10,582 research outputs found
Oscillatory and propagating modes of temperature variability at the 3–3.5- and 4–4.5-yr time scales in the Upper Southwest Pacific Ocean
This paper investigates oscillatory and propagating patterns of normalized surface and subsurface temperature anomalies (from the seasonal cycle) in the southwest Pacific Ocean using an extended empirical orthogonal function (EEOF) analysis. The temperature data (and errors) are from the Digital Atlas of Southwest Pacific upper Ocean Temperatures (DASPOT). These data are 3 monthly in time (January, April, July, and October), 2° X 2° in space, and 5 m in the vertical to 450-m depths. The temperature anomalies in the EEOF analysis are normalized by the objective mapping temperature errors at each grid point. They are also Butterworth filtered in the 3–7-yr band to examine interannual variations in the temperature field. The oscillating and propagating patterns of the modes are examined across four vertical levels: the surface, and 100-, 250-, and 450-m depths. The dominant mode EEOF (70% of the total variance of the filtered data) oscillates in a 4–4.5-yr quasi-periodic manner that is consistent with El Niño–Southern Oscillation (ENSO). Anomalies peak first
at the surface in the subtropics between New Caledonia and Fiji (centered around 17°S, 177°E), then 6 months later in the tropical far west centered around the Solomon Islands (5°S, 153°–157°E), with a maximum at the base of the mixed layer (100 m) and upper thermocline (250 m), and then eastward in the northeast of the southwest Pacific region (0°–10°S, 160°E–180°). Mode 2 (25% variance of the filtered data) has a periodicity of 3–3.5 yr, with centers of action in all four vertical levels. The mode-2 patterns are consistent with variations in the subtropical gyre circulation, including the East Australian Current and its
separation, and are continuous with the Tasman Front. Two spatial dipoles are apparent: (i) one in sea surface temperature (SST) at about 5°S, straddling west–east either side of the Solomon Islands, consistent with the classic Pacific-wide ENSO SST anomaly mode, and (ii) a subsurface dipole pattern, with centers in the Solomon Islands region at 100- and 250-m depths, and the western Tasman Sea (27°–33°S, 157°–161°E) at 250- and 450-m depths, consistent with dynamic changes in the gyre intensity
Recommended from our members
Chemical looping epoxidation
Chemical looping epoxidation of ethylene was demonstrated, whereby the sole oxidant was a solid oxygen carrier, 15 wt% Ag supported on SrFeO3. Ethylene reacted with a bed of carrier particles, without any O2(g) in the feed, to produce ethylene oxide (EO) and CO2. Following the reduction by the C2H4 of the SrFeO3, it was regenerated by passing air through the bed. The rate of reoxidation was slow, with full regeneration being achieved only by prolonged oxidation at elevated temperatures. A striking synergy between Ag and SrFeO3 was observed solely when they were in intimate contact, suggesting a basis for a proposed reaction mechanism
Responding to the crisis: Economic stabilisation grants
This article reviews some of the mainstream policies proposed to tackle the economic crisis of 2008-09 and its aftermath, and goes on to advocate a policy of economic stabilisation grants (ESGs). It argues that ESGs, which would be paid to every citizen at a rate that could be varied according to the severity of the crisis, would be more effective in boosting aggregate demand and more efficient in terms of resource allocation. Unlike the alternatives, ESGs would also address directly two key issues deriving from the process of globalisation, namely the growth of systemic uncertainty and rising inequality
Microbial predation accelerates granulation and modulates microbial community composition.
BackgroundBacterial communities are responsible for biological nutrient removal and flocculation in engineered systems such as activated floccular sludge. Predators such as bacteriophage and protozoa exert significant predation pressure and cause bacterial mortality within these communities. However, the roles of bacteriophage and protozoan predation in impacting granulation process remain limited. Recent studies hypothesised that protozoa, particularly sessile ciliates, could have an important role in granulation as these ciliates were often observed in high abundance on surfaces of granules. Bacteriophages were hypothesized to contribute to granular stability through bacteriophage-mediated extracellular DNA release by lysing bacterial cells. This current study investigated the bacteriophage and protozoan communities throughout the granulation process. In addition, the importance of protozoan predation during granulation was also determined through chemical killing of protozoa in the floccular sludge.ResultsFour independent bioreactors seeded with activated floccular sludge were operated for aerobic granulation for 11 weeks. Changes in the phage, protozoa and bacterial communities were characterized throughout the granulation process. The filamentous phage, Inoviridae, increased in abundance at the initiation phase of granulation. However, the abundance shifted towards lytic phages during the maturation phase. In contrast, the abundance and diversity of protozoa decreased initially, possibly due to the reduction in settling time and subsequent washout. Upon the formation of granules, ciliated protozoa from the class Oligohymenophorea were the dominant group of protozoa based on metacommunity analysis. These protozoa had a strong, positive-correlation with the initial formation of compact aggregates prior to granule development. Furthermore, chemical inhibition of these ciliates in the floccular sludge delayed the initiation of granule formation. Analysis of the bacterial communities in the thiram treated sludge demonstrated that the recovery of 'Candidatus Accumulibacter' was positively correlated with the formation of compact aggregates and granules.ConclusionPredation by bacteriophage and protozoa were positively correlated with the formation of aerobic granules. Increases in Inoviridae abundance suggested that filamentous phages may promote the structural formation of granules. Initiation of granules formation was delayed due to an absence of protozoa after chemical treatment. The presence of 'Candidatus Accumulibacter' was necessary for the formation of granules in the absence of protozoa
