas na região de Rolim de Moura - Ro.

    Get PDF
    O trabalho objetivou avaliar a estabilidade de agregados em Latossolo Vermelho Amarelo com textura franco argilosa, utilizado com gramíneas e leguminosas em cultivo solteiro e consorciado. O delineamento experimental foi blocos ao acaso em parcela subdividida contento oito tratamentos principais e três secundários em 04 repetições. Os parâmetros analisados foram, diâmetro médio ponderado dos agregados via úmida (DMPAu) e via seca (DMPAs), índice de estabilidade de agregados (IEA) através da relação DMPAu/DMPAs e niveis de matéria orgânica do solo. O Consórcio Brachiaria brizantha + amendoim é mais eficiente na formação de agregados estáveis em água nos primeiros 10 cm de profundidade e o milho solteiro, nos outros 20 cm a Brachiaria brizantha, amendoim, Panicum maximum em cultivo solteiro e o consórcio Panicum maximum + amendoim foram pouco influentes na formação de agregados estáveis em água

    Qualidade de alface crespa cultivada em sistema orgânico, convencional e hidropônico.

    Get PDF
    O objetivo deste trabalho foi avaliar a qualidade da alface do grupo crespa, cv. Vera, em sistemas de cultivo orgânico, convencional e hidropônico em Rio Branco-AC. O experimento foi conduzido em julho de 2009. As amostras dos sistemas, convencional e hidropônico (3 marcas comerciais), foram escolhidas aleatoriamente nos supermercados do município de Rio Branco, no mesmo dia de coleta da alface produzida em sistema orgânico. A alface orgânica, produzida na área experimental do Setor de Agricultura Ecológica da Universidade Federal do Acre (UFAC), em Rio Branco, foi cultivada em estufa, sob plantio direto utilizando folhas de bambu como cobertura do solo, e adubada com composto orgânico (17 t ha-1 em base seca). O delineamento utilizado foi o inteiramente casualizado, com cinco tratamentos e quatro repetições compostas por três plantas. As amostras foram lavadas, cortadas e processadas com folha e caule, para obter o suco. Logo após foram determinados os teores de sólidos solúveis e a concentração de nitrato e ácido ascórbico. As três marcas de alface hidropônica apresentaram maior teor de nitrato e menor concentração de sólidos solúveis e ácidos ascórbico, enquanto a alface orgânica apresentou qualidade superior, com baixa concentração de nitrato e maior teor de ácido ascórbico

    Observation of the Decay Λ0b→Λ+cτ−¯ν

    Get PDF
    The first observation of the semileptonic b-baryon decay Λb0→Λc+τ-ν¯τ, with a significance of 6.1σ, is reported using a data sample corresponding to 3 fb-1 of integrated luminosity, collected by the LHCb experiment at center-of-mass energies of 7 and 8 TeV at the LHC. The τ- lepton is reconstructed in the hadronic decay to three charged pions. The ratio K=B(Λb0→Λc+τ-ν¯τ)/B(Λb0→Λc+π-π+π-) is measured to be 2.46±0.27±0.40, where the first uncertainty is statistical and the second systematic. The branching fraction B(Λb0→Λc+τ-ν¯τ)=(1.50±0.16±0.25±0.23)% is obtained, where the third uncertainty is from the external branching fraction of the normalization channel Λb0→Λc+π-π+π-. The ratio of semileptonic branching fractions R(Λc+)B(Λb0→Λc+τ-ν¯τ)/B(Λb0→Λc+μ-ν¯μ) is derived to be 0.242±0.026±0.040±0.059, where the external branching fraction uncertainty from the channel Λb0→Λc+μ-ν¯μ contributes to the last term. This result is in agreement with the standard model prediction

    Measurement of antiproton production from antihyperon decays in pHe collisions at √sNN=110GeV

    Get PDF
    The interpretation of cosmic antiproton flux measurements from space-borne experiments is currently limited by the knowledge of the antiproton production cross-section in collisions between primary cosmic rays and the interstellar medium. Using collisions of protons with an energy of 6.5 TeV incident on helium nuclei at rest in the proximity of the interaction region of the LHCb experiment, the ratio of antiprotons originating from antihyperon decays to prompt production is measured for antiproton momenta between 12 and 110GeV\!/c . The dominant antihyperon contribution, namely Λ¯ → p¯ π+ decays from promptly produced Λ¯ particles, is also exclusively measured. The results complement the measurement of prompt antiproton production obtained from the same data sample. At the energy scale of this measurement, the antihyperon contributions to antiproton production are observed to be significantly larger than predictions of commonly used hadronic production models

    Observation of the doubly charmed baryon decay Ξcc++→Ξc′+π+

    Get PDF
    The Ξcc++→Ξc′+π+ decay is observed using proton-proton collisions collected by the LHCb experiment at a centre-of-mass energy of 13 TeV, corresponding to an integrated luminosity of 5.4 fb−1. The Ξcc++→Ξc′+π+ decay is reconstructed partially, where the photon from the Ξc′+→Ξc+γ decay is not reconstructed and the pK−π+ final state of the Ξc+ baryon is employed. The Ξcc++→Ξc′+π+branching fraction relative to that of the Ξcc++→Ξc+π+ decay is measured to be 1.41 ± 0.17 ± 0.10, where the first uncertainty is statistical and the second systematic. [Figure not available: see fulltext.
    corecore