Recommended from our members
Improving hydrogen yields, and hydrogen: Steam ratio in the chemical looping production of hydrogen using Ca<inf>2</inf>Fe<inf>2</inf>O<inf>5</inf>
A thermodynamic property of Ca2Fe2O5 was exploited to improve the efficiency of the steam-iron process to produce hydrogen. The ability of reduced Ca2Fe2O5 to convert a higher fraction of steam to hydrogen than chemically unmodified Fe was demonstrated in a packed bed. At 1123 K, the use of Ca2Fe2O5 achieved an equilibrium conversion of steam to hydrogen of 75%, in agreement with predicted thermodynamics and substantially higher than that theoretically achievable by iron oxide, viz. 62%. Furthermore, in Ca2Fe2O5, the full oxidation from Fe(0) to Fe(III) can be utilised for hydrogen production – an improvement from the Fe to Fe3O4 transition for unmodified iron. Thermodynamic considerations demonstrated in this study allow for the rational design of oxygen carriers in the future. Modifications of reactors to capitalise on this new material are discussed.Dr Matthew T. Dunstan is acknowledged for help with the XRD analysis. M.S.C.C acknowledges financial support from an EPSRC Doctoral Training Grant. W.L and Y.Y acknowledge funding from the National Research Foundation (NRF), Prime Minister’s Office, Singapore under its Campus for Research Excellence and Technological Enterprise (CREATE) programme.This is the final version of the article. It first appeared from Elsevier via http://dx.doi.org/10.1016/j.cej.2016.03.13
Buttressing staples with cholecyst-derived extracellular matrix (CEM) reinforces staple lines in an ex vivo peristaltic inflation model
This is the author's accepted manuscript. The final published article is available from the link below. Copyright @ Springer Science + Business Media, LLC 2008Background - Staple line leakage and bleeding are the most common problems associated with the use of surgical staplers for gastrointestinal resection and anastomotic procedures. These complications can be reduced by reinforcing the staple lines with buttressing materials. The current study reports the potential use of cholecyst-derived extracellular matrix (CEM) in non-crosslinked (NCEM) and crosslinked (XCEM) forms, and compares their mechanical performance with clinically available buttress materials [small intestinal submucosa (SIS) and bovine pericardium (BP)] in an ex vivo small intestine model.
Methods - Three crosslinked CEM variants (XCEM0005, XCEM001, and XCEM0033) with different degree of crosslinking were produced. An ex vivo peristaltic inflation model was established. Porcine small intestine segments were stapled on one end, using buttressed or non-buttressed surgical staplers. The opened, non-stapled ends were connected to a peristaltic pump and pressure transducer and sealed. The staple lines were then exposed to increased intraluminal pressure in a peristaltic manner. Both the leak and burst pressures of the test specimens were recorded.
Results - The leak pressures observed for non-crosslinked NCEM (137.8 ± 22.3 mmHg), crosslinked XCEM0005 (109.1 ± 14.1 mmHg), XCEM001 (150.1 ± 16.0 mmHg), XCEM0033 (98.8 ± 10.5 mmHg) reinforced staple lines were significantly higher when compared to non-buttressed control (28.3 ± 10.8 mmHg) and SIS (one and four layers) (62.6 ± 11.8 and 57.6 ± 12.3 mmHg, respectively) buttressed staple lines. NCEM and XCEM were comparable to that observed for BP buttressed staple lines (138.8 ± 3.6 mmHg). Only specimens with reinforced staple lines were able to achieve high intraluminal pressures (ruptured at the intestinal mesentery), indicating that buttress reinforcements were able to withstand pressure higher than that of natural tissue (physiological failure).
Conclusions - These findings suggest that the use of CEM and XCEM as buttressing materials is associated with reinforced staple lines and increased leak pressures when compared to non-buttressed staple lines. CEM and XCEM were found to perform comparably with clinically available buttress materials in this ex vivo model.Enterprise Irelan
Middle East respiratory syndrome coronavirus (MERS-CoV) in dromedary camels in Nigeria, 2015
Evidence of current and past Middle East respiratory syndrome coronavirus (MERS-CoV) infection in dromedary camels slaughtered at an abattoir in Kano, Nigeria in January 2015, was sought by reverse transcription-quantitative polymerase chain reaction (RT-qPCR) and serology. MERS-CoV RNA was detected in 14 (11%) of 132 nasal swabs and antibody in 126 (96%) of 131 serum samples. Phylogenetic analyses demonstrate that the viruses in Nigeria are genetically distinct from those reported in the Arabian peninsula.published_or_final_versio
No Black Hole Theorem in Three-Dimensional Gravity
A common property of known black hole solutions in (2+1)-dimensional gravity
is that they require a negative cosmological constant. In this letter, it is
shown that a (2+1)-dimensional gravity theory which satisfies the dominant
energy condition forbids the existence of a black hole to explain the above
situation.Comment: 3 pages, no figures, to be published in Physical Review Letter
Recommended from our members
Distribution of halon-1211 in the upper troposphere and lower stratosphere and the 1994 total bromine budget
- …